Text preview for : Hitachi Deskstar 160 GB.PDF part of Hitachi Deskstar 160 GB Hitachi disk Hitachi Deskstar 160 GB.PDF
Back to : Hitachi Deskstar 160 GB.P | Home
Verkrijgbaar bij: Grafi-Call Computers BV. Leiden
Quick installation guide
Hitachi Deskstar T7K250
Ultra ATA/133 Hard disk drive
Models:
HDS722525DLAT80
HDS722516DLAT80
Quick installation procedure
System requirements for Ultra ATA/133
Note: Back up all data before installing drive!
If you do not have the components listed below, your
drive will function but at speeds lower than 133 MB/s. 1. Turn off the computer.
2. Unplug the computer
40-pin, 80-conductor cable
3. Remove the computer cover as instructed by the
A controller card or motherboard chipset with Ultra computer system manual.
ATA/133 capability 4. Discharge static electricity (see Handling pre-
cautions).
Ultra ATA/133 compatible BIOS or driver
5. Note the mounting position of existing drives and
cables. If you are replacing a drive or any cable,
remove it now.
Handling precautions 6. Remove the drive from the ESD bag.
7. Record the model, the part number, and the serial
Set the drive down gently to prevent damage from number of the drive for future reference.
impact or vibration. 8. Insert the required jumpers. Refer to the jumper
Do not open the ESD bag containing the drive until block diagram below.
needed.