Text preview for : Keysight_i3070_08_5F40pc_Release_Notes Keysight i3070 08.40pc Software Patch Release Notes c20141029 part of Agilent Keysight i3070 08 5F40pc Release Notes Keysight i3070 08.40pc Software Patch Release Notes c20141029 Agilent Keysight_i3070_08_5F40pc_Release_Notes Keysight i3070 08.40pc Software Patch Release Notes c20141029 [2].pdf



Back to : Keysight_i3070_08_5F40pc_ | Home

Keysight i3070 08.40pc Software Patch
Software Release Date: Oct, 2014
System Requirements: Keysight i3070 test system or test development workstation
Controller Requirements: Windows PC
Operating System: Microsoft Windows 7 or Microsoft Windows XP
Software Requirement: Keysight i3070 08.40p


This software patch should only be installed on systems with i3070 08.40p software release. It can be
installed on i3070 test system or i3070 test development.


The 08.40pc software patch addresses following change requests included 08.40sa.

Change Request Description

195946 08.21p:
Fixed Utility card plugin modules wiring reversed.

199774 08.40p:
Ability to output system temperature to a file.

210063 08.40p:
Inline - Operator Widget should remove Faon / Faoff buttons

218788 Illegal XML characters in the board file cause Coverage Analyst to abort with non-
descriptive error message

221346 08.40p:
Ability to display program name and version in i3070 interface.

08.40p:
223646
Probe Select crashes with "2788 segmentation violation" message.

08.30p:
237576 "Internal Error -11" or "In filter caught AV as expected" message appears if
"enter...using.." statement is heavily used in large and complex testplan.

242922 08.30p:
Subsequent High Voltage Zener tests on the same board using same module resources
fail when executed sequentially.

242923 08.30p:
Subsequent High Voltage Zener tests from different boards of the panel fail Source Over
Voltage if using the same module.

278346 08.40p :
Fixed DGN T2340 not displaying the results

315320 08.40p:
Inline - The default keepout area between the edge of the board and the front edge of
the fixture incorrect when placing panelized board in fixture consultant.

352246 08.40p:
Fixed incorrect board placement with i3070 Inline
The software patch must be installed using the administrator login (or a login with administrator privileges).

Installing the 08.40pc software patch

Follow these steps to install the 08.40pc software patch:

1. Save the Keysighti3070_0840pc.exe file to your hard disk.
2. Close all open programs.

3. Double-click Keysighti3070_0840pc.exe

4. Follow the on-screen instructions for installation.

5. To validate that the software was installed correctly:

a. On the Start menu, select Programs > Agilent ICT > Korn Shell

b. In the Korn Shell window, type version and press Enter.
The following software revision should be displayed:
Agilent Medalist i3070 08.40pc 1113 WN.