Text preview for : en_4j2_9m0.pdf part of Daewoo Nubira/Lacetti Also known as: Chevrolet Nubira / Lacetti, Chevrolet Optra Optra5, Suzuki Forenza Reno Covers the 1.4L, 1.6L and 1.8L engine. Year 2004



Back to : Service Manual - Daewoo L | Home

SECTION : 9M

EXTERIOR TRIM
TABLE OF CONTENTS
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 9M­1 Fastener Tightening Specifications . . . . . . . . . . . 9M­1 MAINTENANCE AND REPAIR . . . . . . . . . . . . . . . ON­VEHICLE SERVICE . . . . . . . . . . . . . . . . . . . . . B­Pillar Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . Roof Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9M­2 9M­2 9M­2 9M­2 Mud Guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9M­3 Hatchback Rear Spoiler . . . . . . . . . . . . . . . . . . . . 9M­3 GENERAL DESCRIPTION AND SYSTEM OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9M­5 Emblems and Lettering . . . . . . . . . . . . . . . . . . . . . 9M­5 Mud Guards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9M­5

SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Application B­Pillar Molding Screws Mud Guard Bolts NSm 1.3 2 Lb­Ft ­ ­ Lb­In 12 18

9M ­ 2IEXTERIOR TRIM

MAINTENANCE AND REPAIR
ON­VEHICLE SERVICE B­PILLAR MOLDING
Removal Procedure
1. 2. 3. Remove the outside channel molding. Refer to Section 9P, Doors. Reposition the weatherstrip in order to access the screws. Remove the screws and the B­pillar molding (front door B­pillar molding shown, rear door C­pillar molding similar).

Installation Procedure
Notice : Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion. 1. Install the screws and the B­pillar molding (front door B­pillar molding shown, rear door C­pillar molding similar).

Tighten
2. 3. Tighten the B­pillar molding screws to 1.3 NSm 12 (lb­in). Install the weatherstrip to its original position. Install the outside channel molding. Refer to Section 9P, Doors.

ROOF MOLDING
Removal Procedure
1. Remove the roof molding from the metal clips.

DAEWOO V­121 BL4

EXTERIOR TRIM 9M ­ 3 Installation Procedure
1. Press the roof molding onto the metal clips.

MUD GUARDS
Removal Procedure
1. Remove the screw and the bolts and the mud guard.

Installation Procedure
Notice : Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion. 1. Install the mud guard with the bolts and the screw.

Tighten
Tighten the mud guard bolts to 2 NSm (18 lb­in).

HATCHBACK REAR SPOILER
Removal Procedure
1. 2. 3. Open the tailgate. Remove the Hatchback Door upper Garnish molding. Remove the rear spoiler from the tailgate.

J4D39M01

DAEWOO V­121 BL4

9M ­ 4IEXTERIOR TRIM Installation Procedure
1. Install the rear spoiler on the tailgate with the nuts.

J4D39M01

DAEWOO V­121 BL4

EXTERIOR TRIM 9M ­ 5

GENERAL DESCRIPTION AND SYSTEM OPERATION
EMBLEMS AND LETTERING
The emblems and lettering on the vehicle are attached by adhesive. The company emblem appears on the hood. The lettering, which appears in several places on the body of the vehicle, features the model, the grade, and the company name.

MUD GUARDS
Front and rear mud guards are standard equipment on all models. Mud guards will help prevent an excessive buildup of mud on the body.

DAEWOO V­121 BL4