Text preview for : SB-5H2-0001-B386.pdf part of Kyocera SB-5H2-0001-B386 Kyocera Printer FS-6970 ServiceBulletins SB-5H2-0001-B386.pdf
Back to : SB-5H2-0001-B386.pdf | Home
(Page.1/1)
Service Bulletin Ref. No. 5H2-0001 (B386)
[Service information] October 28, 2011
Measures against the Paper Jam on the Optional Paper
Subject
Feeder
Model PF-430
(Installation target modes of PF-430: FS-6950DN and FS-6970DN)
Topic
No-feed jam or accordion jam might occur due to a loose connector.
If a paper jam occurs, please check the motor connector and securely insert it if it is loose.
Removed cassette (right side)
Top cover
When removing the top cover, two
springs will be found at the both left and PF-430
right sides. Remove the top cover upright
while taking care not to lose them.
1) Pull out the cassette.
2) Unscrew four of the screws on the top
cover (marked with bold arrows in FIG2
FIG1).
3) Unlatch the both hooks inside (one
each on the right and left sides) where
Push the hook
the cassette was seated (FIG2).
to unlatch (same for
4) Remove the top cover.
the left side ).
FIG1
NG Loose OK
Correct connection
If the connector is loose or
disconnected, a jam may occur
KMC's Classification Entire Stock Rework In-Field modification at next visit
In-Field modification by case No modification necessary
Field Measure: Please check the motor connector if a paper jam occurs on the optional paper feeder.
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)