Text preview for : 4095.pdf part of ST 4095 GATED J-K MASTER SLAVE FLIP-FLOP



Back to : 4095.pdf | Home

HCF4095B
GATED J-K MASTER SLAVE FLIP-FLOP
s

s s

s s

s s

16MHz TOGGLE RATE (Typ.) at VDD - VSS = 10V GATED INPUTS QUIESCENT CURRENT SPECIFIED UP TO 20V 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE CURRENT II = 100nA (MAX) AT VDD = 18V TA = 25°C 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC JESD13B "STANDARD SPECIFICATIONS FOR DESCRIPTION OF B SERIES CMOS DEVICES"

DIP

SOP

ORDER CODES
PACKAGE DIP SOP TUBE HCF4095BEY HCF4095BM1 T&R HCF4095M013TR

DESCRIPTION HCF4095B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. HCF4095B is J-K Master-Slave Flip-Flops featuring separate AND gating of multiple J and K inputs. The gated J-K input control transfers

information into the master section during clocked operation. Information on the J-K inputs is transferred to the Q and Q outputs on the positive edge of the clock pulse. SET and RESET inputs (active high) are provided for asynchronous operation.

PIN CONNECTION

September 2002

1/11

HCF4095B
INPUT EQUIVALENT CIRCUIT PIN DESCRIPTION
PIN No 3, 4, 5 11, 10, 9 8 6 13 2 12 1 7 14 SYMBOL J1 to J3 K1 to K3 Q Q SET (S) RESET (R) CLOCK NC VSS VDD NAME AND FUNCTION J Inputs K Inputs Q Output Q Output Set Inputs(Active High) Reset Inputs(Active High) Clock Inputs Not Connected Negative Supply Voltage Positive Supply Voltage

TRUTH TABLE : SYNCHRONOUS OPERATION (S=0 R=0)
INPUTS BEFORE POSITIVE CLOCK TRANSITION J* L L H H
(*) : J=J1 · J2 · J3, K=K1 · K2 · K3

OUTPUTS AFTER POSITIVE CLOCK TRANSITION Q NO CHANGE L H TOGGLES H L Q

K* L H L H

TRUTH TABLE : ASYNCHRONOUS OPERATION (J and K DON'T CARE)
INPUTS BEFORE POSITIVE CLOCK TRANSITION S L L H H
(*) : L = Vss, H = Vdd

OUTPUTS AFTER POSITIVE CLOCK TRANSITION Q NO CHANGE L H L H L L Q

R L H L H

2/11

HCF4095B
FUNCTIONAL DIAGRAM

LOGIC DIAGRAM

3/11

HCF4095B
ABSOLUTE MAXIMUM RATINGS
Symbol VDD VI II PD Top Tstg Supply Voltage DC Input Voltage DC Input Current Power Dissipation per Package Power Dissipation per Output Transistor Operating Temperature Storage Temperature Parameter Value -0.5 to +22 -0.5 to VDD + 0.5 ± 10 200 100 -55 to +125 -65 to +150 Unit V V mA mW mW °C °C

Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to VSS pin voltage.

RECOMMENDED OPERATING CONDITIONS
Symbol VDD VI Top Supply Voltage Input Voltage Operating Temperature Parameter Value 3 to 20 0 to VDD -55 to 125 Unit V V °C

DC SPECIFICATIONS
Test Condition Symbol Parameter VI (V) 0/5 0/10 0/15 0/20 0/5 0/10 0/15 5/0 10/0 15/0 0.5/4.5 1/9 1.5/13.5 4.5/0.5 9/1 13.5/1.5 2.5 4.6 9.5 13.5 0.4 0.5 1.5 VO (V) |IO| VDD (µA) (V) 5 10 15 20 5 10 15 5 10 15 5 10 15 5 10 15 5 5 10 15 5 10 15 TA = 25°C Min. Typ. 0.02 0.02 0.02 0.04 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 -1.36 -0.44 -1.1 -3.0 0.44 1.1 3.0 -3.2 -1 -2.6 -6.8 1 2.6 6.8 -1.15 -0.36 -0.9 -2.4 0.36 0.9 2.4 3.5 7 11 1.5 3 4 -1.1 -0.36 -0.9 -2.4 0.36 0.9 2.4 Max. 1 2 4 20 4.95 9.95 14.95 0.05 0.05 0.05 3.5 7 11 1.5 3 4 Value -40 to 85°C Min. Max. 30 60 120 600 4.95 9.95 14.95 0.05 0.05 0.05 -55 to 125°C Min. Max. 30 60 120 600 Unit

IL

Quiescent Current

µA

VOH

High Level Output Voltage Low Level Output Voltage High Level Input Voltage Low Level Input Voltage Output Drive Current

VOL

VIH

VIL

IOH

IOL

Output Sink Current

0/5 0/5 0/10 0/15 0/5 0/10 0/15

<1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1

V

V

V

V

mA

mA

4/11

HCF4095B

Test Condition Symbol Parameter VI (V) 0/18 VO (V) |IO| VDD (µA) (V) 18 TA = 25°C Min. Typ. ±10-5 5 Max.

Value -40 to 85°C Min. Max. -55 to 125°C Min. Max. Unit

II

CI

Input Leakage Current Input Capacitance

Any Input Any Input

±0.1
7.5

±1

±1

µA
pF

The Noise Margin for both "1" and "0" level is: 1V min. with VDD =5V, 2V min. with VDD=10V, 2.5V min. with VDD=15V

DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25°C, CL = 50pF, RL = 200K, tr = tf = 20 ns)
Test Condition Symbol Parameter VDD (V) 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 Min. Value (*) Typ. 250 100 75 150 75 50 100 50 40 7 16 24 70 30 20 Max. 500 200 150 300 150 100 200 100 80 ns Unit

tPLH tPHL Propagation Delay Time

tPLH tPHL Propagation Delay Time (Set or Reset) tTLH tTHL Transition Time

ns

ns

fCL

Maximum Clock Input Frequency Clock Pulse Width

tW

3.5 8 12 140 60 40

MHz

ns 15 5 5

tr, tf

Clock input Rise or Fall Time

µs

tW

Set or Reset Pulse Width

tsetup

Data Setup Time

200 100 50 400 160 100

100 50 25 200 80 50

ns

ns

(*) Typical temperature coefficient for all VDD value is 0.3 %/°C.

5/11

HCF4095B
TEST CIRCUIT

CL = 50pF or equivalent (includes jig and probe capacitance) RL = 200K RT = ZOUT of pulse generator (typically 50)

WAVEFORM : PROPAGATION DELAY, TRANSITION AND SETUP TIME

6/11

HCF4095B
WAVEFORM : CLOCK PULSE, RISE AND FALL TIME

TYPICAL APPLICATION: T-TYPE FLIP-FLOP

7/11

HCF4095B
TYPICAL APPLICATION: SYNCHRONOUS BINARY DIVIDE BY TEN COUNTER

TRUTH TABLE
STATE 0 1 2 3 4 5 6 7 8 9 QA L H L H L H L H L H QB L L H H L L H H L L QC L L L L H H H H L L QD L L L L L L L L H H

NOTE: In all units the Set and Reset are Connected to VSS .

8/11

HCF4095B

Plastic DIP-14 MECHANICAL DATA
mm. DIM. MIN. a1 B b b1 D E e e3 F I L Z 1.27 3.3 2.54 0.050 8.5 2.54 15.24 7.1 5.1 0.130 0.100 0.51 1.39 0.5 0.25 20 0.335 0.100 0.600 0.280 0.201 1.65 TYP MAX. MIN. 0.020 0.055 0.020 0.010 0.787 0.065 TYP. MAX. inch

P001A
9/11

HCF4095B

SO-14 MECHANICAL DATA
DIM. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 8.55 5.8 1.27 7.62 4.0 5.3 1.27 0.68 8 ° (max.) 0.149 0.181 0.019 8.75 6.2 0.35 0.19 0.5 45° (typ.) 0.336 0.228 0.050 0.300 0.157 0.208 0.050 0.026 0.344 0.244 0.1 mm. MIN. TYP MAX. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.019 0.003 MIN. inch TYP. MAX. 0.068 0.007 0.064 0.018 0.010

PO13G
10/11

HCF4095B

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. © http://www.st.com

11/11