Text preview for : 3703-TE.pdf part of MAKITA 3703-TE MAKITA 3703-TE.pdf
Back to : 3703-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 3703
New Tool
Description 6 mm (1/ 4") Trimmer
CONCEPTION AND MAIN APPLICATIONS
Cutting depth can be adjusted smoothly and precisely with a rack and pinion type of fine depth adjustment.Model
3704 with an angle-adjustable base can perform chamfering with a straight bit. (Note: Model 3703 has a
conventional base.)
< Model 3703 > < Model 3704 >
310mm(12-1/4")
248mm(9-3/4")
117mm(4-5/8") 103mm
109mm(4-1/4") (4-1/16")
90mm(3-1/2")
Specifications
Continuous Rating (W)
Voltage (V) Current (A) Cycle (Hz) Input Output Max. Output(W)
100 3.8 50-60 350 230 310
115 3.3 50-60 350 230 310
200 1.9 50-60 350 230 310
220 1.7 50-60 350 230 310
230 1.7 50-60 350 230 310
240 1.6 50-60 350 230 310
No Load Speed 30,000 R/min.
Net Weight 1.5 kg (3.3 lbs)
Collet Chuck Capacity 6 mm or 1/4"
Base Slide Range 0 - 40 mm (0 - 1-9/16")
Standard Equipment
Straight guide, Wrench 10, 17, Templet guide 10, Straight bit 6, Trimmer guide (for Model 3704 only)
Optional Accessories
Various kinds of trimmer bits with 6 mm or 1/4" shank, Sash router base, Trimmer base assembly, Trimmer shoe
Features and benefits
For Models 3703/3704
1. Rack and pinion type of fine depth adjustment for adjusting the cutting depth smoothly and precisely.
2. Can turn the power supply cord toward your desirable direction for more comfortable operations because these
trimmers have the power supply cord on the top.
3. Easy-to-gripped body design.
4. Transparent resin base for clear view of trimming area.
5. Double insulated for operator safety.
For Model 3704 only
6. Angle-adjustable base (0 - 45 ) allows you to perform any angle of chamfering with a straignt bit.
7. Trimmer shoe with large knob for easy and steady operations.
8. No chip scattering and smooth chip flow because of excellent design of trimmer shoe.
The standard equipment for the tools shown may differ form country to country
Repair
i) To assemble the armature on the motor housing, be sure to place the wave washer 23 on the bottom of the
bearing box.
ii) Use care that the lead wire may not cause pitching when mounting the rear cover.