Text preview for : 1050D-TE.pdf part of MAKITA 1050D-TE MAKITA 1050D-TE.pdf
Back to : 1050D-TE.pdf | Home
T ECHNICAL INFORMATION New Tool
For Models 1050D
Description 12V Cordless
CONCEPTION AND MAIN APPLICATIONS
152(6")
118
(4-
5 /8"
Battery
)
Fast charger Plastic case
1050DA 1222 None None ")
1-9/16
1050DRA 1222 DC1409 Equipped 293(1
1050DWA 1222 DC1411 Equipped
Specifications
No load speed 9,000R/min
Driving shank (LxWxH) Plane blade width 50mm [1-31/32"]
Max. planing width 50mm[1-31/32"]
Max. planing depth 0.5mm[0.02"]
Shiplapping Max. depth 15mm[9/16"]
Standard equipment
Dust bag assembly...1 pc.
Guide Rule...1 pc.
Battery cover...1pc.
Hex. Wrench 4 ...1pc.
Set plate...1 pc.
Optional accesories
Plane blade
Battery 1200, Battery 1202, Battery 1222, Battery 1220(for export only), Battery 1233,
Battery 1202A, Fast charger DC1411, Fast charger DC1409(for export only), Fast
charger DC1809(for domestic only), Charger DC1801(for export only), Fast charger
DC1412(for North America and Europe only)
Light weight 2.1kg Workload per one full charge with 0.5mm
Blade width 50mm #1900B: 2.5kg 40m for 30mm width wood planing depth
50m or over is possible for 30mm width
medium soft wood and for 2x4 lumber.
Shiplapping depth: 15mm
Safety Lock-off button
Disposable mini planer blades
can be switched by
either right or left hand.
Electric brake system
Battery 1222
(2.0Ah) can be replaced
Dust bag (Standard accessory)
easily with a push-button.
Enlighten your cleaning job
after work. For use of the existing battery,
This can be mount a set plate that is a
replaced with dust catcher(#406). standard option parts.
Hex. Wrench
(for setting a plane blade)
Low noise 72dB can be stored inside.
Guide Rule
Max. planing depth: 0.5mm (standard accessory)
Depth can be selected with can be mounted.
0.1mm each by a click.
Chamfering function
V groove on the front base
enables 0 to 5.6mm chamfering.
Repair
(1) Mount bearing retainer 6-18 to drum holder Bearing retainer 6-18
together with ball bearing so that the convex
part of the retainer should face ball bearing.
Convex section
Ball bearing
Drum holder
(2) Tighten pulley 8-30 securely by using a wrench Bracket Drum
17 or adjustable wrench, etc. as the motor has
a brake function. (Note) Tightening torque is Tighten here.
around 2.0Nm or over.
Pulley 8-30
(3) Insert compression springs 3 into drum holes
before mounting a drum plate to the drum. For Groove
insertion, thread cross-slot pan-head screws Drum plate
(M4x10) about one turn and attach the drum
plate so that the screw heads will set into the Compression spring 3
grooves on the drum plate.
Drum
Cross-slot pan-head
screw M4x10
Pan-head screw M3x8
(4) Press pulley (7.5 to 13.5) into DC motor with
Motor holder DC motor
the dimension as shown on the right figure.
Pulley 7.5-13.5
85.0 +0.2/0
Wiring diagram
Red
Red circle mark
White (+)
(+)
Black
(-) Black
Black
(-)
Connection diagram
Arrange lead wires in the main frame as shown below.
Fix lead wires
with lead holders.
Main frame
Fix lead wires with
lead holders.
Varnished Tetoron tube
Treat connector end as shown in the figure.