Text preview for : FAX C - KM2530_3530 - U Error Codes.pdf part of Kyocera FAX C - KM2530 3530 - U Error Codes Kyocera Copiers KM2530_3530 FAX C - KM2530_3530 - U Error Codes.pdf
Back to : FAX C - KM2530_3530 - U | Home
3CM
(2-7) U017XX error code table: V.34 transmission
Error code Description
U01700 A communication error occurred in phase 2 (line probing).
U01720 A communication error occurred in phase 4 (modem parameter exchange).
U01721 Operation was interrupted due to the absence of a common communication speed between
units.
U01700: A communication error that occurs at the transmitting unit in the period after transmission of INFO0 before
entering phase 3 (primary channel equivalent device training). For example, INFO0/A/Abar (B/Bbar, for polling
transmission)/INFOh was not detected.
U01720: A communication error that occurs at the transmitting unit in the period after initiating the control channel before
entering the T.30 process. For example, PPh/ALT/MPh/E was not detected.
U01721: In the absence of a common communication speed between units (including when an impossible combination of
communication speed and symbol speed occurs) after MPh exchange; 1) a DCN signal was received from the
destination unit, and the line was cut; or 2) a DIS (NSF, CSI) signal was received from the destination unit and,
in response to the signal, the unit transmitted a DCN signal, and the line was cut.
(2-8) U018XX error code table: V.34 reception
Error code Description
U01800 A communication error occurred in phase 2 (line probing).
U01810 A communication error occurred in phase 3 (primary channel equivalent device training).
U01820 A communication error occurred in phase 4 (modem parameter exchange).
U01821 Operation was interrupted due to the absence of a common communication speed between
units.
U01800: A communication error that occurs at the receiver unit in the period after transmission of INFO0 before entering
phase 3 (primary channel equivalent device training). For example, INFO0/B/Bbar (A/Abar, for polling
reception)/probing tone was not detected.
U01810: A communication error that occurs at the receiver unit in phase 3 (primary channel equivalent device training).
For example, S/Sbar/PP/TRN was not detected.
U01820: A communication error that occurs at the receiver unit in the period after initiating the control channel before
entering the T.30 process. For example, PPh/ALT/MPh/E was not detected.
U01821: In the absence of a common communication speed between units (including when an impossible combination of
communication speed and symbol speed occurs) after MPh exchange, a DCN signal was transmitted to the
destination unit and the line was cut.
(2-9) U044XX error code table: Encrypted transmission
Error code Description
U04400 Encrypted transmission was interrupted because encryption keys did not agree.
U04401 Calling failed during encrypted transmission because the encryption key was not registered.
1-4-10
3CM
Error code Description
U01191 Communication was interrupted because an error occurred during an image data reception
sequence in the V.34 mode.
U01199 A DIS signal with different FIF was received after transmission of a DIS signal.
1-4-9
3CM
(2-6) U011XX error code table: G3 reception
Error code Description
U01100 Function of the unit differs from that indicated by a DCS signal.
U01101 Function of the unit (excl. communication mode select) differs from that indicated by an NSS
signal.
U01102 A DTC (NSC) signal was received when no transmission data was in the unit.
U01110 No response after transmission of a DIS signal.
U01111 No response after transmission of a DTC (NSC) signal.
U01112 No training reception after reception of a DCS or NSS signal.
U01113 No response after transmission of an FTT signal.
U01114 No message reception after transmission of a CFR signal.
U01115 No message reception after transmission of an MCF signal.
U01116 No message reception after transmission of a PPR signal.
U01117 No message reception after transmission of a CTR signal.
U01118 No message reception after transmission of an ERR signal.
U01119 No further signals were received after reception of a message.
U01120 No response after transmission of an MCF signal.
U01121 No response after transmission of an RTP signal.
U01122 No response after transmission of an RTN signal.
U01123 No response after transmission of a PIP signal.
U01124 No response after transmission of a PIN signal.
U01125 No response after transmission of a CNS signal (between units of our make).
U01126 No response after transmission of a PPR signal (ECM).
U01127 No response after transmission of an ERR signal (ECM).
U01128 No response after transmission of an RNR signal (ECM).
U01129 No response after transmission of an SPA signal (short protocol).
U01140 A DCN signal was received after transmission of a DIS signal.
U01141 A DCN signal was received after transmission of a DTC signal.
U01142 A DCN signal was received after transmission of a DCS or NSS signal.
U01143 A DCN signal was received after transmission of an FTT signal.
U01144 A DCN signal was received after transmission of a CFR signal.
U01145 A DCN signal was received after reception of a message.
U01146 A DCN signal was received after transmission of an MCF signal (interoffice communication after
reception of an MPS, EOM signal or confidential interoffice communication).
U01147 A DCN signal was received after transmission of an RTP signal.
U01148 A DCN signal was received after transmission of an RTN signal.
U01149 A DCN signal was received after transmission of a PIP signal.
U01150 A DCN signal was received after transmission of a PIN signal.
U01151 A DCN signal was received after transmission of a PPR signal (ECM).
U01152 A DCN signal was received after transmission of a CTR signal (ECM).
U01153 A DCN signal was received after transmission of an ERR signal (ECM).
U01154 A DCN signal was received after transmission of an RNR signal (ECM).
U01155 A DCN signal was received after transmission of an SPA signal (short protocol).
U01160 During message reception, transmission time exceeded the maximum transmission time per line.
U01161 Number of error lines exceeded limits during message reception.
U01162 A break in loop current was detected during message reception.
U01163 Polarity reversal was detected during message reception.
U01164 One page length exceeded the specified length during message reception.
U01170 A decoding error occurred during MMR message reception.
U01172 During reverse polling in V.34 mode at the transmitting unit, a JM signal was not detected after
transmission of a CM signal when receiving after transmission.
1-4-8
3CM
Error code Description
U01045 A DCN or other inappropriate signal was received after transmission of an MPS signal.
U01046 A DCN or other inappropriate signal was received after transmission of an EOM signal.
U01047 A DCN or other inappropriate signal was received after transmission of an EOP signal.
U01048 A DCN signal was received after transmission of a PRI-EOP signal.
U01049 A DCN signal was received after transmission of a CNC signal (between units of our make).
U01050 A DCN signal was received after transmission of a CTC signal (ECM).
U01051 A DCN signal was received after transmission of an EOR.Q signal (ECM).
U01052 A DCN signal was received after transmission of an RR signal (ECM).
U01053 A DCN signal was received after transmission of a PPS.NULL signal (ECM).
U01054 A DCN signal was received after transmission of a PPS.MPS signal (ECM).
U01055 A DCN signal was received after transmission of a PPS.EOM signal (ECM).
U01056 A DCN signal was received after transmission of a PPS.EOP signal (ECM).
U01057 A DCN signal was received after transmission of a PPS.PRI-EOP signal (ECM).
U01070 Polarity reversal was detected during handshake.
U01071 Polarity reversal was detected during message transmission.
U01072 A break in loop current was detected during transmission.
U01073 During reverse polling in V.34 mode at the receiver unit, a CM signal was not detected when
transmitting after reception.
U01080 A PIP signal was received after transmission of a PPS.NULL signal.
U01091 During transmission in V.34 mode, communication was interrupted because a PPR signal was
received over 10 times even after reducing the communication speed to the minimum with the
symbol speed maintained at the level of connection.
U01092 During transmission in V.34 mode, communication was interrupted because of an impossible
combination of the symbol speed and communication speed.
1-4-7
3CM
(2-5) U010XX errror code table: G3 transmission
Error code Description
U01000 An FTT signal was received for a set number of times after TCF signal transmission at 2400 bps.
Or, an RTN signal was received in response to a Q signal (excluding EOP) after transmission at
2400 bps.
U01001 Function of the unit differs from that indicated by a DIS signal.
U01010 No relevant signal was received after transmission of a DNL (MPS or EOM) signal, and the
preset number of command retransfers was exceeded (between units of our make).
U01011 No relevant signal was received after transmission of a DCS, TCF signal, and the preset number
of command retransfers was exceeded.
U01012 No relevant signal was received after transmission of an NSS1, NSS2 (TCF) signal, and the
preset number of command retransfers was exceeded (between units of our make).
U01013 No relevant signal was received after transmission of an NSS3, TCF signal, and the preset
number of command retransfers was exceeded (between units of our make).
U01014 No relevant signal was received after transmission of an MPS signal, and the preset number of
command retransfers was exceeded.
U01015 No relevant signal was received after transmission of an EOM signal, and the preset number of
command retransfers was exceeded.
U01016 An MCF signal was received but no DIS signal was received after transmission of an EOM
signal, and T1 timeout was detected.
U01017 No relevant signal was received after transmission of an EOP signal, and the preset number of
command retransfers was exceeded.
U01018 No relevant signal was received after transmission of a PRI-EOP signal, and the preset number
of command retransfers was exceeded.
U01019 No relevant signal was received after transmission of a CNC signal, and the preset number of
command retransfers was exceeded (between units of our make).
U01020 No relevant signal was received after transmission of a CTC signal, and the preset number of
command retransfers was exceeded (ECM).
U01021 No relevant signal was received after transmission of an EOR.Q signal, and the preset number
of command retransfers was exceeded (ECM).
U01022 No relevant signal was received after transmission of an RR signal, and the preset number of
command retransfers was exceeded (ECM).
U01023 No relevant signal was received after transmission of a PSS.NULL signal, and the preset number
of command retransfers was exceeded (ECM).
U01024 No relevant signal was received after transmission of a PSS.MPS signal, and the preset number
of command retransfers was exceeded (ECM).
U01025 No relevant signal was received after transmission of a PPS.EOM signal, and the preset number
of command retransfers was exceeded (ECM).
U01026 No relevant signal was received after transmission of a PPS.EOP signal, and the preset number
of command retransfers was exceeded (ECM).
U01027 No relevant signal was received after transmission of a PPS.PRI-EOP signal, and the preset
number of command retransfers was exceeded (ECM).
U01028 T5 timeout was detected during ECM transmission (ECM).
U01040 A DCN or other inappropriate signal was received during standby for DIS signal reception.
U01041 A DCN signal was received after transmission of a DNL (MPS or EOM) signal (between units of
our make).
U01042 A DCN signal was received after transmission of a DCS, TCF signal.
U01043 A DCN signal was received after transmission of an NSS1, NSS2 (TCF) signal (between units of
our make).
U01044 A DCN signal was received after transmission of an NSS3, TCF signal (between units of our
make).
1-4-6
3CM
(2-3) U008XX error code table: Page transmission error
Error code Description
U00800 A page transmission error occurred because of reception of a RTN or PIN signal.
U00810 A page transmission error reoccurred after retry of transmission in the ECM mode.
(2-4) U009XX error code table: Page reception error
Error code Description
U00900 An RTN or PIN signal was transmitted because of a page reception error.
U00910 A page reception error remained after retry of transmission in the ECM mode.
1-4-5
3CM
(2-1) U004XX error code table: interrupted phase B
Error code Description
U00420 A relay request was received from the host center but interrupted because of a mismatch in
permit ID or telephone number.
U00421 F-code based relay reception was interrupted because of a mismatch in the specified F-code
relay box number.
U00430 A polling request was received but interrupted because of a mismatch in permit ID in the
transmitting unit. Or, F-code based bulletin board transmission request was received but
interrupted because of a mismatch in permit ID in the transmitting unit.
U00431 An F-code based bulletin board transmission was interrupted because the specified F-code
confidential box was not registered.
U00432 An F-code based bulletin board transmission was interrupted because of a mismatch in F-code
confidential box numbers.
U00433 F-code based bulletin board transmission request was received but data was not present in the
F-code confidential box.
U00435 F-code based bulletin board transmission request was received but interrupted because the
specified F-code confidential box was being accessed.
U00440 F-code based confidential reception or F-code based relay reception was interrupted because
the specified F-code box was not registered.
U00450 The destination unit in password check transmission mode interrupted transmission because of a
mismatch in permit ID.
U00460 Encrypted reception was interrupted because the specified encryption box number was not
registered.
U00462 Encrypted reception was interrupted because the encryption key for the specified encryption box
was not registered.
(2-2) U006XX error code table: Problems with the unit
Error code Description
U00600 The SRDF cover is open.
U00601 Document jam or the document length exceeds the maximum.
U00602 Image scanning section problem.
U00603 No document feed.
U00604 Document length exceeded the limit of the bitmap memory capacity.
U00610 Recording section cover is open.
U00655 CTS was not activated after RTS due to a modem error.
U00656 Data was not transmitted after CTS was activated due to a modem error.
U00670 Power was cut off during communication.
U00677 There was no file to transmit in the memory transmission mode.
U00690 System error.
1-4-4
3CM
Error code Description
U04200 In encrypted transmission, the specified encryption box was not registered in the destination unit.
U04300 Encrypted transmission failed because the destination unit had no encrypted communication
capability.
U044XX Communication was interrupted because of an encryption key error during encrypted
transmission (refer to page 1-4-10 "U044XX error code table").
U04500 Encrypted reception was interrupted because of a mismatch in encryption keys.
U05100 Password check transmission was interrupted because the permit ID did not agree.
U05200 Password check reception was interrupted because the permit ID did not agree.
U05300 Destination unit in password check reception mode did not receive data because the permit ID
did not agree.
U09000 G3 communication was attempted but failed because the destination unit was a G2 machine.
U12000 In F-code based relay reception, memory overflowed.
U14000 In F-code based confidential reception, memory overflowed.
U14100 In interoffice F-code based transmission, memory overflowed in the destination unit.
U19000 Memory overflowed during memory reception.
U19100 Memory overflowed in the destination unit during transmission.
U19200 Memory transmission failed because a decoding error occurred.
U19300 Transmission failed because an error occurred during JBIG encoding.
U19400 Reception failed because an error occurred during JBIG decoding.
1-4-3
3CM
(2) Table of general classification
Error code Description
U00000 No response or busy after the set number of redials.
U00100 Transmission was interrupted by a press of the stop/clear key.
U00200 Reception was interrupted by a press of the stop/clear key.
U00300 Recording paper on the destination unit has run out during transmission.
U004XX A connection was made but interrupted during handshake with the receiver unit (refer to page 1-
4-4 "U004XX error code table").
U00500 Multiple communication was interrupted and call was not made on destination units after
interruption.
U006XX Communication was interrupted because of a machine problem (refer to page 1-4-4 "U006XX
error code table").
U00700 Communication was interrupted because of a problem in the destination unit.
U008XX A page transmission error occurred in G3 mode (refer to page 1-4-5 "U008XX error code table").
U009XX A page reception error occurred in G3 mode (refer to page 1-4-5 "U009XX error code table").
U010XX Transmission in G3 mode was interrupted by a signal error (refer to page 1-4-6 "U010XX error
code table").
U011XX Reception in G3 mode was interrupted by a signal error (refer to page 1-4-8 "U011XX error code
table").
U012XX Not used.
U013XX Not used.
U01400 An invalid one-touch key was specified during communication.
U01500 A communication error occurred when calling in V.8 mode.
U01600 A communication error occurred when called in V.8 mode.
U017XX A communication error occurred before starting T.30 protocol during transmission in V.34 mode
(refer to page 1-4-10 "U017XX error code table").
U018XX A communication error occurred before starting T.30 protocol during reception in V.34 mode
(refer to page 1-4-10 "U018XX error code table").
U02200 F-code based relay broadcast transmission failed because the data registered in the F-code
relay box was deleted.
U02400 An interoffice F-code based relay transmission was interrupted because of a mismatch in the
specified relay box number.
U03000 No document was present in the destination unit when polling reception started.
U03200 In interoffice F-code based bulletin board reception, data was not stored in the box specified by
the destination unit.
U03300 In polling reception from a unit of our make, operation was interrupted due to a mismatch in
permit ID or telephone number. Or, in interoffice F-code based bulletin board reception,
operation was interrupted due to a mismatch in permit ID or telephone number.
U03400 Polling reception was interrupted because of a mismatch in individual numbers (destination unit
is either of our make or by another manufacturer).
U03500 In interoffice F-code based bulletin board reception, the specified F-code confidential box
number was not registered in the destination unit.
U03600 An interoffice F-code based bulletin board reception was interrupted because of a mismatch in
the specified F-code confidential box number.
U03700 Interoffice F-code based bulletin board reception failed because the destination unit had no F-
code based bulletin board transmission capability, or data was not stored in any F-code
confidential box in the destination unit.
U04000 In interoffice F-code based transmission mode, the specified F-code box number was not
registered in the destination unit.
U04100 F-code based transmission failed because the destination unit had no F-code based reception
capability.
1-4-2
3CM
1-4-1 Error codes
(1) Error code
Error codes are listed on the communication reports, activity report, etc. The codes consist of an error code indication "U"
followed by a 5-digit number. (Error codes for V34 communication errors start with an "E" indication, followed by five
digits.)
The upper three of the five digits indicate general classification of the error and its cause, while the lower two indicate the
detailed classification. Items for which detailed classification is not necessary have "00" as the last two digits.
Error code
UXXXXX
Detailed classification of error code
General classification of error code
Error code indication
1-4-1