Text preview for : TECRA 9000 SERIES pt1.pdf part of Toshiba Tecra 9000 I need the service/repair manual, please? Too big for 1 file, split to 3



Back to : TECRA 9000 SERIES pt1.pdf | Home

FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM

9000 Series
GENERAL INFORMATION

Tools Required for Proper Disassembly and Reassembly: 1. Phillips Screwdriver (Size 0&1) 2. Flat head Screwdriver 3. Security Torx (Size 7) 4. Case Separator 5. ESD Wrist Strap 6. ESD mats 7. Tweezers

Before attempting any of the following procedures, make sure that the main battery and AC adaptor is not connected to the unit and the environment in which you are working on is protected from Electro-Static Discharge(ESD).

Tough Enough for Today's World.

TOSHIBA

FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra 9000 Series
TM

TABLE OF CONTENTS:
1. BATTERY PACK REMOVAL 2. OPTIONAL PC CARD REMOVAL 3. SELECT BAY REMOVAL 4. CD-R/W/DVD-ROM DRIVE DISASSEMBLY 5. MEMORY MODULE REMOVAL 6. BLUETOOTH CARD REMOVAL 7. HDD REMOVAL 8. KEYBOARD REMOVAL 9. MODEM BOARD REMOVAL 10 WIRELESS LAN CARD REMOVAL 11. TOP COVER REMOVAL 12. COOLING MODULE REMOVAL 13. CPU REMOVAL 14. MICROPHONE REMOVAL 15. SD/SOUND BOARD REMOVAL 16. RTC BATTERY REMOVAL 17. LED/BLUETOOTH BOARD REMOVAL 18. TOP PCB REMOVAL 19. BOTTOM PCB REMOVAL 20. MEMBRANE SWITCH REMOVAL 21. SPEAKERS REMOVAL 22. 14.1'' DISPLAY MASK REMOVAL 23. FL INVERTER AND 14.1'' LCD REMOVAL

Tough Enough for Today's World.

TOSHIBA

FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra 9000 Series
BATTERY PACK REMOVAL OPTIONAL PC CARD REMOVAL
TM

Release lever Battery Pack Eject button 1. Turn the computer upside down as shown. 2. Slide the battery release lever in the direction of the arrow. 3. Lift out the battery.

PC card

1. Press the eject button for the PC card you want to remove. 2. Press the extended eject button to pop the PC Card out. 3. Grasp the PC card and remove it. NOTE: Before removing any PC Card device, make sure it is "STOPPED" in the PC Card manager.

SELECT BAY REMOVAL

CD-R/W/DVD-ROM DRIVE DISASSEMBLY
CD-R/W/DVD-ROM drive

Base cover

Connector Release lever Select bay device

M2x3 silver screws

1. Turn the computer upside down. 2. Slide the release lever in the direction of the arrow. 3. Pull out the select bay device in the direction of the arrow.

M2x8 silver Connector cover screws 1. Remove five M2x3 silver screws securing the base cover and lift off the base cover. 2. Remove two M2x8 silver screws securing the connector cover. 3. Remove the connector and the connector cover from the CD- R/W/DVD-ROMdrive.

Tough Enough for Today's World.

TOSHIBA

FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra 9000 Series
MEMORY MODULE REMOVAL
TM

M2.5x2.8 silver flat head screws

Memory cover 1. Turn the computer upside down. 2. Remove two M2.5x2.8 silver flat head screws and remove the memory cover.

Memory clips 3. Spread the memory clips outward and pull the memory module out of the connector on a 45 degree angle.

BLUETOOTH CARD REMOVAL

Bluetooth cover

M2x4 black security torx screw

Plastic insulator

Bluetooth card

Coaxial cable

1. Remove one M2x4 black security torx screw securing the bluetooth cover. 2. Lift out the bluetooth cover.

3. Disconnect the coaxial cable from the bluetooth card. 4. Lift up the plastic insulator to disconnect the card.

Tough Enough for Today's World.

TOSHIBA

FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra 9000 Series
HDD REMOVAL HDD REMOVAL
TM

M2.5x8 silver screw HDD cover 1. Turn the computer upside down. 2. Remove one M2.5x8 silver screw securing HDD cover. 3. Remove the HDD cover.

Plastic Tab

HDD pack

4. Unfold the plastic tab and pull to remove the HDD from the bay.

KEYBOARD REMOVAL
HDD bracket HDD

HDD connector

M3x4 flat head brass screws

M2.5x16 silver screw 1. Turn the computer upside down. 2. Remove one M2.5x16 silver screw securing the keyboard on the bottom cover.

5. Remove four M3x4 brass flat head screws securing the HDD to the bracket and lift the drive out of the bracket. 6. Unplug the HDD connector from the drive.

Tough Enough for Today's World.

TOSHIBA