Text preview for : Panel_AUO_B140XW02_V1_0_[DS].pdf part of . Various Panel AUO B140XW02 V1 0 [DS] . Various LCD Panels Panel_AUO_B140XW02_V1_0_[DS].pdf
Back to : Panel_AUO_B140XW02_V1_0_[ | Home
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specification
( V ) Final Specification
Module 14.0" (13.97") HD 16:9 Color TFT-LCD
with LED Backlight design
Model Name B140XW02 V1 (3A)
Note ( ) LED Backlight with driving circuit design
Customer Date Approved by Date
Sony Bonnie Chen 07/10/2009
Checked &
Date Prepared by Date
Approved by
Jonken Fan 07/10/2009
Note: This Specification is subject to change NBBU Marketing Division
without notice. AU Optronics corporation
B140XW02 V1 Document Version : 1.0 1 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Contents
+DQGOLQJ 3UHFDXWLRQV
*HQHUDO 'HVFULSWLRQ
2.1 General Specification...........................................................................................................................5
2.2 Optical Characteristics.........................................................................................................................6
)XQFWLRQDO %ORFN 'LDJUDP
$EVROXWH 0D[LPXP 5DWLQJV
4.1 Absolute Ratings of TFT LCD Module .............................................................................................12
4.2 Absolute Ratings of Environment......................................................................................................12
(OHFWULFDO &KDUDFWHULVWLFV
5.1 TFT LCD Module..............................................................................................................................13
5.2 Backlight Unit....................................................................................................................................15
6LJQDO ,QWHUIDFH &KDUDFWHULVWLF
6.1 Pixel Format Image............................................................................................................................16
6.2 The Input Data Format ......................................................................................................................17
6.3 Integration Interface Requirement ....................................................................................................18
6.4 Interface Timing.................................................................................................................................20
3DQHO 5HOLDELOLW\ 7HVW
7.1 Vibration Test.....................................................................................................................................23
7.2 Shock Test..........................................................................................................................................23
7.3 Reliability Test ...................................................................................................................................23
0HFKDQLFDO &KDUDFWHULVWLFV
8.1 LCM Outline Dimension ...................................................................................................................24
6KLSSLQJ DQG 3DFNDJH
9.1 Shipping Label Format.......................................................................................................................26
9.2 Carton Package..................................................................................................................................27
9.3 Shipping Package of Palletizing Sequence ........................................................................................27
$SSHQGL[ (',' 'HVFULSWLRQ
B140XW02 V1 Document Version : 1.0 2 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration
or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
nor tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Disconnecting power supply before handling LCD modules, it can prevent electric shock,
DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT
module that a LED light bar build in as a light source of back light unit. It can prevent
electronic breakdown.
B140XW02 V1 Document Version : 1.0 4 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
2. General Description
B140XW02 V1 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel,
a driver circuit, and LED backlight system. The screen format is intended to support the 16:9
HD, 1366(H) x768(V) screen and 262k colors (RGB 6-bits data driver) with LED backlight
driving circuit. All input signals are LVDS interface compatible.
B140XW02 V1 is designed for a display unit of notebook style personal computer and
industrial machine.
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:
Items Unit Specifications
Screen Diagonal [mm] 354, 14.0"(13.97")
Active Area [mm] 309.399 x 173.952
Pixels H x V 1366 x 3(RGB) x 768
Pixel Pitch [mm] 0.2265 x 0.2265
Pixel Format B.G.R. Vertical Stripe
Display Mode Normally White
White Luminance (ILED=20mA) [cd/m2] 200 typ. (5 points average)
(Note: ILED is LED current) 170 min. (5 points average)
Luminance Uniformity 1.25 max. (5 points)
Contrast Ratio 500 typ
Response Time [ms] 8 typ / 16 Max
Nominal Input Voltage VDD [Volt] +3.3 typ.
Power Consumption [Watt] 4.5 max. (Include Logic and Blu power)
Weight [Grams] 320 max.
Min. Typ. Max.
Physical Size Length 319.9 320.4 320.9
[mm]
Include bracket Width 204.6 205.1 205.6
Thickness - - 3.6
Electrical Interface 1 channel LVDS
Glass Thickness [mm] 0.5
Glare, Hardness 3H,
Surface Treatment
Reflection 4.3%
B140XW02 V1 Document Version : 1.0 5 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
3. Functional Block Diagram
The following diagram shows the functional block of the 14.0 inches wide Color TFT/LCD 40 Pin one channel
Module
B140XW02 V1 Document Version : 1.0 11 of 30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
4. Absolute Maximum Ratings
An absolute maximum rating of the module is as following:
4.1 Absolute Ratings of TFT LCD Module
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage Vin -0.3 +4.0 [Volt] Note 1,2
4.2 Absolute Ratings of Environment
Item Symbol Min Max Unit Conditions
o
Operating Temperature TOP 0 +50 [ C] Note 4
Operation Humidity HOP 5 95 [%RH] Note 4
o
Storage Temperature TST -20 +60 [ C] Note 4
Storage Humidity HST 5 95 [%RH] Note 4
Note 1: At Ta (25 )
Note 2: Permanent damage to the device may occur if exceed maximum values
Note 3: LED specification refer to section 5.2
Note 4: For quality performance, please refer to AUO IIS (Incoming Inspection Standard).
Twb=39