Text preview for : N5224-90001 Data Sheet and Technical Specifications_252C N5224A and N5225A 2-Port and 4-Port PNA Net part of Agilent N5224-90001 Data Sheet and Technical Specifications 252C N5224A and N5225A 2-Port and 4-Port PNA Net Agilent N5224-90001 Data Sheet and Technical Specifications_252C N5224A and N5225A 2-Port and 4-Port PNA Network Analyzers [53].pdf



Back to : N5224-90001 Data Sheet an | Home

Keysight 2-Port and
4-Port PNA Network
Analyzer
N5224A 10 MHz to 43.5 GHz
N5225A 10 MHz to 50 GHz




Data Sheet and
Technical
Specifications
Documentation Warranty
THE MATERIAL CONTAINED IN THIS DOCUMENT IS PROVIDED "AS IS," AND IS SUBJECT TO BEING
CHANGED, WITHOUT NOTICE, IN FUTURE EDITIONS. FURTHER, TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, KEYSIGHT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED WITH REGARD TO
THIS MANUAL AND ANY INFORMATION CONTAINED HEREIN, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. KEYSIGHT SHALL NOT BE
LIABLE FOR ERRORS OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE
FURNISHING, USE, OR PERFORMANCE OF THIS DOCUMENT OR ANY INFORMATION CONTAINED HEREIN.
SHOULD KEYSIGHT AND THE USER HAVE A SEPARATE WRITTEN AGREEMENT WITH WARRANTY TERMS
COVERING THE MATERIAL IN THIS DOCUMENT THAT CONFLICT WITH THESE TERMS, THE WARRANTY
TERMS IN THE SEPARATE AGREEMENT WILL CONTROL.



DFARS/Restricted Rights Notice
If software is for use in the performance of a U.S. Government prime contract or subcontract, Software is
delivered and licensed as "Commercial computer software" as defined in DFAR 252.227-7014 (June 1995), or as a
"commercial item" as defined in FAR 2.101(a) or as "Restricted computer software" as defined in FAR 52.227-19
(June 1987) or any equivalent agency regulation or contract clause. Use, duplication or disclosure of Software is
subject to Keysight Technologies' standard commercial license terms, and non-DOD Departments and Agencies
of the U.S. Government will receive no greater than Restricted Rights as defined in FAR 52.227-19(c)(1-2) (June
1987). U.S. Government users will receive no greater than Limited Rights as defined in FAR 52.227-14 (June 1987)
or DFAR 252.227-7015 (b)(2) (November 1995), as applicable in any technical data.




2
Documentation Warranty ............................................................................... 2

DFARS/Restricted Rights Notice .................................................................. 2
Definitions ......................................................................................................... 6

Corrected System Performance ....................................................................... 7
System Dynamic Range and Receiver Dynamic Range ................................ 7
Table 1a. System Dynamic Range and Receiver Dynamic Range,
N5224A, Option 200, 400 ............................................................................... 8
Table 1b. System Dynamic Range and Receiver Dynamic Range,
N5225A, Option 200, 400 ............................................................................... 9
Table 2. System Dynamic Range at Test Port (dB) ......................................10
Table 3. Extended Dynamic Range at Direct Receiver Access Input (dB) .11
N5224A and N5225A Corrected System Performance, All Options ..........12
Table 4a. N5224A and N5225A with 85056A Calibration Kit .....................12
Table 4b. N5224A and N5225A with
N4693A 2-Port Electronic Calibration Module ............................................14

Uncorrected System Performance .................................................................16
Table 5a. Error Terms (dB), All Ports, All Options - Specifications ............16
Table 5b. Error Terms (dB), All Ports, All Options - Typical ........................17

Test Port Output ..............................................................................................18
Table 6. Frequency Information, All Options................................................18
Table 7a. Maximum Leveled Power (dBm), All Ports - Specification .........18
Table 7b. Maximum Leveled Power (dBm), All Ports - Typical ...................19
Table 8. Power Level Accuracy (dB), All Options .........................................19
Table 9a. Power Level Linearity (dB), All Options - Specification ..............20
Table 9b. Power Level Linearity (dB), All Options - Specification ..............20
Table 10a. Power Sweep Range (dB), All Ports - Specification .................20
Table 10b. N5224 and N5225A Power Sweep Range (dB), All Ports ........21
Table 11. Nominal (Preset) Power (dBm) .....................................................21
Table 12. Power Resolution and Maximum/Minimum Settable Power,
All Models and Options ..................................................................................21
Table 13. 2nd and 3rd Harmonics at Max Specified Power (dBc)
All Options.......................................................................................................22
Table 14. Non-Harmonic Spurs at Nominal Power (dBc),
All Models and Options - Typical ..................................................................22


3
Table 15. Phase Noise (dBc/Hz), All Options - Typical ...............................23

Test Port Input .................................................................................................23
Table 16. Test Port Noise Floor (dBm) @ 10 Hz IFBW, All Options ..........23
Table 17. Direct Receiver Access Input Noise Floor (dBm),
Option 201, 217, 219, 401, 417, 419 ...........................................................24
Table 18a. 0.1 dB Receiver Compression at Test Port (dBm),
Option 201, 217, 219, 401, 417, 419 - Typical ...........................................24
Table 18b. Receiver Compression at Test Power - Specification ..............25
Table 19. Trace Noise Magnitude (dB rms)..................................................25
Table 20. Trace Noise Phase (deg rms) ........................................................26
Table 21. Reference Level Magnitude, All Models and Options .................26
Table 22. Stability, All Options - Typical.......................................................27
Table 23. Damage Input Level, All ports ......................................................27

Dynamic Accuracy ...........................................................................................27
Table 24. N5224A and N5225A Dynamic Accuracy ....................................28
Table 25. Group Delay - Typical ....................................................................31

General Information.........................................................................................32
Table 26. Miscellaneous Information............................................................32
Table 27. Front Panel Information, All Options ............................................32
Table 28. Rear Panel Information, All Options .............................................33
Table 29. Analyzer Dimensions and Weight .................................................37
Regulatory and Environmental Information .................................................37

Measurement Throughput Summary .............................................................38
Table 30a. Typical Cycle Time (ms) for Measurement Completion,
All Models and Options ..................................................................................38
Table 30b. N5224A Typical Cycle Time (ms) for
Full-Span Measurement Completion ...........................................................39
Table 30c. N5225A Typical Cycle Time (ms) for
Full-Span Measurement Completion ...........................................................39
Table 31. Cycle Time vs. IF Bandwidth - Typical .........................................40
Table 32. Cycle Time vs. Number of Points - Typical ..................................41
Table 33. Data Transfer Time (ms) - Typical ................................................42

Specifications: Front-Panel Jumpers.............................................................43
Table 34. Measurement Receiver Inputs (dBm) - Typical...........................43

4
Table 35. Reference Receiver Inputs and
Reference Source Outputs (dBm) - Typical .................................................44
Table 36. Reference Receiver Inputs and
Reference Receiver Outputs (dBm) - Typical ..............................................45
Table 37. Source Outputs (dBm) - Typical ...................................................46
Table 38. Coupler Inputs (dB) - Typical ........................................................47
Table 39. Damage Level - Typical .................................................................47

Test Set Block Diagrams .................................................................................48
N5224A and N5225A Option 200 (2-port base model) .............................48
N5224A and N5225A Option 201 .................................................................48
N5224A and N5225A Option 217 .................................................................49
N5224A and N5225A Option 219 .................................................................49
N5224A and N5225A Option 400 (4-port base model) .............................50
N5224A and N5225A Option 401 .................................................................50
N5224A and N5225A Option 417 .................................................................51
N5224A and N5225A Option 419 .................................................................51
Receiver Block Diagram ................................................................................52




5
This is a complete list of the technical specifications for the N5224A and N5225A PNA network
analyzers with the following options. See block diagrams on page 46 for all models and options.
2-Port Models
Option 200 - 2-port base model with standard test set.
Option 201 - To base model, adds front-panel jumpers and R1 receiver switch.
Option 217 - To base model, adds front-panel jumpers, R1 receiver switch, and source and receiver
attenuators (extended power range).
Option 219 - To base model, adds front-panel jumpers, R1 receiver switch, source and receiver
attenuators (extended power range), and bias-tees.
4-Port Models
Option 400 - 4-port base model with standard test set.
Option 401 - To base model, adds front-panel jumpers and R1 receiver switch.
Option 417 - To base model, adds front-panel jumpers, R1 receiver switch, and source and receiver
attenuators (extended power range).
Option 419 - To base model, adds front-panel jumpers, R1 receiver switch, source and receiver
attenuators (extended power range), and bias-tees.

Notes
This document provides technical specifications for the 85056A and N4693A calibration kits.
Please download our free Uncertainty Calculator from http://www.keysight.com/find/na_calculator to generate
the curves for your calibration kit and PNA setup.
For all tables in this data sheet, the specified performance at the exact frequency of a break is the degraded
value of the two specifications at that frequency.


Definitions
All specifications and characteristics apply over a 25