Text preview for : HP1030-TE.pdf part of MAKITA HP1030-TE MAKITA HP1030-TE.pdf
Back to : HP1030-TE.pdf | Home
T ECHNICAL INFORMATION New Tool
For Models HP1030
Description MAKITA 10 mm Hammer drill
CONCEPTION AND MAIN APPLICATIONS
The domestic sales will be started for HP1030 model which has been
handled only for export purpose. Regardless of the similar model as
the MHP1020, this model will be sold for professional application
instead of sales as the M-series.
With the addition of the normal/reverse switch, the function has been
180
further enriched.
67
270
Specifications
Continuous Rating
Voltage (V) Current(A) Cycle(Hz) Input(W) Max. output(W)
Output(W)
100 4.5 50/60 430 200 300
Rotation (R.P.M.) 0-2700/min
Punching frequency 0-29700/min
Steel 10 mm
Wood 18 mm
Concrete 10 mm
Net weight 1.6 kg
Power supply cord 2.5 m
Standard equipment
Chuck key : S10
Optional accesories
Stopper pole assembly
Carbide drill
Grindstone with shaft : 50-80
Dropping pipet 54
Hex. Nut 3/8-24UNF *Note (1)
Features and benifits
Only through switching the knob, it can be used not only as the drill, but also as the vibration drill for concrete.
The great power can be generated regardless of the compact body.
The non-step variable speed switch enables to select the best rotation for the application.
It also can be used as the screw driver with the addition of the normal/reverse switch.
*Note (1) This Nut is used for mounting each attachment of carpenter set.
Cautions in handling
Make sure if the normal/reverse switch is set at the normal when this device is used as the vibration drill.
Do not switch to the normal/reverse suddenly to avoid damaging the motor.
Cautions in disassembling
The screw is mounted inside the hole of drill chuck to prevent the chuck from loosening. Loosen this screw at first when
removing the drill chuck.
The screw is left-handed.
Since the "Cautions in handling" and "Cautions in assembling/disassembling" and "Capacity" other than shown above are
the same as the ones for MH1020, they are omitted.