Text preview for : Pioneer+PDP-436PE.pdf part of Pioneer Pioneer+PDP-436PE Pioneer Plasma TV PDP-436PE Pioneer+PDP-436PE.pdf



Back to : Pioneer+PDP-436PE.pdf | Home

ORDER NO.
ARP3271
PDP-436PE

PLASMA DISPLAY


PDP-436PE
PDP-436PU
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model Type Power Requirement Remarks
PDP-436PE WYVI AC220 - 240V
PDP-436PU KUCXC AC120V




This service manual should be used together with the following manual(s).
Model No. Order No. Remarks
PDP-436PE, PDP-436PU ARP3272 SCHEMATIC DIAGRAM, PCB CONNECTION DIAGRAM


Note:
Media Receivers up to Generation 5 (G5) cannot be connected with this unit.
Be sure to use a Media Receiver of Generation 6 (G6) (ex.: PDP-R06, etc.).




For details, refer to "Important Check Points for good servicing".


PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2005
T-IZR SEPT. 2005 printed in Japan
1 2 3 4

SAFETY INFORMATION

A


This service manual is intended for qualified service technicians ; it is not meant for the casual
do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been
trained to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may
void the warranty. If you are not qualified to perform the repair of this product properly and safely,
you should not risk trying to do so and refer the repair to a qualified service technician.

WARNING
This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to
B cause cancer, birth defects or other reproductive harm.
Health & Safety Code Section 25249.6 - Proposition 65


NOTICE
(FOR CANADIAN MODEL ONLY)
Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacement parts
must be of identical designation.

REMARQUE
(POUR MOD