Text preview for : Panel_SAMSUNG_LSJ400HL02-E_0_[DS].pdf part of . Various Panel SAMSUNG LSJ400HL02-E 0 [DS] . Various LCD Panels Panel_SAMSUNG_LSJ400HL02-E_0_[DS].pdf
Back to : Panel_SAMSUNG_LSJ400HL02- | Home
Global LCD Panel Exchange Center www.panelook.com
Product Information
Customer : Visual Display Division DATE : 14. Dec. 2011
Any Modification of Specification is not allowed without SDC's Permission.
Samsung Display Co . , LTD.
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 1/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Revision History
Date Rev. No Page Summary
14. Dec. 2011 000 all First issued
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 2/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
General Description
Description
LSJ400HL02 is a color active matrix liquid crystal display (LCD) that uses amorphous
silicon TFT( Thin Film Transistor) as switching components. This model is composed of a
TFT LCD panel, a driver circuit. The resolution of a 40" is 1920 x 1080 and this model can
display up to 16.7 million colors with wide viewing angle of 89 or higher in all directions.
This panel is intended to support applications to provide a excellent performance for Flat
Panel Display such as Home-alone Multimedia TFT-LCD TV and High Definition TV.
Features
High contrast & aperture ratio with wide color gamut
SPVA (Super Patterned Vertical Align) mode
Wide viewing angle ( 178 )
High speed response
FHD resolution (16:9)
2Ch LVDS (Low Voltage Differential Signaling) interface
2D / 3D function compatible
General Information
Items Specification Unit Note
893.5(H) x 506.05(V) 1.0mm
Panel Size mm
1.76(D) Max
Weight 1.8(Max) kg
Pixel Pitch 0.46125(H) X 0.15375(V) mm
Active Display Area 885.6(H) X 498.15(V) mm
Surface Treatment Haze 0%, Hard-coating (2H)
Display Colors 16.7M (8Bits) colors
Number of Pixels 1920 x 1080 pixel
Pixel Arrangement RGB vertical stripe
Display Mode Normally Black
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 3/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable
damage to the device.
(
Item Symbol Min. Max. Unit Note
Power Supply Voltage VDD 10.8 13.2 V (1)
Storage temperature TSTG -20 65 (2)
Glass surface
temperature Center TOPR 0 50 (2)
(Operation)
Note (1) Ta= 25 2 C
(2) Temperature and relative humidity range are shown in the figure below.
a. 90 % RH Max. (Ta 39 C)
b. Relative Humidity is 90% or less. (Ta > 39 C)
c. No condensation
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 4/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2. Optical Characteristics
The optical characteristics should be measured in a dark room or equivalent.
Measuring equipment : TOPCON RD-80S, TOPCON SR-3 ,ELDIM EZ-Contrast
(Ta = 25 2 C, VDD=12V )
Item Symbol Condition Min. Typ. Max. Unit Note
Contrast Ratio (1)
C/R 4,000 5,000 -
(Center of screen) SR-3
Response (3)
G-to-G Tg - 4 12 msec
Time RD-80S
(4)
Transmittance T 4.46 4.8 - %
Normal SR-3
Rx TL,R=0 0.640
Red TU,D=0
Ry 0.330
Gx Viewing 0.300
Green Angle
Color Gy 0.600
TYP. TYP. (5),(6)
Chromaticity
Bx -0.03 0.150 +0.03 SR-3
(CIE 1931)
Blue
By 0.060
Wx 0.280
White
Wy 0.290
sRGB Concordance - - 98.5 - % (5)
Color Temperature - - 10,000 - K SR-3
TL 75 89 -
Hor.
TR 75 89 - (6)
Viewing
C/R10 Degree EZ-
Angle TU 75 89 - Contrast
Ver.
TD 75 89 -
Transmittance
(2)
Uniformity Tuni - - 10 %
SR-3
(9 Points)
Notice
(a) Test Equipment Setup
The measurement should be executed in a stable, windless and dark room between
40min and 60min after operating the Panel at the given temperature for stabilization
of the standard light(SEC use standard illuminant D65 Media).
This should be measured in the center of screen. Environment condition : Ta = 25 2 C
(b) D65 Media means general available light source.
Color Temperature is 6504K , a color coordinate is Wx 0.2948, Wy 0.322,
Luminance is 3389cd/
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 5/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Photo detector
Photo detector Field
SR3 1
RD-80S 2 Field
BM-5A : 50
RD-80S : 50
EZ-Contrast:0
TFT - LCD Module
LCD Panel
The center of the screen
- Definition of test point
320 960 1600
180 Active Area
Test Point
540
900
Note (1) Definition of Contrast Ratio (C/R)
: Ratio of gray max (Gmax) & gray min (Gmin) at the center point of the panel
: The measurement goes in D65 Standard Light Source
G max
C/R
G min
Gmax : Luminance with all pixels white
Gmin : Luminance with all pixels black
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 6/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Note (2) Definition of 9 points Transmittance uniformity (Test pattern : Full White)
The measurement goes in D65 Standard Light Source
(T max T min)
Tuni u 100
T max
Tmax : Maximum Transmittance
Tmin : Minimum Transmittance
Note (3) Definition of Response time : Sum of Tr, Tf
Display data Black (data off) White (data on) Black (data off)
TR TF
Optical Instruments
100%
Response
90%
10%
0%
TIME
G-to-G : Average response time between Gray to Gray (Scale)
Note (4) Definition of Luminance of White : Luminance of white at center point
The measurement goes in D65 Standard Light Source
Note (5) Definition of Color Chromaticity (CIE 1931)
Color coordinate of Red, Green, Blue & White at center point
The measurement goes in D65 Standard Light Source
Note (6) Definition of Viewing Angle
: Viewing angle range (C/R 10)
The measurement goes in D65 Standard Light Source
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 7/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3. Electrical Characteristics
3.1 TFT LCD Module
The connector for display data & timing signal should be connected.
Ta = 25 C 2 C
Item Symbol Min. Typ. Max. Unit Note
Voltage of Power Supply VDD 10.8 12.0 13.2 V (1)
(a) Black - 1400 1700 mA
Current
of Power (b) White IDD - 1400 1700 mA (2),(3)
Supply
(c) N-pattern - 2000 3000 mA
Vsync Frequency fV - - - Hz
Hsync Frequency fH - - - kHz
Main Frequency Fdclk - - - MHz
Rush Current IRUSH - - - A (4)
Note (1) The ripple voltage should be controlled under 10% of VDD.
(2) fV= 240 Hz, fDCLK = 594 MHz, VDD = 12.0V, DC Current.
(3) Power dissipation check pattern (LCD Module only)
a) Black Pattern b) White Pattern c)
(4) Measurement Conditions
VDD
100%
90%
10%
GND
TRUSH=470
Rush Current IRUSH can be measured when TRUSH. is 470 .
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 8/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
5.1 LVDS Interface
- LVDS Receiver : FRC
LVDS pin JEIDA -DATA
TxIN/RxOUT0 R4
TxIN/RxOUT1 R5
TxIN/RxOUT2 R6
TxOUT/RxIN0 TxIN/RxOUT3 R7
TxIN/RxOUT4 R8
TxIN/RxOUT5 R9
TxIN/RxOUT6 G4
TxIN/RxOUT7 G5
TxIN/RxOUT8 G6
TxIN/RxOUT9 G7
TxOUT/RxIN1 TxIN/RxOUT10 G8
TxIN/RxOUT11 G9
TxIN/RxOUT12 B4
TxIN/RxOUT13 B5
TxIN/RxOUT14 B6
TxIN/RxOUT15 B7
TxIN/RxOUT16 B8
TxOUT/RxIN2 TxIN/RxOUT17 B9
TxIN/RxOUT18 HSYNC
TxIN/RxOUT19 VSYNC
TxIN/RxOUT20 DEN
TxIN/RxOUT21 R8
TxIN/RxOUT22 R9
TxIN/RxOUT23 G8
TxOUT/RxIN3 TxIN/RxOUT24 G9
TxIN/RxOUT25 B8
TxIN/RxOUT26 B9
TxIN/RxOUT27 RESERVED
TxIN/RxOUT28
TxIN/RxOUT29
TxIN/RxOUT30
TxOUT/RxIN4 TxIN/RxOUT31
TxIN/RxOUT32
TxIN/RxOUT33
TxIN/RxOUT34 RESERVED
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 9/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
5.2 Input Signals, Basic Display Colors and Gray Scale of Each Color
DATA SIGNAL
GRAY
DISPLAY
COLOR RED GREEN BLUE SCALE
(8bit)
LEVEL
R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 B0 B1 B2 B3 B4 B5 B6 B7 B8 B9
BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -
BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 -
GREEN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 -
CYAN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -
BASIC
COLOR
RED 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -
MAGENTA 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 -
YELLOW 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 -
WHITE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 -
BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R0
1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1
DARK 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R2
GRAY
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
SCALE R3~
OF R1020
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
RED
LIGHT 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1021
0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1022
RED 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 R1023
BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G0
0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G1
DARK 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 G2
GRAY
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
SCALE G3~
OF G1020
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
GREEN
LIGHT 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1021
0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1022
GREEN 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 G1023
BLACK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 B1
DARK 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 B2
GRAY
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
SCALE B3~
OF B1020
: : : : : : : : : : : : : : : : : : : : : : : : : : : : : :
BLUE
LIGHT 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 1 1 B1021
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 B1022
BLUE 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 B1023
Note) Definition of Gray :
Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level)
Input Signal : 0 = Low level voltage, 1 = High level voltage
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 10/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
6.3 Timing diagrams of interface signal ( DE only mode )
TV
TVD
DE
TH
THD
DE
DCLK
TC
DATA
SIGNALS
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 11/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
6.4 Power ON/OFF Sequence
To prevent a latch-up or DC operation of the LCD Module, the power on/off
sequence should be as the diagram below.
0.5ms 1ms 0ms 1000msT4
1000msT5
100msT6
T1 : VDD rising time from 10% to 90%
T2 : The time from VDD to valid data at power ON.
T3 : The time from valid data off to VDD off at power Off.
T4 : VDD off time for Windows restart
T5 : The time from valid data to B/L enable at power ON.
T6 : The time from valid data off to B/L disable at power Off.
The supply voltage of the external system for the Module input should be the same
as the definition of VDD.
Apply the lamp voltage within the LCD operation range. When the back light turns on
before the LCD operation or the LCD turns off before the back light turns off,
the display may momentarily show abnormal screen.
In case of VDD = off level,
please keep the level of input signals low or keep a high impedance.
T4 should be measured after the Module has been fully discharged between power off
and on period.
Interface signal should not be kept at high impedance when the power is on.
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 12/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
7. Outline Dimension
BM Tolerance Spec.
- Real BM Width spec. : 0.1mm
- Gap between Active Center and BM
up/down/right/left : 0.1mm (a,a')
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 13/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
9. PACKING
9.1 CARTON (Internal Package)
(1) Packing Form Corrugated fiberboard box and corrugated cardboard as shock absorber
(2) Packing Method
Packing- Upper Box
Pallet Tray 15EA
10EA
10EA 10EA
Pallet-Plastic
9.2 Packing Specification
ITEM Specification Remark
1. 1.90 Kg / LCD (15[ea]/Tray, 300[ea]/Pallet)
2. 0.05 Kg / Middle sheet (18[ea]/Tray, 360[ea]/Pallet)
LCD Packing 300ea / Box
3. 1.40 Kg / Panel tray (20ea/Pallet)
4. 1.00 Kg / Packing Box (1ea)
1. Pallet weight = 27 kg
Pallet-Wood 1Box / Pallet
2. 27 Kg / Pallet
Pallet size H x V x height 1,485mm(H) x 1,150mm(V) x 1,192mm(height)
Pallet(27kg) + Panel tray(28kg) + Panel(570g)
Pallet weight 648.0 kg
+ Middle sheet(18Kg) + Packing Box (5kg)
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 14/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
9.3 Middle Sheet Specification
ITEM Specification
Temperature 25
Measurement Condition
Humidity 20% ~ 60%
Material Polyethylene
Surface Resistance 106 ~ 109.9
Static
Less than 200V
(No Friction)
Frictional Voltage
Dynamic
Less than 500V
(Friction : 5times at once)
9.4 Middle Sheet Outline Dimension
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 15/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
10. MARKING & OTHERS
A nameplate bearing followed by is affixed to a shipped product at the specified
location on each product.
(1) Cell Label
LSJ400HL02
Lot number : X X X X XXX XX X
Cell Position No. (In the Glass)
Glass No. (In the one Lot)
Lot No. (Glass)
Month
Year (Note1)
Product code
Line
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 16/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
(2) Box Label
LSJ400HL02
xxxx
300
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 17/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
11. General Precautions
11.1 Handling
(a) When the Module is assembled, it should be attached to the system firmly
using all mounting holes. Be careful not to twist and bend the Module.
(b) Refrain from strong mechanical shock and / or any force to the Module.
In addition to damage, this may cause improper operation or damage to the Module
and CCFL back light.
(c) Note that polarizers are very fragile and could be damage easily.
Do not press or scratch the surface harder than a HB pencil lead.
(d) Wipe off water droplets or oil immediately. If you leave the droplets for a long
time, staining or discoloration may occur.
(e) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth.
(f) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane.
Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid
or Methyl chloride. It might permanent damage to the polarizer due to chemical
reaction.
(g) If the liquid crystal material leaks from the panel, it should be kept away
from the eyes or mouth . In case of contact with hands, legs or clothes, it must
be washed away with soap thoroughly.
(h) Protect the module from Electrostatic discharge. Otherwise the ASIC IC or
Semiconductor would be damaged.
(i) Use finger-stalls with soft gloves in order to keep display clean during the
incoming inspection and assembly process.
(k) Protection film for polarizer on the Module should be slowly peeled off just before use
so that the electrostatic charge can be minimized. Must put on antistatic glove while
handle a module
(l) Pins of I/F connector should not be touched directly with bare hands.
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 18/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
* Process Control Standard
Item Management standard value and performance standard
1 Anti-static mat (shelf) 1 to 50 [Mohm]
Anti-static mat (floor,
2 1 to 100 [Mohm]
desk)
3 Ionizer Attenuate from 1,000V to 100V within 2 sec
4 Anti-static wrist band 0.8 to 10 [Mohm]
Anti-static wrist band
5 entry and ground Below 1,000 [ohm]
resistance
6 Temperature 0 35
7 Humidity 60 to 70 [%RH]
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 19/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
11.2 Storage
We highly recommend to comply with the criteria in the table below
ITEM Unit Min. Max.
Storage
( ) 5 40
Temperature
Storage
(%rH) 35 75
Humidity
Storage life 6 months
- The storage room should provide good ventilation and temperature control.
- Products should not be placed on the floor, but on the Pallet away from
a wall.
- Prevent products from direct sunlight, moisture nor water; Be cautious of
Storage a build up of condensation.
- Avoid other hazardous environment while storing goods.
Condition
After 1 month 2 month 3 month 4month 5 month 6month
Baking No backing 50 50
11.3 Operation
(a) Do not connect or disconnect the Module in the "Power On" condition.
(b) Power supply should always be turned on/off by the "Power on/off sequence"
(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference should be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.
(d) The cable between the back light connector and its inverter power supply should
be connected directly with a minimized length. A longer cable between
the back light and the inverter may cause lower luminance of lamp(CCFT) and
may require higher startup voltage(Vs).
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 20/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
11.4 Operation Condition Guide
(a) The LCD product should be operated under normal conditions.
Normal condition is defined as below;
- Temperature : 20 15
- Humidity : 55 20%
- Display pattern : continually changing pattern (Not stationary)
(b) If the product will be used in extreme conditions such as high temperature,
humidity, display patterns or operation time etc.., It is strongly recommended
to contact SEC for Application engineering advice. Otherwise, its reliability and
function may not be guaranteed. Extreme conditions are commonly found at
Airports, Transit Stations, Banks, Stock market, and Controlling systems.
11.5 Others
(a) Ultra-violet ray filter is necessary for outdoor operation.
(b) Avoid condensation of water. It may result in improper operation or disconnection
of electrode.
(c) Do not exceed the absolute maximum rating value. ( supply voltage variation,
input voltage variation, variation in part contents and environmental temperature,
and so on)
Otherwise the Module may be damaged.
(d) If the Module keeps displaying the same pattern for a long period of time,
the image may be "sticked" to the screen.
To avoid image sticking, it is recommended to use a screen saver.
(e) This Module has its circuitry PCB's on the rear side and should be handled
carefully in order not to be stressed.
(f) Please contact SEC in advance when you display the same pattern for a long time.
MODEL LSJ400HL02 Doc. No 07-001-S-111214 Page 21/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com