Text preview for : 6000FRU.pdf part of TOSHIBA 6000FRU TOSHIBA Laptop 6000FRU.pdf



Back to : 6000FRU.pdf | Home

FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6000 Series

GENERAL INFORMATION




Tools Required for Proper
Disassembly and Reassembly:


1. Phillips Screwdriver (Size 0&1)
2. Flat head Screwdriver
3. Security Torx (Size 7)
4. Case Separator
5. ESD Wrist Strap
6. ESD mats
7. Tweezers




Before attempting any of the following procedures,
make sure that the main battery and AC adaptor is
not connected to the unit and the environment in
which you are working on is protected from
Electro-Static Discharge(ESD).




TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6000 Series




TABLE OF CONTENTS:
1. BATTERY PACK REMOVAL
2. OPTIONAL PC CARD REMOVAL
3. SELECT BAY REMOVAL
4. CD-R/W/DVD-ROM DRIVE DISASSEMBLY
5. MEMORY MODULE REMOVAL
6. BLUETOOTH CARD REMOVAL
7. MODEM BOARD REMOVAL
8. HDD REMOVAL
9. KEYBOARD REMOVAL
10 WIRELESS LAN CARD REMOVAL
11. TOP COVER REMOVAL
12. COOLING MODULE REMOVAL
13. CPU REMOVAL
14. RTC BATTERY REMOVAL
15. POWER SUPPLY BOARD REMOVAL
16. SD/SOUND BOARD REMOVAL
17. SYSTEM BOARD REMOVAL
18. MEMBRANE SWITCH REMOVAL
19. SPEAKERS REMOVAL
20. 14.1'' DISPLAY MASK REMOVAL
21. FL INVERTER AND 14.1'' LCD REMOVAL




TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6000 Series

BATTERY PACK REMOVAL OPTIONAL PC CARD REMOVAL



Battery lock




Release
lever


PC card
Battery
Pack Eject button

1. Turn the computer upside down as shown. 1. Press the eject button of the PCCard you want to
2. Slide the battery lock to unlock position. remove.
3. Slide battery release lever in the direction of the 2. Press the extended eject button to pop the PC card
arrow. out.
3. Lift out the battery. 3. Grasp the PC card and remove it.
Note: Before removing any PC Card device, make
sure it is "STOPPED" in the PC Card manager.

SELECT BAY REMOVAL CD-R/W/DVD-ROM DRIVE DISASSEMBLY

CD-R/W/DVD-ROM
drive

Base cover




Connector M2x3 silver
flat head
Release lever Select bay screws
device M2x8 silver Connector cover
screws
1. Turn the computer upside down. 1. Remove five M2x3 silver flat head screws securing
2. Slide the release lever in the direction of the arrow. the base cover and lift out the cover.
3. Pull out the select bay device in the direction of the 2. Remove two M2x8 silver screws securing the
arrow. connector cover.
3. Remove the connector cover and the connector
from the CD-R/W/DVD-ROM drive.




TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6000 Series

MEMORY MODULE REMOVAL
Memory
slot cover




M2.5x4
black
screws




Memory clips
1. Turn the computer upside down. 4. Spread the memory clips outward and pull the
2. Remove two M2.5x4 black screws securing the memory module out of the connector on a
memory cover. 45 degree angle.
3. Lift out the memory slot cover.



BLUETOOTH CARD REMOVAL




Bluetooth cover M2x4 black security torx screw Glass tape Bluetooth card Coaxial cable
1. Remove one M2x4 security torx screw securing 3. Disconnect the coaxial cable from the bluetooth card.
the bluetooth cover. 4. Disconnect the bluetooth card from the system
2. Lift out the bluetooth cover. board.




TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6000 Series

MODEM BOARD REMOVAL
M2x4 brass screws

Modem
harness
Modem slot
cover




M2.5x4 black screw Modem board
1. Remove one M2.5x4 black screw securing the modem 3. Disconnect the modem harness from the modem
slot cover. board.
2. Insert your finger nail or the case separator into the 4. Remove two M2x4 brass screws securing the
notched side of the cover and lift up to release the two modem board.
latches securing the left side of the modem slot cover. 5. Lift up the modem board to disconnect it from the
system board.

HDD REMOVAL




HDD cover M2.5x6 black flat head screw Plastic Tab HDD pack
1. Turn the computer upside down. 4. Unfold the plastic tab and pull to remove the HDD
2. Remove one M2.5x6 black flat head screw securing from the bay.
HDD cover.
3. Remove the HDD cover.




TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6000 Series

HDD REMOVAL KEYBOARD REMOVAL

HDD bracket
Latch




Keyboard




HDD
M3x4 brass flat head screws
Keyboard holder
5. Remove two M3x4 brass flat head screws securing 1. Turn the computer right side up and open the display
the HDD to the bracket and remove the HDDbracket. panel.
2. Using the case separator, unlatch the keyboard
holder at the top of the keyboard.



KEYBOARD REMOVAL
Keyboard




Keyboard
cable




PJ445



M2.5x2.6 black screws
3. Remove two M2.5x2.6 black screws securing the 4. Lift out the keyboard and set it as shown above.
keyboard. 5. Disconnect the keyboard cable from PJ445 on the
system board.




TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6000 Series

WIRELESS LAN CARD REMOVAL




Mini-PCI
connector
clips




Mini PCI cover M2.5x4 security torx screw Wireless LAN card Black coax cable White coax cable
1. Remove one M2x4 security torx screw securing 2. Disconnect the black and white coax from the
the mini PCI cover and lift out the cover. wireless LAN card.
3. Spread the Mini-PCI connector clips and pull the
Wireless LAN card out of the connector about
45 degree angle.


TOP COVER REMOVAL
M2.5x8 silver screws

M2.5x4
black flat
head
screw




M2.5x4 black flat head screws

M2.5x20 black screws
1. Turn the computer upside down and remove the 2. Turn the computer right side up with the rear facing
following screws: you.
-12 M2.5x8 black screws 3. Remove two M2.5x4 black flat head screws
-1 M2.5x4 black flat head screw securing the top cover.
-2 M2.5x20 black screws




TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6000 Series

TOP COVER REMOVAL COOLING MODULE REMOVAL

Cooling M2.5x6
module black
flat head
screws
PJ34

LCD/FL
harness

PJ311 Fan cable

PJ310
PJ309
Left/Rigth speaker cable IPS membrane switch M2X4 brass screws PJ770
3. Disconnect the left speaker cable from PJ310 and the 1. Disconnect the fan cable from PJ770 on the top
right speaker cable from PJ311 on the top board. board.
4. Disconnect the LCD/FL harness from PJ34 and the IPS 2. Remove two M2.5x6 black flat head screws and
membrane switch from PJ311 on the system board. four M2x4 brass screws securing the cooling module.
5. Lift out the top cover assembly. 3. Lift out the cooling module.
Note: When installing the top cover, ensure that the bluetooth
coaxial cable is properly routed to the Bluetooth slot.
CPU REMOVAL RTC BATTERY REMOVAL


CPU CPU



Close

CPU lock
Open




Silicone grease PJ5 RTC harness RTC Battery
1. Insert a flat head screwdriver in the CPU lock and 1. Disconnect the RTC harness from PJ5 on the
rotate it counter-clockwise to unlock the CPU. Battery/LED board.
2. Lift out the CPU. 2. Lift out the RTC battery.
NOTE: When installing the CPU, make sure that a silicone
grease is applied before attaching the heat sink.
Please refer to FSB-200112 for the complete
procedures on how to apply the silicone grease.



TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6000 Series

POWER SUPPLY BOARD REMOVAL SD/SOUND BOARD REMOVAL

SD
System interface
board cable


PJ150

Wireless Sound
Power supply LAN switch Interface
harness button cable
PJ103


Power supply board M2.5x4 black flat head screws SD/Sound board M2.5x4 black flat head screw
1. Disconnect the power supply harness from PJ850 1. Disconnect the sound interface cable from PJ103
and PJ851 on the system board. and the SD interface cable from PJ150 on the
2. Remove two M2.5x4 black flat head screws securing SD/Sound board.
the power supply board. 2. Remove one M2.5x4 black flat head screw
3. Disconnect the power supply board from the system securing the SD/Sound board.
board. 3. Remove the wireless LAN switch button.
4. Lift out the SD/Sound board.
SYSTEM BOARD REMOVAL
PJ803




HDD guide
assy

SD
interface
M2.5x6 flat
cable
head black
screw
Sound
interface
M2.5x6 black flat head screws Select bay cover cable M2.5x4 black flat head screws DC-IN jack harness
1. Remove one M2.5x6 black flat head screw securing the 3. Disconnect following cables from the system board:
HDD guide assembly and lift out the HDD guide assembly. -Sound interface cable from PJ103
2. Remove three M2.5x6 black flat head screws securing -SD interface cable from PJ150
the select bay cover and lift out the select bay cover. -DC-IN jack harness from PJ803
4. Remove four M2.5x4 black flat head screws
securing the system board.
5. Lift out the system board.



TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6000 Series

MEMBRANE SWITCH REMOVAL SPEAKERS REMOVAL


Membrane
switch assy

Left and right
speakers




M2.5x4 black flat head screws M2.5x4 black flat head screws

1. Remove three M2.5x4 black flat head screws 1. Remove two M2.5x4 black flat head screws
securing the membrane switch. securing the left and right speakers.
2. Lift out the membrane switch assembly.




SPEAKERS REMOVAL


LCD panel




Left and Right speakers
2. Turn the display assembly right side up and open
the LCD panel.
3. Lift out the left and right speakers.




TOSHIBA
Tough Enough for Today's World.
FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite Pro
6000 Series

14.1" DISPLAY MASK REMOVAL FL INVERTER AND 14.1" LCD REMOVAL
LCD module assy
Latch


M2x3 M2x3
Display silver silver
mask screws screws


M2x5 M2x5
silver silver
LCD screws screws


LCD/
FL harness
Mask seals FL inverter board M2x4 silver screw FL cable

1. Remove two mask seals at the bottom corners of the 1. Remove one M2x4 silver screw securing the
display assembly using a pair of fine-tipped tweezers. FL inverter board.
2. Remove two M2.5x6 black flat head screws securing 2. Carefully lift up the FL inverter board and
the display mask. disconnect the LCD/FL cable from CN1 and the
3. There are 23 latches securing the display mask. FL cable from CN2.
Carefully insert your fingers between the mask and the 3. Remove four mask seals to expose four screws
LCD panel and pry open the latches starting from the securing the LCD module assembly.
six top latches, to the five latches on each right 4. Remove four M2X5 silver screws securing the
and left sides, ending with the bottom seven latches. LCD module assembly.
5. Carefully rotate out the top of the LCD module
enough to access the display cable
6. Peel off the tape securing the LCD/FL cable and
disconnect the cable.
7. Remove four M2x3 silver screws securing the
right and left LCD brackets.




TOSHIBA
Tough Enough for Today's World.