Text preview for : 49208-ww-1.pdf part of MAKITA 49208-ww-1 MAKITA 49208-ww-1.pdf
Back to : 49208-ww-1.pdf | Home
T ECHNICAL INFORMATION 49208
Subject Change on blade case and rubber ring
For Models 5903R and 5903
Description 1. Two holes will be made in the blade case. As shown in the figure below, the strain relief securing
screws can be loosened by inserting a screwdriver through the holes in the blade case. It is not
necessary to remove the blade case from the motor housing when removing the strain relief.
Strain relief
Blade case Motor housing
Screwdriver
Holes (added)
Rubber ring
2. To increase the durability of the rubber ring which supports the safety cover (safety guard), the rubber ring 10 will be
replaced by a rubber ring 8. An axis and protector (rib) for the rubber ring 8 will be added to the blade case. The pan head
screw M8 (rubber ring securing screw) will be discontinued.
Current New
Protector (rib)
Pan head screw M8 Blade case Blade case
Rubber ring 10 Axis Rubber ring 8
Rubber ring 8
Note
Install the rubber ring 8 so that its top surface is below that of the protector (rib).
Interchangeability(I/C)
Item No. Current part Q'ty I/C New part Q'ty Note
44 Blade case complete Blade case complete
1 No 1
152452-2 152495-4
Rubber ring 10 Rubber ring 8 No Interchangeable
45 1 No 1
262060-2 262007-6 as a set
46 Pan head screw M8
265032-6 1
Implementation
From May, 1995