Text preview for : 8030WF_ERROR_DISPLAY.pdf part of LG WD8030 wd8030 service manual
Back to : wd8030.rar | Home
7-4.ERROR DISPLAY.
If you press the Start/Pause button in error condition, any error except `SENSOR PRESSURE S/W ERROR' will disappear and the machine will change into pause status. In case of SENSOR PRESSURE S/W ERROR, THERMISTOR ERROR if the error is not resolved within 20 sec., and in case of other errors, if the error is not resolved within 4 min., power will be turned off automatically and the error only will be blinked. But in case of OVER FLOW ERROR , power will not be turned off. ERROR
1 WATER INLET ERROR
SYMPTOM
Pre Main Rinse Hold Super Normal
Non distributable things are put into the drum. Water has not reached to the pre-set level within 4 min. since inlet valve operated or water has not reached to the normal level within 25 min. The appliance is tilted. Laundry is gatherd to one side.
2
IMBALANCE ERROR
800
3 DRAIN ERROR
(1000) (800)
Water has not drained enough within 5 min.
600
no Spin (600)
4 OVER FLOW ERROR 5 SENSOR PRESSURE S/W ERROR
Coloreds Whites Rapid Synthetic Wool Delicate
Water is automatically being pumped out because too much water is in the tub.
The sensor pressure switch is out of order.
6
DOOR OPEN ERROR
The Start/Pause button is pressed with the door open.
Door Lock
The door switch is out of order. 7 THERMISTOR ERROR
95 C 60 C 40 C Cold
The thermistor is out of order.
15