Text preview for : 6402-TE.pdf part of MAKITA 6402-TE MAKITA 6402-TE.pdf
Back to : 6402-TE.pdf | Home
T ECHNICAL INFORMATION
Models No. 6402
New Tool
Description MAKITA 10 mm Drill
CONCEPTION AND MAIN APPLICATIONS
This machine is the more high-graded model
of the 6510LVR. 264
By holding the motor in some between this 70
model and the 6820V, the power has been
upgraded. For the drill chuck, the outer
178
diameter has been enlarged than that of 6510LVR
to increase the gripping force and to make
the high grade feeling.
Specifications
Consumed Rated
Voltage(V) Current(A) Frequency(Hz) Max. output(W)
power(W) output(W)
100 6.0 50-60 570 280 460
115 5.2 50-60 570 280 460
200 3.0 50-60 570 280 460
220 2.7 50-60 570 280 460
230 2.6 50-60 570 280 460
240 2.5 50-60 570 280 460
No load speed(R.P.M.) 0-1,200rpm
Chuck capacity(mm) 0.6-10mm
Capacity(mm) for steel 10mm
for wood 21mm
Net weight(kg) 1.7kg
Cord length(m) 2.5m
Standard equipment
Chuck key 10
Features and benefits
1. With the powerful motor(6510LVR:330W) of 570W, the high working efficiency can be achieved without
stressing the motor.
2. Low noise provides the comfortable operation.
3. With the non-step variable speed switch, positioning for drilling can be easily done.
4. The built-in reversing change function enables the drill to be easily detached.
5. The gripping force has been increased with the large outer diameter "43" (6510LVR :38) of the large model
drill chuck.
The standard equipment for the tools shown may differ form country to country.
Circuit drawing
a. Domestic & general specifications
* The terminal board is used for export to America.
Violet
5 6 White
Terminal board
3 4
1 2
Reversing change switch
Orange
color
Cab tire cord
Main
Black Auto winding field
switch
Capasitor
b. For the countries where the interference protection is required (for West Germany, Austria, France, Holland, England etc.)
Yellow Auto winding field
5 6
Black
3 4
1 2 Orange
color
Reversing change
switch
Cab tire cord
White
Main
Black
switch
Violet
Capasitor
1. Connect the reversing change switch as shown
on the right figure. Although the terminal numbers
are not displayed, they are specified as shown on (6)
the figure for the convenience. Normal turn (5)
(3)
(1)
Reverse turn
Motor housing
2. Depending on the destinations, the condenser is not used or the three legs are used in some areas.