Text preview for : 2K3-015.pdf part of Kyocera 2K3-015 Kyocera Printer FS-6025-6030MFP SERVICEBULLETINS 2K3-015.pdf
Back to : 2K3-015.pdf | Home
Service Bulletin
SB Number: SB 2K3-015 Creation Date: 16/02/2012
Subject: Difficult to pull the Paper cassette outside the Main body
Model: FS-6025MFP/6025MFP(B)/6030MFP, FS-C8020MFP/8025MFP
Phenomenon Under the below mentioned conditions, it may be difficult to pull the Paper cassette outside the
Main body.
1. A3/11X17 sized paper is fully loaded in the standard Paper cassette.
2. A3X11X17 sized paper load is applied for a prolonged time due to low copy volume.
3. The Cassette heater is turned ON.
Cause The Boss of the paper width cursor support point at the back of the Main body, contacts the
Base edge material. This is due to aging of the material.
Solution To prevent contact between the Boss and the Base edge, a Guide has been added to the back
of the Paper cassette.
Boss and Base edge Contact with the base
protection material edge protection material
Boss at the back of the Paper cassette Pull direction of the Paper Pull direction of the Paper
(Paper width cursor support point) cassette cassette
Parts
No. Old Parts New Parts Description Q'TY Interchange- Remarks
No. No. ability
Old New Old New
1 302K393170 302K393171 CT-475 1 1 X O *1
2K393170 2K393171
2 303NN93010 303NN93011 CT-476 1 1 X O *2
3NN93010 3NN93011
3 ---------- 302K394900 + PARTS GUIDE BOTTOM - 1 - O
2K394900 CASSETTE ASSY SP (Set of
the Guide/Screw/Leaflet)
Notes: *1. Main body standard Paper cassette and 1ste cassette of the PF.
*2. 2nd Paper cassette (Added for commonality with the standard Paper cassette and 1ste cassette of the PF)
KMIS Service Department, Kyocera Mita Europe Page 1 of 3 B432 / SB 2K3-015
Service Bulletin
Classification Entire stock rework X In-field modification by case No modification necessary
In-field modification at next visit
Field measure When the above mentioned phenomenon occurs, please add the Guide to the back of the Paper
cassette.
Serial numbers of affected machines
Type Serial number
FS-6025MFP/6025MFP(B)/6030MFP, FS-C8020MFP/8025MFP November 2011 production
Installing the Guide
A
Screw
A
1. Clean the surface below the position, where the
Guide (A) will be affixed with cleaning alcohol.
2. Peel off the release paper from the Guide (A). Align
the Guide to the Boss and hole for the Screw. Fix it
with the Screw. (Refer to the bundled leaflet on
page 3 for further details)
Guide at the Back of the Paper Paper cassette with the Guide
cassette installed, inside the Main body
KMIS Service Department, Kyocera Mita Europe Page 2 of 3 B432 / SB 2K3-015
Service Bulletin
A
B
1 2
3 5
A
B
4
A
2011.11
302K356850-01
KMIS Service Department, Kyocera Mita Europe Page 3 of 3 B432 / SB 2K3-015