Text preview for : SY31-0458-3_Section_09_5211_Printer.pdf part of IBM SY31-0458-3 Section 09 5211 Printer IBM system34 fe SY31-0458-3_System_34_5340_System_Unit_Theory_Diagrams_Manual_Jul79 SY31-0458-3_Section_09_5211_Printer.pdf
Back to : SY31-0458-3_Section_09_52 | Home
Contents
5211 PRINTER AlTACHMENT . 9-1
INTRODUCTION 9-1
Circuit Locations 9-1
Printer Interface. 9-1
DATA FLOW . . . 9-2
FUNCTIONAL UNITS 9-3
OPERATIONS. . . . 9-13
Printer Commands . . 9-13
Example of Print Operations 9-14
Printing Operations 9-15
Spacing Operations 9-15
COMMANDS ~ . . . 9-16
I/O Load Command . 9-16
I/O Control" Load Command 9-18
I/O Sense Command-I/O Control Sense
Command . . . . . . . . . . . -. . . 9-20
Sense Interrupt Level Status Byte Command 9-22
Jump on I/O Command 9-24
ERROR CONDITIONS . 9-26
INPUT/OUTPUT LINES 9-28
Hammer Interface Lines 9-28
Control Interface Lines . 9-30
Operator Panel Interface Lines 9-31
Contents for 5211 Printer Attachment
5211 Printer Attachment
INTRODUCTION
Printer Interface
The 5211 printer attachment attaches the IBM
5211 Printer, either Model 1 or Model 2, to The 5211 Printer attaches directly to the
System/34. With the 48-character print belt, adapter card through a cable that contains three
the Model 1 printer can operate at 160 lines per groups of interface lines. (See Input/Output
minute and the Model 2 printer can operate at Lines later in this section for a description of
300 Iinet..Iper minute. these lines.) The three groups of interface lines
DD
and their functions are:
Circuit Locations