Text preview for : 1155035.PDF part of Minolta 1155035 Minolta Copiers Di620 1155035.PDF



Back to : 1155035.PDF | Home

MINOLTA CO., LTD., SERVICE ENGINEERING DIVISION
PAGE NO. : 1/2
SERVICE BULLETIN
PROBLEM FUNCTION SAFETY

SERVICEABILITY OTHERS

MODEL NAME : Di620 OTHERS PERFORMANCE CORRECTION

SAFETY REGULATION OTHERS
MODEL CODE : 1155
NO. : 035
DATE : 990602
SUBJECT : CHANGE OF CABLE MOUNTING BRACKET


PROBLEM: The Cable Mounting Bracket (02) installed on the Scanner Assy (01) can at times be broken.
CAUSE: When the Scanner is moved, the Scanner Drive Cable interferes with the Cable Mounting Bracket (02),
causing the Cable Mounting Bracket (02) to wear.
SOLUTION: The following changes have been made to increase the strength of the Cable Mounting Bracket (02).
-The shape of the Cable Mounting Bracket (02) has been changed.
-A Screw hole has been made in the Scanner Assy (01).
-As a result of the change made in the shape of the Cable Mounting Bracket (02), a tapping screw
(9735-0306-13) has been added.




02


01



View from Arrow

01 01




02 02




Hole Added


Scanner Drive Cable Scanner Drive Cable
9735-0306-13
(1 piece added)




PCJ-242iA PRINTED IN JAPAN
S/B NO. : 1155-035 PAGE NO. : 2/2




NOTE: The new Bracket (02) must be installed in premodification machines with the new 1st Slider (01).


BEFORE MODI. AFTER MODI. QTY
NO. F-IND PART NO. PART NO. F-IND PART NAME I SE/NO. AREA


01 12-17AA 1155-0152-01 1155-0152-02 12-17AB 1ST SLIDER 1 1 Y 009409 0000

02 12-10AA 1155-1411-02 1155-1411-03 12-10AB BRACKET 1 1 S 009409 0000




PCJ-247iA PRINTED IN JAPAN