Text preview for : TK-D240_V146_ECF4.zip part of Kenwood TK-D240 V146 ECF4 Kenwood Radios TK-D240_V146_ECF4.zip
Back to : TK-D240_V146_ECF4.zip | Home
***** NOTICE *****
This Firmware Updater runs on Windows Vista, Windows 7 , Windows 8 ,or Windows 8.1 , Windows 10
operating system only.
The .NET Framework 3.5 (includes .NET 2.0 and 3.0) must be installed to run this Firmware Updater.
--------------------------------------------------------------------------------
There is no need to put the TK-Dx40 Series into firmware programming mode to overwrite firmware using the
Firmware Updater. Simply turn on the TK-Dx40 Series and execute the programmer.
It may take 2 minute to update firmware. While writing firmware DO NOT OPERATE THE TARGET RADIO
- DO NOT PRESS PTT
- DO NOT TURN THE KNOBS OR PRESS ANY KEYS
Operating the radio may cause fatal corruption to the firmware programming area and also the MPU boot area.
If fatal corruption occurs, please send the radio to your closest Kenwood Authorized Repair Facility.
--------------------------------------------------------------------------------