Text preview for : SB-2LZ-0008-C250.pdf part of Kyocera SB-2LZ-0008-C250 Kyocera Printer FS-1030MFP-1035MFP-1130-1135 SERVICEBULLETIN SB-2LZ-0008-C250.pdf
Back to : SB-2LZ-0008-C250.pdf | Home
(Page.1/2)
Service Bulletin Ref. No. 2LZ-0008 (C250)
September 12, 2012
Subject Supply of the Rubber Foot
FS-1100, FS-1300D, FS-1350DN, FS-1120D, FS-1320D,
FS-1370DN, FS-1110, FS-1028MFP, FS-1128MFP,
Model l:
FS-1024MFP, FS-1124MFP, FS-1030MFP, FS-1130MFP,
FS-1035MFP, FS-1135MFP
Topic
Due to the unevenness of the desk/pedestal where the machine is set up, drawing out or inserting the cassette
might become hard due if the bottom of the cassette contacts the desk, etc. which might damage the cassette.
Therefore, the rubber foot was newly set up as service part in order to increase the clearance between the
machine bottom and the desk, etc. by approx. 3 mm.
1. Please clean the affixing side with alcohol beforehand.
2. Please affix the rubber foot on the four areas where indicated with the yellow frame in the photos below.
3. Please remove the rubber foot when attaching the PF-100/PF-120.
View from the bottom side
12.7mm
7mm 12.7mm
5.8mm
Q'ty Com pati-
No. Old Part New Part Description bi lity Remarks
No. No.
Old New Old New
302LZ94190
1 ------------ PARTS FOOT SP - 1 - O
2LZ94190
(Note) The PARTS FOOT SP (No.1) above includes four pieces of the rubber foot.
KYOCERA Document Solutions Europe
Technical Customer Service Division (TCSD)
(Page.2/2)
Service Bulletin Ref. No. 2LZ-0008 (C250)
September 12, 2012
KMC's Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please order the above if necessary.
Serial Nos. of the Affected Machines:
This is part number information. The serial number information will not be available.
KYOCERA Document Solutions Europe
Technical Customer Service Division (TCSD)