Text preview for : gpgen-06.pdf part of CANON gpgen-06 CANON Copiers GP 605 ServBull Jp_gen gpgen-06.pdf



Back to : gpgen-06.pdf | Home

Canon SERVICE BULLETIN COPIER
Issued by Canon Europa N.V.

No.: GP-GEN-006
Model: GP55-30/GP200/GP215
(98SQE-B0004)
DATE: 30.01.98



LOCATION: Windows95 PostScript Printer Driver v1.0
SUBJECT: New Release (English)

1. Outline

GP55-30/GP200/GP215 Windows95 PostScript Printer Driver v1.0 was released.
This printer driver is a customized driver for GP series based on Adobe PS 4.1.1.

2. Main Remaining Problems and Restrictions

For more detailed information, please refer to the README file that comes up with the driver.

1) Operations of On and Off in the "Installable Options/Refine" settings on the [Device
Options]Tab are opposite of the selected setting.
[Problem]
When Refine is set to On, the data of when Refine is set to Off is transmitted by the MDC
Command. Conversely, when Refine is set to Off, the data of when Refine is set to On is
transmitted by the MDC Command.
[Countermeasure]
To be deferred

2) Driver Setup - the backward button does not appear to cancel the setting of the driver's
name
[Problem]
Selecting the appropriate driver and the Next button during installation, then using the Back button
to go back and change the selection (i.e. from GP PostScript to GP200/215 PostScript) and again
selecting the Next button, the Setup does not appear to retain the new driver settings (the driver's
name). In the other words, the previous selection remains in the Setup box.
When you continue the installation, it is possible to end up with the driver name not matching the
driver actually installed.
[Cause and Countermeasure]
To be deferred, since the user can change a printer name after installing the driver.

3) The Network Interface Board-E3e/E2e cannot operate with the Automatic Configuration
mode when it is using NDS mode.
[Cause and Countermeasure]
Limitation as per the NIB board specification. The users should use Bindery mode or disable the
Automatic Configuration.


-1/2-
GP-GEN-006

3. Combinations of ROMs

1) GP200/215 Series

GP200/215 IP Ver.45.02 and later
D-CON Ver.35.04 and later
PRCON Ver.7.01
PS/PCL Ver.4.01
PCL5e Ver.4.01
NIB-E3e Ver.2.24

2) GP55/30 Series

GP55F MMI Ver.50.18 MDC NCORE Ver.90.01
IP Ver.43.01 NIB-E2 Ver.31.04
D-Con Ver.22.01 NIB-E2e Ver.2.25
PSPCL Ver.15.11
GP30F ICORE Ver.32.01 and later PCL5e Ver.15.12
IP Ver.17.01 and later
D-Con Ver.3.01




-2/2-