Text preview for : Panel_AUO_B170UW01_V1_0_[DS].pdf part of . Various Panel AUO B170UW01 V1 0 [DS] . Various LCD Panels Panel_AUO_B170UW01_V1_0_[DS].pdf
Back to : Panel_AUO_B170UW01_V1_0_[ | Home
ww
www.DataSheet4U.net
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
B170UW01 V1
( ) Preliminary Specifications
( V ) Final Specifications
Module 17.0" WUXGA Color TFT-LCD
Model Name B170UW01 V1
Customer Date Approved by Date
Beyond Yang May 28, 2007
Checked &
Prepared by
Approved by
Amy Tu May 28, 2007
Note: This Specification is subject to change without MDBU Marketing Division /
notice. AU Optronics corporation
document version 1.1 1/36
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
ww
www.DataSheet4U.net
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
B170UW01 V1
Contents
1. Handling Precautions.............................................................................................................. 4
2. General Description................................................................................................................. 5
2.1 General Specification......................................................................................................... 5
2.2 Optical Characteristics....................................................................................................... 6
3. Functional Block Diagram .................................................................................................... 11
4. Absolute Maximum Ratings.................................................................................................. 12
4.1 Absolute Ratings of TFT LCD Module ............................................................................. 12
4.2 Absolute Ratings of Backlight Unit ................................................................................... 12
5. Electrical characteristics ...................................................................................................... 13
5.1 TFT LCD Module ............................................................................................................. 13
5.2 Backlight Unit................................................................................................................... 15
6. Signal Characteristic ............................................................................................................. 17
6.1 Pixel Format Image.......................................................................................................... 17
6.2 The input data format....................................................................................................... 18
6.3 Signal Description/Pin Assignment .................................................................................. 20
6.4 Interface Timing ............................................................................................................... 22
7. Connector Description .......................................................................................................... 25
7.1 TFT LCD Module ............................................................................................................. 25
7.2 Backlight Unit................................................................................................................... 25
7.3 Signal for Lamp connector............................................................................................... 25
8. Reliability................................................................................................................................ 26
9. Mechanical Characteristics .................................................................................................. 28
9.1 LCM Outline Dimension................................................................................................... 28
9.2 Screw Hole Depth and Center Position ........................................................................... 30
10. Shipping and Package ........................................................................................................ 31
10.1 Shipping Label Format................................................................................................... 31
10.2. Carton package ............................................................................................................ 32
11.3 Shipping package of palletizing...................................................................................... 32
11. Appendix: EDID description ............................................................................................... 33
document version 1.1 2/36
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
ww
www.DataSheet4U.net
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
B170UW01 V1
Record of Revision
Version and Date Page Old description New Description Remark
0.1 2007/02/26 All Initialize the Preliminary Specification
1.0 2007/05/21 All Finalize the specification
nd
1.1 2007/05/28 31 Add driver IC 2 source
document version 1.1 3/36
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
ww
www.DataSheet4U.net
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
B170UW01 V1
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration
or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it
was taken out from the container, do not press the center of the CCFL Reflector
edge. Instead, press at the far ends of the CCFL Reflector edge softly. Otherwise
the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
nor tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow
local ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
14) The LCD module is designed so that the CCFL in it is supplied by Limited Current Circuit
(IEC60950 or UL1950). Do not connect the CCFL in Hazardous Voltage Circuit.
document version 1.1 4/36
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
ww
www.DataSheet4U.net
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
B170UW01 V1
2. General Description
B170UW01 V0 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD
panel, a driver circuit, and backlight system. The screen format is intended to support the
WUXGA (1920(H) x 1200(V)) screen and 262k colors (RGB 6-bits data driver). All input
signals are LVDS interface compatible. Inverter of backlight is not included.
B170UW01 V0 is designed for a display unit of notebook style personal computer and
industrial machine.
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:
Items Unit Specifications
Screen Diagonal [mm] 431.8
Active Area [mm] 367.20(H) x 229.50(V)
Pixels H x V 1920 x 3(RGB) x 1200
Pixel Pitch [mm] 0.191(per one triad) x 0.191
Pixel Arrangement R,G,B Vertical Stripe
Display Mode Normally White
2
White Luminance (ICCFL=6.5mA) [cd/m ] 200 min. / 240 typ. (5 points average)
Note: ICCFL is lamp current (Note1)
Luminance Uniformity 1.25 max. (5 points average)
1.8 max. (13 points average)
Contrast Ratio 500 min. / 600 typ.
Optical Rise Time/Fall Time [msec] 8 typ. / 12 max.
Nominal Input Voltage VDD [Volt] +3.3 typ.
Power Consumption [Watt] 3.0 max (Without B/L)
10.0 max (With B/L)
Weight (Without Inverter) [Grams] 650 typ., 680g max.
Physical Size [mm] 382.7 max.(W) x 244.8 max.(H) x 6.6
max. (T)
Electrical Interface 6bit, 2 channels LVDS
Surface Treatment Anti-Glare
Support Color Native 262K colors(RGB 6-bit data)
Temperature Range
Operating [oC] 0 to +50
o
Storage (Non-Operating) [ C] -20 to +60
RoHS Compliance RoHS Compliance
document version 1.1 5/36
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
ww
www.DataSheet4U.net
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
B170UW01 V1
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature):
Item Unit Conditions Min. Typ. Max. Note
2
White Luminance [cd/m ] 5 points average 200 240 - 1, 4, 5.
ICCFL=6.5mA
Viewing Angle [degree] Horizontal (Right) 60 70 - 9
[degree] CR = 10 (Left)
60 70 -
[degree] Vertical (Upper) 40 60 -
[degree] CR = 10 (Lower)
50 60 -
Luminance Uniformity 5 Points - - 1.25 1
Luminance Uniformity 13 Points - - 1.8 2
CR: Contrast Ratio 500 600 - 6
Cross talk % - - 4 7
Response Time [msec] Rising - - - 8
[msec] Falling - - -
[msec] Rising + Falling - 8 12
Color / Chromaticity Red x 0.560 0.580 0.600 2,9
Coordinates Red y
(CIE 1931) 0.320 0.340 0.360
Green x 0.290 0.310 0.330
Green y 0.530 0.550 0.570
Blue x 0.135 0.155 0.175
Blue y 0.135 0.155 0.175
White x 0.283 0.313 0.343
White y 0.299 0.329 0.359
NTSC Ratio % CIE 1931 42 45 -
document version 1.1 6/36
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
ww
www.DataSheet4U.net
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
B170UW01 V1
Note 1: 5 points position (Display Area: 367.20 (H) x 229.50 (V) mm)
W
W /4 W /4 W /4 W /4
H /4
1 2
H /4
H 3
H /4
4 5
H /4
Note 2: 13 points position
W
W /4 W /4 W /4 W /4
10 10
10
1 2 3
H /4
4 5
H /4
H 6 7 8
H /4
9 10
H /4 11 12 13
10
Note 3: The luminance uniformity of 5 and 13 points is defined by dividing the maximum luminance values by the
minimum test point luminance
Maximum Brightness of five points
W5 =
Minimum Brightness of five points
Maximum Brightness of thirteen points
W13 =
Minimum Brightness of thirteen points
document version 1.1 7/36
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
ww
www.DataSheet4U.net
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
B170UW01 V1
Note 4: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change
during measuring. In order to stabilize the luminance, the measurement should be executed after lighting
Backlight for 30 minutes in a stable, windless and dark room.
Photo detector
Field=2
50 cm
LCD Panel TFT-LCD Module
Center of the screen
Note 5 Definition of Average Luminance of White (YL):
Measure the luminance of gray level 63 at 5 points YL = [L (1)+ L (2)+ L (3)+ L (4)+ L (5)] / 5
L (x) is corresponding to the luminance of the point X at Figure in Note (1).
Note 6 Definition of contrast ratio:
Contrast ratio is calculated with the following formula.
Brightness on the "White" state
Contrast ratio (CR) =
Brightness on the "Black" state
document version 1.1 8/36
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
ww
www.DataSheet4U.net
Global LCD Panel Exchange Center www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
B170UW01 V1
Note 7 Definition of Cross Talk (CT)
CT = | YB