Text preview for : 7Disassembly.pdf part of NOKIA 7Disassembly NOKIA Mobile Phone 7190 7Disassembly.pdf



Back to : 7Disassembly.pdf | Home

Programmes After Market Services
NSB-5 Series Transceivers




Disassembly Instructions




Issue 1 03/01 Nokia Mobile Phones Ltd.
NSB-5
Disassembly Instructions PAMS Technical Documentation




1. Remove the Battery




2. Remove Dust Cap & Rubber Plugs




3. Remove the Screws (6x)




5. Pull out Antenna
note: snap fitting
4. Lift off B-Cover




Page 2 Nokia Mobile Phones Ltd. Issue 1 03/01
NSB-5
PAMS Technical Documentation Disassembly Instructions




6. Lift off the PCB


7. Remove the Slide Sensor Switch




8. Pull out the Slide until the End Stop




Issue 1 03/01 Nokia Mobile Phones Ltd. Page 3
NSB-5
Disassembly Instructions PAMS Technical Documentation




10. Use a pair of Tweezers to push
the Slide Stopper Spring in the
direction indicated.




11. Simultaneously with step 10:
Pull out the Slide past the
End Stop
! note: Pull out straight !




! DO NOThandle the Slide like this ! ALWAYS handle the slide like this.
The metal slide is very easily bent when it is not protected by the phone. Avoid bending
of the plungers at all times.




Page 4 Nokia Mobile Phones Ltd. Issue 1 03/01
NSB-5
PAMS Technical Documentation Disassembly Instructions




12. Bend open one side of
the (plastic) Slide Cover
and take out the Metal 2 1
Slide.




! DO NOT ! ALWAYS
Hold the Metal Slide like this. Handle the Metal Slide like this.
The Metal Slide is bent very eas- The Metal Slide can be held by the Targa Bow or by one of
ily when not protected by the the Plungers.
phone. Avoid bending of the
Plungers at all times.



Fitting a Metal Slide onto a Slide Cover:




click




middle snap


Push the Metal Slide onto Push down the other side, Push the Metal Slide onto
the snap on one side of but do not hit the middle the snap on the opposite
the Slide Cover. snap. side. A click should be
noticed.




Issue 1 03/01 Nokia Mobile Phones Ltd. Page 5
NSB-5
Disassembly Instructions PAMS Technical Documentation




13. Remove the Display Assembly




14. Remove the Keymat Module




15. Remove the Speaker and the Roller Key




Page 6 Nokia Mobile Phones Ltd. Issue 1 03/01