Text preview for : SB-2LW-0010-B316.pdf part of Kyocera SB-2LW-0010-B316 Kyocera Printer FS-3040-3140MFP SERVICEBULLETIN SB-2LW-0010-B316.pdf
Back to : SB-2LW-0010-B316.pdf | Home
(Page.1/1)
Service Bulletin Ref. No.2LW-0010 (B316)
September 21, 2011
Notes on Replacement of the FD UNIT SP
Subject
(Bundling a Cable Tie for the Motor Wire)
FS-3040MFP, FS-3140MFP, FS-3140MFP+, FS-3040MFP+,
Model
FS-3640MFP, FS-3540MFP
Topic
A cable tie and a leaflet are now bundled in FD UNIT SP in order to prevent the motor wire from being spread after
the FD UNIT SP was replaced.
[For more details on handling of the bundled cable tie, please refer to the bundled leaflet or the service bulletin SB-
2F8-0039-B272.]
*This change was referred in [Plan from now on] for the MFP products on the page 2 of the service bulletin SB-2F8-
0039-B272.
Com pati-
Old Part New Part Q'ty bi lity
No. No. No. Description Remarks
Old New Old New
302LW94180 302LW94181
1 2LW9180 2LW9181 PARTS FD UNIT SP 1 1 O O *1
2 302MC94010 302MC94011 PARTS FD UNIT SP 1 1 O O *2
2MC94010 2MC94011
7YZM420003++H01
3 - YZ052580 +ACCESS BAND - 1 - O
*1: For FS-3140MFP and FS-3040MFP
*2: For FS-3140MFP+, FS-3040MFP+, FS-3640MFP and FS-3540MFP
[Reference]
Bind the motor wire
with the cable tie
Wires from neighboring boards
FD UNIT (ASSY) motor wire
Connect board R
Correct state
KMC's Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please refer to the bundled leaflet or the service bulletin SB-2F8-0039-B272 when replacing
the FD UNIT SP.
Serial Nos. of the Affected Machines: ----------
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)