Text preview for : Setup Tool (0.1.08) AVR-2807.PDF part of DENON Setup Tool (0.1.08) AVR-2807 DENON AV Surround Receiver AV Surround Receiver Denon - AVR-2807 & 987 Setup Tool (0.1.08) AVR-2807.PDF
Back to : Setup Tool (0.1.08) AVR- | Home
AVR-2807
Setup Tool (0.1.08)
Manual
DENON
Apr.20.2006
1/7
Table of contents
1 Instruction Manual
1.1 Stand alone mode
1.2 Communication mode
1.2.1 Top Menu & System Setup
1.2.2 Surround Parameter
1.2.3 Load/Save Full Setup
1) Minimum hardware and software requirements:
Type PC/AT compatible
CPU Intel Pentium/Celeron500MHz or faster
RAM 128MB or more
Free hard disc space 25MB or more
OS Windows XP Home Edition / Professional SP2 or more
Display resolution Super VGA (800x600) or more.
Port. RS-232C
Communication speed 115,200bps
2) Installation procedure
a. Execute AVR-2807SetupTool.exe.(Install the AVR-2807 Setup Tool and necessary files)
b. Execute AVR-2807 Setup Tool.
Ex. [Start] of Windows - [Program] - [AVR-2807 Setup Tool]
2/7
1 Instruction
1.1 Stand alone mode
This mode enables the setting data concerning the product to be made with PC
beforehand.
(1) Select "Stand alone" by the connection port setting.
(2) Select "Model name" by the Model setting.
(3) Select [System Setup] menu and set parameters.
(1) (2)
Load Param. Button : The setup parameter can be loaded from the file in PC.
Save Param. Button : Edited setup parameter can be saved to the file.
[ETC Setup]-[Surrond Parameter] : The surround mode and the parameter can be set to
each input function.(see page6)
Hidden Setup Menu : When this item is checked,system setup can not operate.
Protect Auto Setup Parameter : When this item checked,auto setup parameter is
protected.
NOTE
*[Real Time Control] cannot be used.
*[Load/Save Full Setup] of [ETC Setup] cannot be used.
*Channel level setting of [Speaker Setup (2)] and [Surrond Parameter] may be
over write the results of Autosetup.
3/7
1.2 Communication mode
1.2.1 Top Menu & System Setup
This mode enables the control of the product from the PC via RC-232C cable.
(1) Select "COM 1-4" by the connection port setting.
(2) "Model name" is set automatically.
Get the all Setting Data from AVR-2807 and copy to the Edit Data Button
: All setup parameter of [System Setup] can be loaded from the AVR2807 connected
via RC-232C, and then those parametrs copy to the edit data.
Send the all Setting Data to AVR-2807 Button
: All edited setup parameter of [System Setup] can be set to the AVR2807 connected
via RC-232C.
NOTE
*Until getting the setting data from the AVR-2807, Channel level setting of
[Speaker Setup (2)] overwrite the results of auto setup, so please execute
this
setting carefully.
4/7
(3) Select [System Setup] menu and set parameters.
[Setting Category]
Edit : now editting. ,
AVR/AVC : setting data of the AVR2807 connected via RC-232C.(Not edit)
Default : Default setting. (Not edit)
Copy AVR-2807 to Edit Data Button
: Setup parameter on selected page can be loaded from the AVR2807 connected
via RC-232C, and then those parametrs copy to the edit data.
Copy Default to Edit Data Button
: Default setting data can be copied to the edit data of selected page.
Send the setup data on this page Button
: Edited setup parameter on selected page can be set to the AVR2807 connected
via RC-232C.
5/7
1.2.2 Surround Parameter of ETC Setup
Load the Surround Parameter from File Button
: The surround parameter can be loaded from the file in PC.
Save the Surround Parameter to File Button
: The edited surround parameter can be saved to the file.
Set the Surround Parameter to AVR-2807 Button
: Edited surround parameter can be set to the AVR2807 connected via RC-232C.
*NOTE
Channel level setting overwrite the results of auto setup, so please execute this
setting carefully.
6/7
1.2.3 Load/Save Full Setup of ETC Setup
Get Full Setup Data from AVR-2807 (and File Save) Button
: All backup data (except roomEQ data) can be loaded from the AVR2807 connected
via RC-232C, and then those data can be saved to the PC.
Set Full Setup Data to AVR-2807 Button
: All backup data (except roomEQ data) can be set to the AVR2807 connected via
RC-232C.
NOTE
RoomEQ data is not included in backup data, so please execute the Autosetup
individually after setting full setup data.
7/7