Text preview for : HM1300-TE.pdf part of MAKITA HM1300-TE MAKITA HM1300-TE.pdf
Back to : HM1300-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. HM1300
New Tool
Description Makita Demolition hammer
CONCEPTION AND MAIN APPLICATIONS 7 224
This hammer is exclusively designed for exporting to respond 68
overseas demand. It's forcused to modify the existing model
HM1301 to have double insulated structure.
114
Specifications
Consumed Rated Max. output(W)
Voltage(V) Current(A) Cycle (Hz)
power(W) output(W)
100 13.0 50/60 1240 580 1100
115 11.0 50/60 1240 580 1100
200 6.5 50/60 1240 580 1100
220 5.9 50/60 1240 580 1100
230 5.7 50/60 1240 580 1100
240 5.4 50/60 1240 580 1100
No load speed 1200/min
Tool size 30 mm hexagonal
Tool For striking (chipping with bull point, cold chisel, and scaling
chisel, digging with shovel, soil consolidation with rammer...etc.)
Net weight 16.0kg
Cord length 5m
Standard equipment
Wrench 23
Hexagon socket screw keys 5.6
Makita hammer oil XLD (100cc)
Bull point 30-410
Steel case
Optional accessories
Bull point
Cold chisel
Scaling chisel
Shovel,
Rammer...etc.
The same as 8900N, HM1301
Features and benefits
1. Electric safe double insulated structure
2. Other than the above, it has the same feature as HM1301 (details are as below)
Improved efficency with stronger strokes (30-40% up comparing 8900N)
Improved endurance of striking part by preventing dust
Minimum lubrication oil leak provides no oil splashing work environment
Less tool retainer impact provides better endurance
The standard equipment for the tools shown may differ form country to country.
Repair
1. Like 8900N/HM1301, pull out armature to the gear housing side when changing
2. Follow the procedure below to change field.
(1) Take off handle R and L
(2) Take off holder cap plate, carbon brush and rear case
(3) Change field after pulling out motor housing from crank housing
3. Assemble idler to the direction shown in the right fig.
15
Idler
Hammer
4. Apply lubricating oil or grease to the O-ring of seal holder (right fig.)
Apply lubricating oil or grease
5. Apply the adhesive "three bond 1342" to the hexagon socket head cap screw M8X30 for tightening tool holder.
Apply the adhesive "three bond 1401" to the hexagon socket head cap screw M6X18 for tightening bearing box.
6. Apply the liquid gasket "three bond 1215" to the connecting face of crank housing, gear housing, and gear
housing cover.
7. Refer to the torque shown below when tightening screws.
hexagon socket head cap screw M6x16-60 130-160kg.cm
hexagon socket head cap screw M6x35 (for binding handle) 60-80 kg.cm
hexagon socket head cap screw M8x30-35 350-400 kg.cm
hexagon socket head cap screw M10x30 (for binding connecting rod) 500-600 kg.cm