Text preview for : SETUP.TXT part of AEA PK232MBX Besturing software voor pk232



Back to : Pcpakratt55a org.zip | Home

Howdy!

Here's the stuff to run your PK-232. The program is called "PcPakRat".
This version was written in 1993. It is what I always (ALWAYS!) use
for Navy MARS. Once you get used to it, you will not need anything
else to run your PK-232 in any of its modes...and the PK-232 has quite
a few that some multi-mode data controllers don't have.

1. Make a folder on your hard disk called "MARS" or whatever you like.
2. UNZIP or Copy the entire floppy to that folder on your hard disk.
3. Make a shortcut to the program and call that shortcut "MARS".
4. Use the "MARS" shortcut to start the program.
5. Enter the information per your system and requirements. I
recommend that you set the program up to run your PK-232 at
9600 BPS.
6. Once you have the program running, print out the MARSDUMP.TXT
file.
7. When the program is running, use the ALT-S key to get into the
parameters setups.
8. EXCEPT for substituting YOUR callsign, your SELCAL, your "AAB"
for all of MY callsign stuff, put the values from the
MARSDUMP.TXT into the parameters.
9. SAVE the PK-232 parameters.
10. ENJOY!

73,
Norm