Text preview for : 03_disassembly_and_reassemble.pdf part of Samsung 03 disassembly and reassemble Samsung LED TV UE40 46 55 D7000LSX chassis U55A SAMSUNG U55A CHASSIS UE40-46-55-D7000LSX LED TV SM 03_disassembly_and_reassemble.pdf



Back to : 03_disassembly_and_reasse | Home

3. Disassembly and Reassemble

3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
WARNING: This LED TV contains electrostatically sensitive devices. Use caution when handling these components.

3-1. Disassembly and Reassembly
Cautions: 1. Disconnect the LED TV from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.

Description Picture Description Screws

1 Place TV face down on cushioned table.
Remove screws from the Stand.
Remove stand.




6001-002621
(M4, L8, Tapping)




2 Remove the screws of rear-cover.




6001-002621
(M4, L8, Tapping)




3-1
3. Disassembly and Reassemble


Description Picture Description Screws

3 Lift up and remove the rear-cover.

* Caution : Becareful when you lift up the
rear-cover, It's really sharp.




4 Remove the screws of middle-cover.




6001-002621
(M4, L8, Tapping)




5 Lift up and remove the middle-cover.




* Caution: Remove the function cable
before removing the middle
cover.




- Rear view of 46" / 55"




3-2
3. Disassembly and Reassemble


Description Picture Description Screws

6 Remove the Speakers(R/L).




7 Remove the Wi-Fi Module.




6001-002653
(M3,L6,Machine)




8 Remove the screws of Main Board.




6001-002653
(M3,L6,Machine)




* Caution : Disconnect all cable
connectors before removing
any board.




3-3
3. Disassembly and Reassemble


Description Picture Description Screws

9 Remove the screws of IP board.
- Remove the IP board.




6001-002653
(M3,L6,Machine)




10 Remove the T-CON Bracket.




6001-002653
(M3,L6,Machine)




- Panel 46", 55"




Reassembly procedures are in the reverse order of disassembly procedures.




3-4
3. Disassembly and Reassemble

Assembly of Touch Function

Description Picture Description Screws

1 Remove the cover sheet from Assy
p-cover function(1~3) 1




2




3




2 Firmly put ASSY P-Cover Function to
the designated GUIDE RIBS.




ASSY P-COVER FUNCTION




3-5
3. Disassembly and Reassemble


Description Picture Description Screws

1




2




3 Assy P-Cover Function Hook into
square hole in the Middle.




4 Rubing the ASSY P-COVER
Function until double face tape.




3-6