Text preview for : MG2009SM.PDF part of TOSHIBA MG2009SM TOSHIBA Copiers 2060_2860_2870 2060_orig PDF MG2009SM.PDF
Back to : MG2009SM.PDF | Home
SERVICE MANUAL
SORTER MG-2009
Click the Page Only button to close the overview area of the window.
Click the Bookmarks and Page button to open the Contents and
display bookmarks created for the document. Click a bookmark's name
to go to the Page marked by that bookmark.
Click the Thumbnails and Page button to open the overview area and
display thumbnail images of each document page. Click a thumbnail to
go to the page marked by that thumbnail.
Copyright TOSHIBA CORPORATION 1996
ALL RIGHTS RESERVED
General Precautions for Installation/Servicing/Maintenance
1. When installing the Sorter MG-2009 to the Plain Paper Copier, be sure to follow the instructions
described in the "Unpacking/Set-Up Procedure for the MG-2009" booklet which comes with each unit
of the MG-2009.
2. The MG-2009 should be installed by an authorized/qualified person.
3. Before starting installation, servicing or maintenance work, be sure to unplug the copier first.
4. When servicing or maintaining the MG-2009, be careful about the rotating or operating sections such
as gears, pulleys, sprockets, cams, belts, etc.
5. When parts are disassembled, reassembly is basically the reverse of disassembly unless otherwise
noted in this manual or other related materials. Be careful not to assemble small parts such as screws,
washers, pins, E-rings, toothed washers to the wrong places.
6. Basically, the machine should not be operated with any parts removed or disassembled.
7. Delicate parts for preventing safety hazard problems (such as breakers, thermofuses, fuses, door
switches, sensors, etc. if any) should be handled/installed/adjusted correctly.
8. Use suitable measuring instruments and tools.
9. During servicing or maintenance work, be sure to check the serial No. plate and other cautionary
labels (if any) to see if they are clean and firmly fixed. If not, take appropriate actions.
10. The PC board must be stored in an antic-electrostatic bag and handled carefully using a wristband,
because the ICs on it may be damaged due to static electricity.
11. For the recovery and disposal of used MG-2009s, consumable parts and packing materials, it is rec-
ommended that the relevant local regulations/rules should be followed.
12. As the method of lifting the sorter, there are the following 2 types.
Copyright 1996
Toshiba Corporation
CHAPTER 1
GENERAL DESCRIPTION
I. FEATURES ..............................................1-1 B. Cross Section ...................................1-3
II. SPECIFICATIONS ...................................1-2 IV. OPERATIONS..........................................1-4
III. NAMES OF PARTS .................................1-3 A. During Copying Operation................1-4
A. External View ...................................1-3 B. Removing Jams................................1-6
1. GENERAL DESCRIPTION
I. FEATURES
1. Designed to be light in weight and compact in size.
Compared with the existing 20-bin sorters, the Sorter MG-2009 is designed so that its parts are not
only lighter but also fewer, while ensuring the same stacking performance. In addition, the sorter provides
higher reliability as well as serviceability.
2. Supports various types of host copiers.
The use of a straight paper path has enabled accommodation of various types of host copiers.
1