Text preview for : XP-V510-11-12-13-14.pdf part of Aiwa - Compact Disc Player XP-V510 mech. DA23L - mod. XP-V510, XP-V512, XP-V513, XP-V514 (pag. 29)
Back to : 000-012-234-514.part1.rar | Home
XP-V510 Y
XP-V511 AEZ
XP-V512 AEZ, AHK
XP-V513 AEZ, AK
XP-V514 AHC, AHR
SERVICE MANUAL
COMPACT DISC PLAYER BASIC CD MECHANISM : DA23L
MODEL TYPE
XP-V510 Y1SF
XP-V511 AEZ1SF, AEZ1GF
XP-V512 AEZ1SF, AEZ1GF, AHKJ1LLF, AHKJ1SF
XP-V513 AEZ1VF, AK1VF
XP-V514 AHC1SF, AHR1GF, AHR1SF
· This Service Manual is the "Revision Publishing" and replaces "Simple Manual"
XP-V510(Y), XP-V511(AEZ), XP-V512(AEZ,AHK), XP-V513(AEZ,AK) and
XP-V514(AHC,AHR), (S/M Code No. 09-003-423-6T3).
N
SIO
VI
RE
TA
DA
S/M Code No. 09-003-423-6R2
SPECIFICATIONS <510Y, 511AEZ, 512AEZ, 513AEZ, 513AK>
Tracking system: 3-beam laser
Laser pickup: Semiconductor laser
D/A conversion: 4-times oversampling digital filter + 1-bit DAC
Frequency response: 20 - 20,000 Hz
Output: PHONES / LINE OUT jack (stereo mini-jack)
Maximum output: 10 mW + 10 mW (EIAJ 16 ohms at 1 kHz)
500 mV (47 kohms at 1 kHz)
Power supply: DC 3 V using two LR6 (size AA) alkaline
batteries
DC 2.4 V using two commercially available
(Ni-Cd 1.2 V 700 mAh) rechargeable batteries
<510Y, 511AEZ>
DC 2.4 V using two supplied
(Ni-Cd 1.2 V 700 mAh) rechargeable batteries
<512AEZ, 513AEZ, 513AK>
AC house current using the supplied AC
adaptor
AC house current using an optional AC adaptor
<510Y only>
Dimensions: 127.9 (W) x 28.4 (H) x 130.6 (D) mm
(5 1/8 x 1 1/8 x 5 1/4 in.)
Weight: Approx. 202.3 g (7.1 oz.) excluding batteries
AC adaptor AC-D603: Rated voltage
AC 230 V, 50 Hz
· Design and specifications are subject to change without
notice.
SPECIFICATIONS <512AHK, 514AHC, 514AHR>
Tracking system: 3-beam laser
Laser pickup: Semiconductor laser
D/A conversion: 4-times oversampling digital filter + 1-bit DAC
Frequency response: 20 - 20,000 Hz
Output: PHONES / LINE OUT jack (stereo mini-jack)
Maximum output: 12 mW + 12 mW (EIAJ 16 ohms at 1 kHz)
500 mV (47 kohms at 1 kHz)
Power supply: DC 3 V using two LR6 (size AA) alkaline
batteries
DC 2.4 V using two supplied
(Ni-Cd 1.2V 700mAh) rechargeable batteries
<512AHK, 514AHC>
DC 2.4 V using two commercially available
(Ni-Cd 1.2 V 700 mAh) rechargeable batteries
<514AHR>
AC house current using the supplied AC adaptor
Dimensions: 127.9 (W) x 28.4 (H) x 130.6 (D) mm
(5 1/8 x 1 1/8 x 5 1/4 in.)
Weight: Approx. 202.3 g (7.1 oz.) excluding batteries
AC adaptor AC-D603: Rated voltage
230 V AC, 50 Hz<512AHK>
115 / 230 V AC, switchable, 50 / 60 Hz <514AHR>
220 V AC, 50 Hz<514AHC>
· Design and specifications are subject to change without
notice.
2
PROTECTION OF EYES FROM LASER BEAM DURING SERVICING
This set employs laser. Therefore, be sure to follow carefully the CAUTION
instructions below when servicing. Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
WARNING! radiation exposure.
WHEN SERVICING, DO NOT APPROACH THE LASER EXIT
WITH THE EYE TOO CLOSELY. IN CASE IT IS NECESSARY TO ATTENTION
CONFIRM LASER BEAM EMISSION. BE SURE TO OBSERVE L'utilisation de commandes, réglages ou procédures autres que
FROM A DISTANCE OF MORE THAN 30cm FROM THE ceux spécifiés peut entraîner une dangereuse exposition aux
SURFACE OF THE OBJECTIVE LENS ON THE OPTICAL radiations.
PICK-UP BLOCK.
ADVARSEL!
Caution: Invisible laser radiation when
Usynlig laserståling ved åbning, når sikkerhedsafbrydereer ude
open and interlocks defeated avoid expo-
af funktion. Undgå udsættelse for stråling.
sure to beam.
Advarsel:Usynling laserståling ved åbning,
This Compact Disc player is classified as a CLASS 1 LASER
når sikkerhedsafbrydere er ude af funktion.
product.
Undgå udsættelse for stråling.
The CLASS 1 LASER PRODUCT label is located on the rear
exterior.
VAROITUS!
Laiteen Käyttäminen muulla kuin tässä käyttöohjeessa mainit-
ulla tavalla saattaa altistaa käyt-täjän turvallisuusluokan 1 ylit-
CLASS 1 LASER PRODUCT
tävälle näkymättömälle lasersäteilylle. KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
VARNING!
Om apparaten används på annat sätt än vad som specificeras i
denna bruksanvising, kan användaren utsättas för osynling
laserstrålning, som överskrider gränsen för laserklass 1.
Precaution to replace Optical block
(SF-P200)
Body or clothes electrostatic potential could ruin
laser diode in the optical block. Be sure ground
body and workbench, and use care the clothes : SOLDER
do not touch the diode.
1) After the connection, remove solder shown in
the right figure.
1 9 10 15 16
PICK UP ASSY
3
ELECTRICAL MAIN PARTS LIST
REF. NO. PART NO. KANRI DESCRIPTION REF. NO. PART NO. KANRI DESCRIPTION
NO. NO.
IC C451 87-010-831-080 C-CAP,U,0.1-16F
C501 87-016-429-080 C-CAP,E 100-4 5.5N
87-A21-446-010 C-IC,MN662782RPT1 C502 87-010-831-080 C-CAP,U,0.1-16F
87-A21-140-040 C-IC,MSM51V17400D C504 87-010-831-080 C-CAP,U,0.1-16F
87-A21-578-040 C-IC,AN8838NSB C505 87-A11-228-080 C-CAP,U 0.027-25 K B
87-A21-543-040 IC,NJU7012
87-A21-449-040 C-IC,AN8746SA C506 87-012-199-080 CAP 220P
C507 87-012-193-080 C-CAP,U 82P-50 CH
87-A21-085-040 C-IC,TA2120FN C508 87-012-193-080 C-CAP,U 82P-50 CH
87-A21-448-040 C-IC,BH6554FV C509 87-012-273-080 C-CAP,U 820P-50 B
8A-HC4-611-010 C-IC,MN101C439AA C510 87-016-429-080 C-CAP,E 100-4 5.5N
8A-HCH-602-010 C-IC,MN101C439-AD
C512 87-016-429-080 C-CAP,E 100-4 5.5N
C514 87-A11-228-080 C-CAP,U 0.027-25 K B
TRANSISTOR C515 87-A11-228-080 C-CAP,U 0.027-25 K B
C516 87-A10-260-080 C-CAP,U 0.1-16 K B
87-026-608-080 C-TR,DTC 123 JK C518 87-012-176-080 C-CAP,U 15P-50
87-A30-075-080 C-TR,2SA1235F
89-211-323-080 C-TR,2SB1132R C519 87-012-176-080 C-CAP,U 15P-50
89-416-643-080 C-TR,2SD1664R C520 87-016-426-080 C-CAP,E 47-4 5.5N
87-A30-076-080 C-TR,2SC3052F C521 87-012-274-080 CHIP CAP,U 1000P-50B
C530 87-A10-047-080 C-CAP,U 1-10 Z F
89-113-695-680 C-TR,2SA1369G/H C601 87-016-430-080 C-CAP,E 100-6.3 5.5N
87-A30-278-040 C-FET,2SK2980
87-026-350-080 C-TR,DTC114TU C602 87-012-286-080 CAP, U 0.01-25
87-A30-237-080 C-TR,UMG5N C603 87-012-286-080 C-CAP, U 0.01-25
87-A30-282-040 C-TR,DTA114TKA C701 87-016-558-080 C-CAP,TN47-6.3F93B
C702 87-012-271-080 C-CAP,U 560P-50 CH
87-026-239-080 TR,DTC114TK (0.2W) C703 87-012-271-080 C-CAP,U 560P-50 CH
C706 87-010-831-080 C-CAP,U 0.1-16F
DIODE C707 87-A10-047-080 C-CAP,U 1-10 Z F
C708 87-A10-047-080 C-CAP,U 1-10 Z F
87-A40-270-080 C-DIODE,MC2838 C709 87-A10-047-080 C-CAP,U 1-10 Z F
87-017-520-080 C-DIODE,SFPB52 C710 87-016-561-080 C-CAP,E 10-6.3 MF
87-A40-570-080 C-ZENER,UDZ10B
87-A40-590-040 C-DIODE,HRW0202A C711 87-A11-241-080 C-CAP,TN 22-6.3 M F93 A
C712 87-A10-353-080 C-CAP,U0.22-10KB
C713 87-010-831-080 C-CAP,U,0.1-16F
MAIN C.B C714 87-A11-062-080 C-CAP,S 2.2-16 Z F
C715 87-016-561-080 C-CAP,E 10-6.3 MF
C202 87-016-422-080 C-CAP,E 22-6.3
C203 87-012-286-080 CAP, U 0.01-25 C716 87-010-831-080 C-CAP,U,0.1-16F
C204 87-016-429-080 C-CAP,E 100-4 5.5N C717 87-010-831-080 C-CAP,U,0.1-16F
C205 87-010-805-080 C-CAP,S 1-16 Z F C718 87-016-431-080 C-CAP,E 220-4 5.5N
C206 87-012-286-080 C-CAP, U 0.01-25 C719 87-016-431-080 C-CAP,E 220-4 5.5N
C720 87-012-274-080 CHIP CAP,U 1000P-50B
C207 83-HC3-635-080 C-CAP,E 220-6.3 WF
C208 87-016-426-080 C-CAP,E 47-4 5.5N C721 87-012-274-080 CHIP CAP,U 1000P-50B
C209 87-010-831-080 C-CAP,U,0.1-16F CN201 87-A61-147-080 C-CONN,7P V ZH-SM3
C210 87-A10-047-080 C-CAP,U 1-10 Z F CN301 87-A60-756-080 C-CONN,24P V 24FLT-SM1TB
C211 87-010-787-080 CAP, U 0.022-25 CN501 87-009-214-080 C-CONN,16P 52207
CN601 87-009-411-010 CONN,6P ZH V
C212 87-012-267-080 C-CAP,U 270P-50 B
C213 87-010-805-080 C-CAP,S 1-16 Z F FC301 8A-HC5-631-010 FF-CABLE, 24P 0.5MM
C303 87-010-831-080 C-CAP,U,0.1-16F J701 85-HC5-616-010 JACK,3.5 ST W/R GRN
C304 87-010-831-080 C-CAP,U,0.1-16F L201 87-A50-355-080 C-COIL,330UH LQH3C
C305 87-012-286-080 CAP, U 0.01-25 L202 87-A50-330-080 C-COIL,100UH-D75C
L203 87-A50-355-080 C-COIL,330UH LQH3C
C306 87-012-286-080 CAP, U 0.01-25
C307 87-012-286-080 CAP, U 0.01-25 L302 87-A50-367-080 C-COIL, 10UH LQG21F
C309 87-A11-241-080 C-CAP,TN 22-6.3 M F93A L401 87-A50-367-080 C-COIL, 10UH LQG21F
C401 87-016-429-080 C-CAP,E 100-4 5.5N L402 87-A50-012-080 C-COIL,100UH LQH3C
C403 87-016-558-080 C-CAP,TN 47-6.3 F93 B L501 87-A50-117-080 C-COIL, 10UH LQH3C
L502 87-A50-367-080 C-COIL, 10UH LQG21F
C405 87-A10-260-080 C-CAP,U 0.1-16 K B
C406 87-012-273-080 C-CAP,U 820P-50 B S302 87-A90-494-080 C-SW,SL 1-1-3 SSSS81
C406 87-012-271-080 C-CAP,U 560P-50 B S303 87-A90-494-080 C-SW,SL 1-1-3 SSSS81
C407 87-010-787-080 CAP, U 0.022-25 VR701 87-A91-145-080 C-VR,RTRY 30KCX2 H RK14J12R
C408 87-A10-353-080 C-CAP,U0.22-10KB X401 87-A70-201-080 C-VIB,CER 16.93MHZ CSTCV-MXJ0C
C409 87-A10-827-080 C-CAP,U 0.47-6.3 K B
C410 87-012-286-080 CAP, U 0.01-25 JACK C.B
C411 87-010-831-080 C-CAP,U,0.1-16F
C412 87-016-558-080 C-CAP,TN 47-6.3 F93 B C102 87-010-060-010 CAP,E 100-16V
C413 87-010-831-080 C-CAP,U,0.1-16F C103 87-012-286-080 CAP, U 0.01-25
C104 87-015-677-010 CAP,E 100-6.3V
C415 87-010-831-080 C-CAP,U,0.1-16F C105 87-012-286-080 CAP, U 0.01-25
C417 87-012-188-080 C-CAP,U 47P-50 CH CN101 8A-HC4-633-010 CONN ASSY,7P V 1.5MM
C421 87-010-831-080 C-CAP,U,0.1-16F
C422 87-010-831-080 C-CAP,U,0.1-16F J101 87-A60-421-010 JACK,DC HEC3600 BLK 6
C423 87-010-831-080 C-CAP,U,0.1-16F S101 87-A91-622-010 SW,MICRO PV1102
4
REF. NO. PART NO. KANRI DESCRIPTION
NO.
LID C.B
C802 87-012-274-080 CHIP CAP 1000P
C803 87-010-831-080 C-CAP,U 0.1-16F
LCD801 8A-HC5-621-010 LCD,AHC-5 REFLEX
S801 87-A90-232-080 C-SW,TACT SKQRAA
S802 87-A90-232-080 C-SW,TACT SKQRAA
S803 87-A90-232-080 C-SW,TACT SKQRAA
S804 87-A90-232-080 C-SW,TACT SKQRAA
S805 87-A90-232-080 C-SW,TACT SKQRAA
S806 87-A90-232-080 C-SW,TACT SKQRAA
S807 87-A90-232-080 C-SW,TACT SKQRAA
= <510Y1SF,511AEZ1SF,512AEZ1SF,512AHKJ1LLF,513AK1VF>
= <511AEZ1GF,512AHKJ1SF,512AEZ1GF,513AEZ1VF,514AHR1GF,514AHR1SF,514AHC1SF>
CHIP RESISTOR PART CODE
Chip Resistor Part Coding
8 8
A
Figure
Resistor Code
Value of resistor
Chip resistor
Dimensions (mm) :A
Wattage Type Tolerance Symbol Form L W t Resistor Code : A
1/16W 1005 5% CJ 1.0 0.5 0.35 104
L
1/16W 1608 5% CJ t 1.6 0.8 0.45 108
1/10W 2125 5% CJ W 2 1.25 0.45 118
1/8W 3216 5% CJ 3.2 1.6 0.55 128
5
TRANSISTOR ILLUSTRATION
C D B1
E
B2
B G C1
E S C2
B C E
2SA1235 2SA1369 2SK2980 UMG5N
2SC3052 2SB1132
DTA114TKA 2SD1664
DTC114TK
DTC114TU
DTC123JK
6
WIRING - 1 (MAIN / JACK) 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
B B
C C
D D
E E
F F
G G
H H
I I
J J
K K
L L
M M
N N
O O
P P
Q Q
R R
S S
T T
U U
7
SCHEMATIC DIAGRAM - 1 (MAIN / JACK)
8
WIRING - 2 (MAIN / JACK) 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
B B
C C
D D
E E
F F
G G
H H
I I
J J
K K
L L
M M
N N
O O
P P
Q Q
R R
S S
T T
U U
9
SCHEMATIC DIAGRAM - 2 (MAIN / JACK)
10
WIRING - 3 (LID)
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
11
SCHEMATIC DIAGRAM - 3 (LID)
12
LCD DISPLAY
1
13
IC BLOCK DIAGRAM
IC,AN8746SA
IC,TA2120FN
14
BH6554FV
AN8838NSB
15
WAVEFORM
1 IC501 PIN 7 (RF) 3 IC501 PIN 20 (FEOUT)
0.5 V/div 50 mV/div
0.2 µs/div 1 ms/div
2 IC501 PIN 25 (TEOUT) 4 IC301 PIN 10 (OSC1)
50 mV/div 1 V/div
1 ms/div 50 ns/div
16
IC DESCRIPTION
IC, MN101C439AA / IC, MN101C439-AD
Pin No. Pin Name I/O Description
1 COM03 O LCD common output.
2 COM02 O LCD common output.
3 COM01 O LCD common output.
4 COM00 O LCD common output.
5 VLC3 - LCD drive voltage setting terminal.
6 VLC2 - LCD drive voltage setting terminal.
7 VLC1 - LCD drive voltage setting terminal.
8 VDD - LCD power.
9 OSC2 O Micon main clock oscillator output (not used).
10 OSC1 O Micon main clock oscillator output.
11 VSS - GND.
12 XI I Sub clock oscillator (connected to GND).
13 XO O Sub clock oscillator (not used).
14 MMOD I Processor mode unused (connected to GND).
15 VREF- - Connected to GND.
16 K-FUNC I "FUNCTION" key input.
17 K-P/S I "PLAY" and "STOP" key inputs.
18 ACIN I AC adaptor detection.
19 VDIN I Main clock (8 MHz).
20 K-RMC I Wired remote control input.
21 SWDO I Digital out "ON/OFF" input. ON at "L" (connected to GND).
22 SWEASS I EASS mode selection input. Refer to A/D table.
23 SWR/H I RESUME/HOLD switch input.
24 VREF+ - Connected to VDD.
25 SWIL I Limited SW input.
26 PC O Power off output for CD serve driver. Power off at "L".
27 CD-RW O CD-RW PLAY gain level selection output. Gain set at "H".
28 CD-RW O CD-RW PLAY gain level selection output. Gain set at "L".
29 SUBQ O Power down output for H/A.
30 SQCK O Selection output for EASS gain control. EASS at "L".
31 BEEP O Buzzer output for headphone.
32 RST I Micro computer RESET input.
33 NRST O DSP RESET output.
34 STAT I DSP STAT input.
35 MLD O DSP MLD output.
36 MDATA O DSP MDATA output.
37 MCLK O DSP MCLK output.
38 BLKCK I DSP BLKCK input.
39 RSENSOR I Wireless remote control sensor signal input (not used).
40 4/5 I XP-V7xx or XP-V5xx selection input. XP-V7xx at "H", XP-V5xx at "L" (connected to GND).
41 NC - Not connected.
42 PU-ON O H/A power down output.
17
Pin No. Pin Name I/O Description
43 EASSON O EASS gain up selection output. EASS ON at = "L".
44 DSL2 O Headphone DSL2 control output. DSL2 at "H". DSL1/OFF at "L".
45 DSL1 O Headphone DSL ON control output. DSL ON at "H".
46 MUTE O Audio mute output.
47 STANDBY O Headphone standby output. Standby at "L". Power ON at "H".
48 LCDRDO O Wired LCD remote control output (not used).
49 P-OFF O Power IC power off output. Power OFF at "L".
50 DSCHRG O Discharge output.
51 CHRG O Charge output.
52 BAT-F O Battery balance indication FULL INDICATION LED output (not used).
53 BAT-M O Battery balance indication MEDIUM INDICATION LED output (not used).
54 BAT-E O Battery balance indication EMPTY INDICATION LED output (not used).
55 2.5V - Not used.
56 SWCL I Cover OPEN/CLOSE detection switch input .
57 EL-ON O EL back light control output (not used).
58 SPCON O Spindle PWM control output (not used).
59 CAR-LED O CAR-KIT model button LED light output (not used).
60 E-MODE I Shaft damage mode (No shaft damage mode found at "H") (not used).
61 TEST I Enter test mode at "L" (not used).
62 M1/NM2 I 10 or 10/40 sec selection input. 10 sec at "H", 10/40 sec at "L".
63 NC - Not connected.
64 SEG15 O LCD segment output.
65 SEG14 O LCD segment output.
66 SEG13 O LCD segment output.
67 SEG12 O LCD segment output.
68 SEG11 O LCD segment output.
69 SEG10 O LCD segment output.
70 SEG09 O LCD segment output.
71 SEG08 O LCD segment output.
72 SEG07 O LCD segment output.
73 SEG06 O LCD segment output.
74 SEG05 O LCD segment output.
75 SEG04 O LCD segment output.
76 SEG03 O LCD segment output.
77 SEG02 O LCD segment output.
78 SEG01 O LCD segment output.
79 SEG00 O LCD segment output.
80 NC - Not connected.
18
A/D TABLE
HEX K-FUNC (PIN 16) SWEASS (PIN 22) SWR/H (PIN 23) K-P/S (PIN 17)
E8 ~ FF OFF EASS ON RESUME OFF
CB ~ E8 NOT USED OFF OFF PLAY
AD ~ CA DSL OFF OFF PLAY
90 ~ AC MODE OFF OFF PLAY
71 ~ 8F ENTER 0FF HOLD/RESUME PLAY
53 ~ 70 B.S OFF HOLD/RESUME STOP
35 ~ 52 F.S OFF HOLD/RESUME STOP
17 ~ 34 NOT USED OFF OFF STOP
1 ~ 16 OFF OFF OFF OFF
A/D TABLE
HEX K-RMC (PIN 20)
E8 ~ FF OFF
BB ~ E8 NOT USED
89 ~ BA DSL
5F ~ 88 PLAY
42 ~ 5E MODE
2E ~ 41 STOP
1F ~ 2D B.S
OB ~ 1E F.S
00 ~ 0A OFF
19
IC, MN662782RPT1
Pin No. Pin Name I/O Description
1 DVDD3 - Power supply for DRAM interface.
2 D0 I/O Input/Output data 0 for DRAM.
3 D1 I/O Input/Output data 1 for DRAM.
4 NWE O Output write enable signal for DRAM.
5 NRAS O Output RAS control signal for DRAM.
6 D2 I/O Input/Output data 2 for DRAM.
7 D3 I/O Input/Output data 3 for DRAM.
8 NCAS0 O Output CAS control signal 0 for DRAM.
9 A10 O Output address signal 10.
10 ~ 14 A8 ~ A4 O Output address signal 8 ~ 4.
15 A9 O Output address signal 9.
16 ~ 19 A0 ~ A3 O Output address signal 0 ~ 3.
20 DVSS2 - Ground for digital circuit.
21 DVDD2 - Power supply for digital circuit.
22 SPOUT O PWM output of spindle.
23 TRVM O PWM output of negative traverse signal.
24 TRVP O PWM output of positive traverse signal.
25 TRM O PWM output of negative tracking signal.
26 TRP O PWM output of positive tracking signal.
27 FOM O PWM output of negative focus signal.
28 FOP O PWM output of positive focus signal.
29 FBAL O Output for focus balance adjustment.
30 TBAL O Output for tracking balance adjustment.
31 VREF - Reference voltage for DA output (TRVP, TRP, FOM, FOP, FBAL, TBAL, DSLF2).
32 FE I Focus error signal input (analog input).
33 TE I Tracking error signal input (analog input).
34 RFENV I RF envelope signal input (analog input).
35 OFT I Off track signal input. "H" : Off track.
36 NRFDET I RF detection signal input. "L" : Detect.
37 BDO I Drop out signal input. "H" : Drop out.
38 LDON O Laser ON signal output. "H" : ON.
39 ARF I RF signal input.
40 IREF I Reference current input terminal.
41 ADPVCC - Reference voltage level for PWM output drive.
42 DSLF O Loop filter terminal for DSL.
43 DSLF2 O DSL unbalance current.
44 PLLF O Loop filter terminal for PLL.
45 VCOF O Loop filter terminal for pitch controller and jitter free VCO.
46 AVDD2 - Power supply for analog circuit (DSL, PLL, VCOF, AD, DA).
47 AVSS2 - Ground for analog circuit (DSL, PLL, VCOF, AD, DA).
48 OUTL O Output Lch audio.
49 AVSS1 - Ground for analog circuit (for audio output).
20
Pin No. Pin Name I/O Description
50 OUTR O Output Rch audio.
51 AVDD1 - Power supply for analog circuit (for audio output).
52 FSEL I Input noise filter ON / OFF switching. "L" : ON. "H" : OFF.
53 TMOD1 I Terminal mode switching input 1 (connected to GND).
54 TMOD2 I Terminal mode switching input 2 (connected to GND).
55 FLAG O Flag signal output (not used).
56 CLVS/IPFLAG - Not used.
57 ~ 59 EXT 0 ~ 2 I/O Expansion input / output port 0 ~ 2 (not used).
60 TX O Digital audio interface output signal.
61 MCLK I Microcomputer command clock signal input (latch data at rising edge).
62 MDATA I Microcomputer command data signal input.
63 MLD I Microcomputer command load signal input. "L" : Load.
Input sub code block clock signal (fBLKCK = 75kHz) / Input SYNC signal for
64 BLKCK I
CDTEXT (fDQSY = 300kHz).
65 SQCK/BCLK I Input clock for sub code Q register.
66 SUBQ/LRCK O Output sub code Q data.
67 DMUTE/SRDATA I Input mute. "H" : Mute (connected to GND).
Output status signal (CRC,RESY,CLVS,NTTSTOP,SQOK,FLAG6,SENSE,NFLOCK,
68 STAT O
NTLOCK,BSSEL,SUBQDATA,CDTEXT DATA,ANT-SHOCK READ OUT DATA.)
69 NRST I Input reset. "L" : Reset.
70 SPPOL O PWM output of spindle signal drive.
71 PMCK O 88.2kHz clock signal output (not used).
72 SMCK O 4.2336MHz clock signal output.
73 SUBC/SSYNC O Output sub code serial (not used).
74 SBCK/64FS I Input clock for subcode serial (not used).
75 NCLDCK O Sub code frame clock signal output ( fCLDCK = 7.35kHz) (not used).
76 NTEST - Test terminal (connected to power supply).
77 X1 I Crystal oscillator circuit input terminal (f = 16.93MHz).
78 X2 O Crystal oscillator circuit output terminal (f = 16.93MHz).
79 DVDD1 - Power supply for digital circuit.
80 DVSS1 - Ground for digital circuit.
21
TEST MODE
A MAIN C.B
VC
GND
CN201
IC401 IC301
CN301
FE
TE
VR701
A MAIN C.B
IC501
IC601
CN601
IC201
IC451
FE
TEST LAND RF
IC701
B JACK C.B
J101
SW
LAND
CN101 S101
22
The servo circuit of this model is designed to be adjustment-free and the adjustment value and disc distinction (CA-DA. CD-R and CD-
RW etc.) is adjusted by within the IC. Therefore the adjustment is performed by each TOC reading. The adjustment conditions within the
IC of each servo can be monitored in this test mode.
1. How to start the Test Mode
Starting method of the test mode differ depending upon the type of disc being used. This is because the adjustment values of each
servo also differ depending upon the type of disc.
When using the CD-DA or CD-R
1) Short-circuit the test land and the OPEN/CLOSE SW land.
2) Insert the AC plug and install the CD-DA or CD-R disc.
3) Press the PLAY and STOP buttons in this sequence and read the TOC.
4) Press the DISPLAY/ENTER button and confirm that all LCD light up.
When using the CD-RW
1) Short-circuit the test land and the OPEN/CLOSE SW land.
2) Insert the AC plug and install the CD-RW disc.
3) Press the PLAY, STOP and DSL buttons in this sequence and read the TOC. The LCD display should display CD-r at this point.
4) Press the DISPLAY/ENTER button and confirm that all LCD light up.
Note 1) If the TOC cannot be read, press the DISPLAY/ENTER button once "Err" has appeared on the LCD, causing all the LCDs to
become lit up. The following steps 2 and 3 can be confirmed even if the TOC cannot be read.
Note 2) By repeatedly pressing the DISPLAY/ENTER button, all LCD will light up and the TOC display will be repeated.
Note 3) By repeatedly pressing the DSL button, the "CD-d" and "CD-r" displays will be repeated.
When the LCD displays "CD-d," ¡ CD-DA, CD-R is selected.
When the LCD displays "CD-r," ¡ CD-RW is selected.
Note 4) The test mode is cancelled by disconnecting the AC plug and removing the soldering of short land.
2. DISC distinction (confirmation of FE waveform)
This mode is possible to perform a confirmation of the disc distinction.
Confirmation method
1) Press the DSL button and select "CD-d" or "CD-r" (Refer to Note 3).
2) Install the disc.
3) Press the MODE button.
The LCD will change as follows.
Example: Test disc: TCD-782, DISC type select: CD-d, Judgement value: 7F, Measurement value: 3D BE.
Judgement value Measurement value
*All numerical values are displayed in HEX
What disc the IC has selected can be understood according to this judgment value.
The decision standard of IC is as follow.
LCD displays "CD-r"
LCD displays "CD-d"
0 < Judgment value < 10 No disc No disc
10 < Judgment value < 32 CD-RW No disc
32 < Judgment value < C8 CD-DA and CD-R CD-RW
C8 < Judgment value CD-DA and CD-R
The state of the FE waveform can also be understood from this judgment value.
3. Confirmation of sled movement
By pressing the F. SKIP or B. SKIP button continuously when all LCD light up, it is possible to transfer the pick-up to either the outer
circumference or the inner circumference (the LCD is to remain all light up).
23
4. Confirmation of the RF level
Test point: RF and VC (Vref)
Test disc: TCD-782
Confirm that the RF waveform appears as shown below.
At 0.8 Vp-p or greater
VOLT/DIV: 200mV
TIME/DIV: 0.5us
5. Confirmation of tracking balance
Test point: TE and VC (Vref)
Test disc: TCD-782
Press the DSL button while the test disc is playing and confirm that the traverse waveform is as is shown below.
VC
VOLT/DIV: 200mv
TIME/DIV: 2ms
6. Confirmation of each servo
It is possible to confirm the adjustment value of each servo by repeatedly pressing the MODE button while the test disc is playing. The
switchover sequence is as stated below.
Confirmation mode OFF -> Focus bias (FB) -> Tracking balance (TB) -> Tracking gain (TG) -> Tracking error offset (TEO) -> Focus
gain (FG) -> Focus error offset (FEO) -> Confirmation mode OFF
Example: Tracking error offset (TEO) Adjustment value-> 03
Tracking error offset (TEO) display Adjustment value
*Adjustment values are displayed in HEX.
24
MECHANICAL EXPLODED VIEW 1 / 1
25
MECHANICAL EXPLODED PARTS LIST 1 / 1
REF. NO. PART NO. KANRI DESCRIPTION
NO.
1 8A-HC5-014-010 SH,DISPLAY AU(5)<[S]511AEZ,[G]511AEZ>
1 8A-HC5-017-010 SH,DISPLAY EZ (V510)<[S]510Y>
1 8A-HC5-020-010 SH,DISPLAY EZ(V512)<[S]512AEZ,[G]512AEZ,[LL]512AHK,[S]512AHK>
1 8A-HC5-019-010 SH,DISPLAY EZ(V513)<[V]513AK,[V]513AEZ>
1 8A-HC5-031-010 SH,DISPLAY HC(V514)<[G]514AHR,[S]514AHR,[S]514AHC>
2 8A-HC5-011-110 PANEL,CD (5)
3 8A-HC5-006-010 KEY,PLAY (5)
4 8A-HC5-007-110 KEY,DSL (5)
5 8A-HC5-016-110 LID,CD ASSY EZ(5)<[S]512AEZ,[S]514AHR,[S]510Y,[S]514AHC,[S]511AEZ,[S]512AHK,[G]511AEZ>
5 8A-HC5-048-010 LID,CD ASSY GREEN (V511)<[G]514AHR,[G]512AEZ>
5 8A-HC5-042-010 LID,CD ASSY LBLUE (V512)<[LL]512AHK>
5 8A-HC5-064-010 LID,CD ASSY VIOLET (V513)<[V]513AK,[V]513AEZ>
6 8A-HC4-208-010 PLATE,LCD
7 8Z-HC5-207-010 JOINT,LCD ZHC-5
8 8A-HC5-012-110 HLDR,LID CD (5)
9 8A-HC4-204-110 SPR-T,LID
10 85-HC6-205-110 SHAFT,LID(300) HK
11 8A-HC4-015-110 CABI,CENTER AU(4)<[S]512AEZ,[S]510Y,[S]511AEZ,[S]512AHK>
11 8A-HC4-025-010 CABI,CENTER EZ(V714)<[S]514AHR,[S]514AHC>
11 8A-HC5-043-010 CABI,CENTER LBLUE (V512)<[LL]512AHK>
11 8A-HC5-065-010 CABI,CENTER VIOLET (V513)<[V]513AK,[V]513AEZ>
11 8A-HC5-049-010 CABI,CENTER GREEN (V511)<[G]512AEZ,[G]511AEZ>
11 8A-HC5-053-010 CABI,CENTER GREEN (V514)<[G]514AHR>
12 8A-HC4-008-110 KNOB,SL OPEN
13 8A-HC4-205-010 SPR-T,KNOB
14 8A-HC4-206-010 LEVER,OPEN
15 8A-HC4-207-010 HLDR,OPEN
16 8Z-HC1-225-010 DMPR,MECHA(SP)
17 8A-HC4-202-010 BAT-CONTACT,(+)
18 8A-HC4-201-110 BAT-CONTACT,(-)
19 8A-HC4-203-110 BAT-CONTACT,(+-)
20 8A-HC5-052-010 CABI,BOTTOM ASSY GREEN (V511)<[G]512AEZ,[G]511AEZ>
20 8A-HC5-055-010 CABI,BOTTOM ASSY GREEN (V514)<[G]514AHR>
20 8A-HC4-019-110 CABI,BOTTOM ASSY AU(4)<[S]512AEZ,[S]510Y,[S]511AEZ,[S]512AHK>
20 8A-HC4-027-110 CABI,BOTTOM ASSY EZ (V714)<[S]514AHR,[S]514AHC>
20 8A-HC5-045-010 CABI,BOTTOM ASSY LBLUE (V512)<[LL]512AHK>
20 8A-HC4-048-010 CABI,BOTTOM ASSY LBLUE (V714)<[G]511AEZ>
20 8A-HC5-068-010 CABI,BOTTOM ASSY VIOLET (V513)<[V]513AK,[V]513AEZ>
21 88-HC6-021-010 FOOT, DIA10
22 8A-HC4-009-010 KNOB,SL HOLD
23 8A-HC4-012-010 KNOB,SL EASS<[G]514AHR,[V]513AK,[V]513AEZ,[G]512AEZ,[LL]512AHK,[G]511AEZ>
A 87-067-736-010 SCREW,1.4-2 BLK NLOCK
B 87-067-732-010 TAPPING SCREW, VT1.4-3
C 87-067-869-010 V+1.7-8 HL BLK
COLOR NAME TABLE
Basic color symbol Color Basic color symbol Color Basic color symbol Color
B Black C Cream D Orange
G Green H Gray L Blue
LT Transparent Blue N Gold P Pink
R Red S Silver ST Titan Silver
T Brown V Violet W White
WT Transparent White Y Yellow YT Transparent Yellow
LM Metallic Blue LL Light Blue GT Transparent Green
LD Dark Blue DT Transparent Orange GM Metallic Green
YM Metallic Yellow DM Metallic Orange
26
CD MECHANISM EXPLODED VIEW 1 / 1
D
D
2
4
9
A
3
5
1
7
8
C
6
10
B
27
CD MECHANISM PARTS LIST 1 / 1
REF. NO. PART NO. KANRI DESCRIPTION
NO.
1 S0-A41-A20-600 PICKUP LASER ASSY
2 SM-10A-108-001 MOTOR ASSY SPINDLE
3 S0-M10-A10-900 MOTOR SLED ASSY
4 S2-311-A12-200 CHASSIS
5 S2-511-A23-200 GEAR MIDDLE
6 S2-511-A23-100 GEAR,SCREW
7 S2-511-A23-400 GEAR,RACK
8 S2-511-A07-900 SPINDLE SCREW
9 S4-S13-A00-200 SW,LEAF
10 S2-451-A18-100 HOLDER GEAR
A SS-EXE-A04-000 SCR PAN PCS 1.4-2.2
B SS-GXE-A00-300 SPECIAL SCREW
C SS-EXE-A14-100 SPECIAL SCREW
D SS-GXE-A00-202 SPECIAL SCREW M1.7-4.0
ACCESSORIES / PACKAGE LIST
REF. NO. PART NO. KANRI DESCRIPTION
NO.
1 8A-HC5-905-010 IB,EZ (EGF) - IN <512AEZ,513AEZ,513AK>
1 8A-HC5-908-010 IB,HR (ECA) V514- IN <514AHR>
1 8A-HC5-915-010 IB,EZ (EGF) V511- IN <511AEZ>
1 8A-HC5-918-010 IB,Y (EGF) - IN <510Y>
1 8A-HC5-928-010 IB,HK (EC) V512- IN <512AHK>
1 8A-HC5-913-010 IB,HC (EC) V514- IN <514AHC>
2 8Z-HC4-100-010 RC UNIT,RC-V74<514AHR,514AHC>
3 87-B30-326-010 HEADPHONE,HP-M048 <512AEZ,510Y,512AHK,511AEZ>
3 87-B30-328-010 HEADPHONE,HP-M050 <514AHC,514AHR>
4 86-HC7-702-010 EARPHONE,HP-CR250N <513AEZ,513AK>
! 5 87-B30-283-010 AC ADAPTOR,AC-D603ENC <511AEZ,512AEZ,513AEZ>
! 5 87-B30-284-010 AC ADAPTOR,AC-D603KNC <513AK,512AHK>
! 5 87-B30-285-010 AC ADAPTOR,AC-D603HRNC <514AHR>
! 5 87-B30-286-010 AC ADAPTOR,AC-D603HCNC <514AHC>
! 6 87-A91-017-010 PLUG,CONVERSION JT-0 <514AHR>
28
211, IKENOHATA 1CHOME, TAITO-KU, TOKYO 110, JAPAN TEL:03 (3827) 3111
9920588 9630472 0251431 Printed in Singapore