MIPI UniPro (M-PHY) Protocol Triggering and Decode for Infiniium Series Oscilloscopes 5991-1595EN c2 part of Agilent MIPI UniPro (M-PHY) Protocol Triggering and Decode for Infiniium Series Oscilloscopes 5991-1595EN c2 MIPI UniPro (M-PHY) Protocol Triggering and Decode for Infiniium Series Oscilloscopes 5991-1595EN c2, Agilent MIPI UniPro (M-PHY) Protocol Triggering and Decode for Infiniium Series Oscilloscopes 5991-1595EN c20140528 [8].pdf text manual preview

Text preview for : MIPI UniPro (M-PHY) Protocol Triggering and Decode for Infiniium Series Oscilloscopes 5991-1595EN c2 part of Agilent MIPI UniPro (M-PHY) Protocol Triggering and Decode for Infiniium Series Oscilloscopes 5991-1595EN c2 Agilent MIPI UniPro (M-PHY) Protocol Triggering and Decode for Infiniium Series Oscilloscopes 5991-1595EN c20140528 [8].pdf

Back to : MIPI UniPro (M-PHY) Proto | Home

MIPI UniPro (M-PHY)
Protocol Triggering and Decode
for Infiniium Series Oscilloscopes
Data Sheet
MIPI UniPro (M-PHY)

MIPI (Mobile Industry Processor Interface) serial buses are the backbone for communication in mobile products. The serial
bus interface provides content-rich points for debug and test. However, since these protocols transfer bits serially, using
a traditional oscilloscope has limitations. Manually converting captured 1's and 0's to protocol requires significant effort,
can't be done in real-time, and includes potential for human error. Also, traditional scope triggers are not sufficient for
specifying protocol-level conditions.

Extend your scope capability with Agilent's MIPI UniPro The following are the MIPI UniPro protocols and
(M-PHY) triggering and decode application. This application features that will be supported by the application:
makes it easy to debug and test designs that include MIPI
UniPro buses using your Infiniium Series oscilloscope. 1. Support MIPI UniPro v1.41 and v1.60 decode and
triggering