Text preview for : AS-119.pdf part of Kyocera AS-119 Kyocera Printer _OPTIONS DF-600 SERVICEBULLETIN AS-119.pdf
Back to : AS-119.pdf | Home
1/4
Service Bulletin
SB Number: SB AS-119 Issue Date: 30/04/2003
Subject: Supply of `Special Tool, Stapler' for field service
Model: DF-600 / DF-610
DF-600: KM-4530 / 5530 * / 6330 * (* = with special adjustment only: see SB AS-116)
DF-610: KM-4530 / 5530 / 6330
Please be informed that a part number for the `SPECIAL TOOL, STAPLER' is available.
Please order the `SPECIAL TOOL, STAPLER' with below part number if required.
Purpose
The `SPECIAL TOOL, STAPLER' is a jig that is used when replacing a stapler unit or when a stapling
malfunction occurs. Please refer to page 2 and later of this service bulletin for more details.
`SPECIAL TOOL, STAPLER' (P/N: 3B868010)
Parts Table
Part No. Part No. Q'ty Interchange-
No. Description
OLD NEW old-new ability
1 --------- 3B868010 SPECIAL TOOL, STAPLER - 1 - O
KMIS Service Team, Kyocera Mita Europe 5490 / SB AS-119
3B8/9-2
(3) Adjusting the stapler unit mounting position
Perform this operation when replacing a stapler unit or when a stapling malfunction occurs.
* Since the front stapler and the rear stapler in the finisher have the same construction, only the procedure for the front
stapler is described below. Use similar procedure for adjusting the rear stapler.
Tool required for adjustment