Text preview for : SB-2K3-0010-B119.pdf part of Kyocera SB-2K3-0010-B119 Kyocera Printer FS-6025-6030MFP SERVICEBULLETINS SB-2K3-0010-B119.pdf



Back to : SB-2K3-0010-B119.pdf | Home

(Page.1/1)

Service Bulletin Ref. No. 2K3-0010 (B119)
[Service Information] May 7, 2011
Notes on Fitting the Upper Left Cover and the Rear Cover
Subject
(Blank Copy Output from the DP)
FS-6030MFP, FS-6025MFP, FS-6025MFP/B, FS-C8020MFP,
Model
FS-C8025MFP
Topic
In the Service Manual and during service training, it is requested to check if the optical lock lever is released when
fitting the upper left cover. Likewise, please check if the optical lock lever is released when fitting the rear
cover.

The optical lock lever may be unawarely pushed in by a rib on the rear cover when fitting it.
In this condition, the optical system is not able to move toward left side when attempting to copy using the DP since
the optical lock lever is locked (the lever is pushed in). This will cause abnormal images such as blank copy or
foggy background.




Upper left cover


Rear cover


A rib on the rear
cover may push
the lock lever.
Optical lock lever
(Locked state)

(Securely release it.)




KMC's Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please confirm that the optical lock lever is released when fitting the upper left cover and
the rear cover.
Serial Nos. of the Affected Machines: N.A.




KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)