Text preview for : upgraded AVR-4306.PDF part of DENON upgraded AVR-4306 DENON AV Surround Receiver AV Surround Receiver Denon - AVR-4306 upgraded AVR-4306.PDF
Back to : upgraded AVR-4306.PDF | Home
The Operating Manual for DENON AV Receiver/Amplifier firmware upgrade Page 1 / 1
1. Confirming the firmware's number after upgraded
After completion of the updating operation, the new version number can be confirmed
by starting up the AVR-4306 / AVC-4320 according to the following procedure.
With the following operation, the AVR-4306 / AVC-4320 can be set to the Flash-ROM
Version-Number Confirmation Mode.
Turn the power of the AVR-4306 / AVC-4320 on, while holding both "SURROUND
PARAMETER" button and "STATUS" button on the front panel simultaneously.
SURROUND STATUS Turn
PARAMETER Power ON
Every time the "STATUS" Button is pressed, version numbers of the MAIN, SUB,
etc. are indicated on the front panel section in the following order.
Depression Button Name Remarks
1 STATUS MODEL AVR or AVC
2 STATUS MAIN 00.81
3 STATUS SUB 00.42
4 STATUS DSP 00.04
5 STATUS ETHERNET IMG I200602070426 (AVR)
or
I200602070408(AVC)
6 STATUS ETHERNET BL B200510231011
7 STATUS ETHERNET CNE C 20060207
8 STATUS ETHERNET MAC 0005cd-*****