Text preview for : 62170-WW-1.pdf part of MAKITA 62170-WW-1 MAKITA 62170-WW-1.pdf
Back to : 62170-WW-1.pdf | Home
T ECHNICAL INFORMATION
Subject Change of Brush Holders
62170
For Models GD0800C, GD0810C
Country U.S.A., European countries, Middle-East countries, African countries, Asian countries, Australia,
New Zealand
Description For standardization, Brush Holders have been changed. The shape remains unchanged. The only
difference between the new Brush Holders and the current ones is the spring pressure of the spiral
spring.
Tapping Screw PT3x10 Brush Holder
(643762-3 or 643760-7)
Brush Holder
Carbon Brush
Rear Cover
Motor Housing
Spiral Spring
Brush Holder
(643761-5 or 643974-8) Current New
Spring pressure of 6.5N/cm 2 4.3N/cm2
Controller the Spiral Springs
Tapping Screw 4x18
Interchangeability(I/C)
Item No. Current part Q'ty I/C New part Q'ty Note
Brush Holder Brush Holder
040 1 Yes 1 European countries (except U.K. 110V),
643762-3 643760-7
South Africa, China, Korea, Australia,
Brush Holder Brush Holder
055 1 Yes 1 New Zealand,
643761-5 643974-8
Brush Holder Brush Holder U.S.A., U.K. 110V, Middle-East countries,
040, 055 2 Yes 2
643762-3 643760-7 African countries (except for South Africa),
Asian countries(except for China and Korea),
Implementation
GD0800C : From serial No.4231E (Sep., 2000)
GD0810C : From serial No.3488E (Sep., 2000)