change74.pdf part of Funai 11AK19 TV AK19.part01.rar, Schema Elettrico e Note di servizio text manual preview

Text preview for : change74.pdf part of Funai 11AK19 Schema Elettrico e Note di servizio

Back to : TV AK19.part01.rar | Home

VESTEL ELEKTRONK A..

CHANGE BULLETIN (TCN)

CHANGE NO: 74 REF NO :UMB-176

AFFECTED MODELS: ALL MONO 90º MODELS WITH 11AK19E-3 CHASSIS.

START DATE : 15.03.2000 REASONS OF CHANGE: TO REMOVE THE "CLICK NOISE" THROUGH SPEAKERS WHEN THE TV SET IN ST-BY MODE.

NOTE 1: THE DIODE AND THE RESISTOR MUST BE CONNECTED IN SERIES AS SHOWN BELOW. THE CATHODE OF THE DIODE MUST BE CONNECTED TO JUMPER WIRE R802(JUMPER). THE OTHER END OF THE RESISTOR MUST BE SOLDERED TO JUMPER WIRE J243. THESE COMPONENTS SHOULD BE COVERED WITH AN ISOLATION COVER. THIS MODIFICATION MUST NOT BE DONE UNDER THE PCB DUE TO THE "SAFETY RULES".

RES CF 1/4W 1K J

DIODE IN4007

ISOLATION COVER

NO -

PCB CODE -

VESTEL CODE -

OUT COMPONENT NAME -

POSITION NUMBER -

QUANTITY -

NO 1 2

PCB CODE 11AK19E-3 11AK19E-3

VESTEL CODE 30001329 30000466

IN COMPONENT NAME DIODE IN4007 RES CF 1/4W 1K J

POSITION NUMBER DX RX

QUANTITY 1 1

APPLICATION ENGINEER -

APPLICATION ENG. CHIEF YILDIRAY BAKURT

APPLICATION ENG. MANAGER BEYHAN DAITAN

KALT-F.04-00.04