Text preview for : E4980A Precision LCR Meter Firmware Revision History FirmwareRevisionHistory_E4980A [2].pdf part of Agilent E4980A Precision LCR Meter Firmware Revision History FirmwareRevisionHistory E4980A [2] Agilent E4980A Precision LCR Meter Firmware Revision History FirmwareRevisionHistory_E4980A [2].pdf
Back to : E4980A Precision LCR Mete | Home
E4980A Precision LCR Meter, Firmware Revision History
Note:
The purpose of this document is to provide an overview of important changes that could affect a majority of
customers. If you have any concerns about a specific issue, contact your local Agilent representative.
Revision 3.00 ... Released Jun. 2013
1. Added new options (Opt.030/050/100/200)
2. Fixed bug on entering "-" manually
Revision 2.21 ... Released Aug. 2011
1. Fixed bug on LAN Socket.
Revision 2.21 ... Released Aug. 2011
1. Fixed bug on LAN Socket.
Revision 2.20 ... Released Jul. 2009
1. Fixed bug on I/O error through device side USB control.
Note: For MY46204137 and above, the firmware revision 2.20 and later can only
be installed. Do NOT attempt to install the older firmware revisions.
Revision 2.13 ... Released Nov. 2007
1. Fixed bug on signal output during Step Delay time in L-Rdc measurement mode
(Opt 001).
Revision 2.12 ... Released Aug. 2007
1. Corrected DC Bias current setting resolution on Option 002 (40 A configuration).
2. Fixed bug on INDEX/EOM output at Open/Short/Load correction.
3. Fixed bug with INDEX/EOM output on Scanner Interface (Opt. 301).
Revision 2.10 ... Released Apr. 2007
1. Added function for selecting DC Bias Range (Auto On/Off).
2. Fixed open correction issue.
Revision 2.00 ... Released Nov. 2006
1. Added functions for LXI class C.
2. Fixed DNS server issue.
3. Fixed DHCP server issue.
Revision 1.05 ... Released Aug. 2006
1. Fixed OPE/SHORT correction issue.
Revision 1.04 ... Released Jul. 2006
1. Fixed LIST:STM:TYPE command issue.
2. Fixed recall function issue.
Revision 1.03 ... Released Jun. 2006
1. Added avoidance routine for "boot fail".
Revision 1.02 ... Released Jun. 2006
1. Changed DC bias list sweep sequence.
2. Changed OPC? Command specification.
Revision 1.01 ... Released Apr. 2006
1. Changed Handle I/F output specification when "Fixture cover open" message is
displayed.
Revision 1.00 ... Released Mar. 2006
1. Initial Release.