Text preview for : ServEqui.pdf part of Ericsson ServEqui . Rare and Ancient Equipment Ericsson Mobile Phones ERICSSON EH238 ServEqui.pdf
Back to : ServEqui.pdf | Home
Service Equipment
Ericsson Handheld Telephone 1341-B
SERVICE: Equipment
2
SERVICE: Equipment
Contents
Recommended Service Equipment ___________________ 5
Instruments _____________________________________________ 5
Other Equipment__________________________________________ 7
Service Program ETACS_________________________________ 7
Test Handset __________________________________________ 7
Service Adapter ________________________________________ 7
Appendix A: Frequency Tables
Appendix B: Test Program
Appendix C: Service Program ETACS
Appendix D: Keypad NAM Programming
Appendix E: ESN Transfer
Appendix F: Flash Programming
3
SERVICE: Equipment
4
SERVICE: Equipment
The type of equipment required for service on the Ericsson Handheld Tele-
phone 1341-B includes instruments, tools, and other hardware, but also fre-
quency tables and programs for test, NAM programming, ESN transfer and
software upgrading. The tables, and descriptions of the programs are included
as Appendices A, B, C, D, E and F in this chapter.
Recommended Service Equipment
Instruments
Table 1
Instrument Recommended Unit
Alternative 1:
Radio Test System Marconi 2960
Alternative 2:
Communications Test Set Schlumberger 4031
Alternative 3:
Communications Test Set Schlumberger 4015
Alternative 4:
Radio Test Set Rohde & Schwarz CMS 52
Signalling Unit Rohde & Schwarz CMS-B13
All alternatives:
Oscilloscope Tektronix 2235
Multimeter Hewlett-Packard 3468A
Digital Voltmeter Fluke 8060A
Power Supply Unit Power Box EK030-10
5
SERVICE: Equipment
Figure 1. Service Equipment
6
SERVICE: Equipment
Other Equipment
Table 2
Equipment Ordering Number Note
Personal Computer
(IBM PC/XT/AT Compatible)
Service Program
ETACS Products NTZ 112 180/4
Programming Interface KRY 105 045
Connection Cable KRY 101 1135/7 1.3 m.
Service Adapter NTZ 112 178
Test Handset NTZ 112 211
Adapter Cable NTZ 112 201/2
Interconnector NTZ 112 241
Programming Cable KRY 101 1135/7
Antenna Cable RPM 113 333/2
Torque Drive NTZ 112 287
Torque Bit NTZ 112 288
It is assumed that normal tools and soldering equipment are also available.
Note: When servicing mobile telephones, it is important to use a bench earth-
ing network to protect sensitive components against electrostatic charges
(ESD).
Service Program ETACS
The use of the service program is described in Appendix C, The Service Pro-
gram ETACS.
Test Handset
The built-in test program can be activated and run by a special control unit, the
Test Handset, or directly from the telephone. The Test Program Entry func-
tion must be enabled for accessing the test program directly from the tele-
phone keypad.
Service Adapter
The Service Adapter is used in testing and repairing mobile telephones on the
service bench. It enables you to supply the mobile station with power and to
have certain functions displayed for control.
7
SERVICE: Equipment
8
Appendix A: Frequency Tables
Contents
Frequency Tables for the ETACS System ___________A-3
Table 1. Frequency Channels 1329 - 2047 ____________________A-4
Table 2. Frequency Channels 0 - 600 ________________________A-9
SERVICE: Equipment - App'x A
A-2
SERVICE: Equipment - App'x A
Frequency Tables for the ETACS System
A mobile telephone for the ETACS system operates in full duplex and pro-
vides 1320 channels with a channel spacing of 25 kHz (0.025 MHz) and a du-
plex separation of 45 MHz. The 900 MHz band has been divided into an upper
and a lower band. The lower sub-band, 872.0125 - 904.9875 MHz, covers the
1320 transmitting channels in the handheld telephone, while the upper sub-
band, 917.0125 - 949.9875 MHz, covers the corresponding 1320 receiving
channels. The channels are numbered from 1329 to 2047 and from 0 to 600.
The following formulas can be used to calculate the frequencies (f, MHz) asso-
ciated with a certain channel number (N = channel number).
Frequencies, channels 1329 - 2047 (see table 1):
fTx = 872.0125 + (N-1329) * 0.025 MHz
fRx = 917.0125 + (N-1329) * 0.025 MHz
Frequencies, channels 0 - 600 (see table 2):
fTx = 889.9875 + N * 0.025 MHz
fRx = 934.9875 + N * 0.025 MHz
A-3
SERVICE: Equipment - App'x A
Table 1. Frequency Table for ETACS, Channels 1329 - 1478
Ch. Tx Rx Ch. Tx Rx Ch. Tx Rx
1329 872.0125 917.0125 1379 873.2625 918.2625 1429 874.5125 919.5125
1330 872.0375 917.0375 1380 873.2875 918.2875 1430 874.5375 919.5375
1331 872.0625 917.0625 1381 873.3125 918.3125 1431 874.5625 919.5625
1332 872.0875 917.0875 1382 873.3375 918.3375 1432 874.5875 919.5875
1333 872.1125 917.1125 1383 873.3625 918.3625 1433 874.6125 919.6125
1334 872.1375 917.1375 1384 873.3875 918.3875 1434 874.6375 919.6375
1335 872.1625 917.1625 1385 873.4125 918.4125 1435 874.6625 919.6625
1336 872.1875 917.1875 1386 873.4375 918.4375 1436 874.6875 919.6875
1337 872.2125 917.2125 1387 873.4625 918.4625 1437 874.7125 919.7125
1338 872.2375 917.2375 1388 873.4875 918.4875 1438 874.7375 919.7375
1339 872.2625 917.2625 1389 873.5125 918.5125 1439 874.7625 919.7625
1340 872.2875 917.2875 1390 873.5375 918.5375 1440 874.7875 919.7875
1341 872.3125 917.3125 1391 873.5625 918.5625 1441 874.8125 919.8125
1342 872.3375 917.3375 1392 873.5875 918.5875 1442 874.8375 919.8375
1343 872.3625 917.3625 1393 873.6125 918.6125 1443 874.8625 919.8625
1344 872.3875 917.3875 1394 873.6375 918.6375 1444 874.8875 919.8875
1345 872.4125 917.4125 1395 873.6625 918.6625 1445 874.9125 919.9125
1346 872.4375 917.4375 1396 873.6875 918.6875 1446 874.9375 919.9375
1347 872.4625 917.4625 1397 873.7125 918.7125 1447 874.9625 919.9625
1348 872.4875 917.4875 1398 873.7375 918.7375 1448 874.9875 919.987
1349 872.5125 917.5125 1399 873.7625 918.7625 1449 875.0125 920.0125
1350 872.5375 917.5375 1400 873.7875 918.7875 1450 875.0375 920.0375
1351 872.5625 917.5625 1401 873.8125 918.8125 1451 875.0625 920.0625
1352 872.5875 917.5875 1402 873.8375 918.8375 1452 875.0875 920.0875
1353 872.6125 917.6125 1403 873.8625 918.8625 1453 875.1125 920.1125
1354 872.6375 917.6375 1404 873.8875 918.8875 1454 875.1375 920.1375
1355 872.6625 917.6625 1405 873.9125 918.9125 1455 875.1625 920.1625
1356 872.6875 917.6875 1406 873.9375 918.9375 1456 875.1875 920.1875
1357 872.7125 917.7125 1407 873.9625 918.9625 1457 875.2125 920.2125
1358 872.7375 917.7375 1408 873.9875 918.9875 1458 875.2375 920.2375
1359 872.7625 917.7625 1409 874.0125 919.0125 1459 875.2625 920.2625
1360 872.7875 917.7875 1410 874.0375 919.0375 1460 875.2875 920.2875
1361 872.8125 917.8125 1411 874.0625 919.0625 1461 875.3125 920.3125
1362 872.8375 917.8375 1412 874.0875 919.0875 1462 875.3375 920.3375
1363 872.8625 917.8625 1413 874.1125 919.1125 1463 875.3625 920.3625
1364 872.8875 917.8875 1414 874.1375 919.1375 1464 875.3875 920.3875
1365 872.9125 917.9125 1415 874.1625 919.1625 1465 875.4125 920.4125
1366 872.9375 917.9375 1416 874.1875 919.1875 1466 875.4375 920.4375
1367 872.9625 917.9625 1417 874.2125 919.2125 1467 875.4625 920.4625
1368 872.9875 917.9875 1418 874.2375 919.2375 1468 875.4875 920.4875
1369 873.0125 918.0125 1419 874.2625 919.2625 1469 875.5125 920.5125
1370 873.0375 918.0375 1420 874.2875 919.2875 1470 875.5375 920.5375
1371 873.0625 918.0625 1421 874.3125 919.3125 1471 875.5625 920.5625
1372 873.0875 918.0875 1422 874.3375 919.3375 1472 875.5875 920.5875
1373 873.1125 918.1125 1423 874.3625 919.3625 1473 875.6125 920.6125
1374 873.1375 918.1375 1424 874.3875 919.3875 1474 875.6375 920.6375
1375 873.1625 918.1625 1425 874.4125 919.4125 1475 875.6625 920.6625
1376 873.1875 918.1875 1426 874.4375 919.4375 1476 875.6875 920.6875
1377 873.2125 918.2125 1427 874.4625 919.4625 1477 875.7125 920.7125
1378 873.2375 918.2375 1428 874.4875 919.4875 1478 875.7375 920.7375
A-4
SERVICE: Equipment - App'x A
Table 1. Frequency Table for ETACS, Channels 1479 - 1628
Ch. Tx Rx Ch. Tx Rx Ch. Tx Rx
1479 875.7625 920.7625 1529 877.0125 922.0125 1579 878.2625 923.2625
1480 875.7875 920.7875 1530 877.0375 922.0375 1580 878.2875 923.2875
1481 875.8125 920.8125 1531 877.0625 922.0625 1581 878.3125 923.3125
1482 875.8375 920.8375 1532 877.0875 922.0875 1582 878.3375 923.3375
1483 875.8625 920.8625 1533 877.1125 922.1125 1583 878.3625 923.3625
1484 875.8875 920.8875 1534 877.1375 922.1375 1584 878.3875 923.3875
1485 875.9125 920.9125 1535 877.1625 922.1625 1585 878.4125 923.4125
1486 875.9375 920.9375 1536 877.1875 922.1875 1586 878.4375 923.4375
1487 875.9625 920.9625 1537 877.2125 922.2125 1587 878.4625 923.4625
1488 875.9875 920.9875 1538 877.2375 922.2375 1588 878.4875 923.4875
1489 876.0125 921.0125 1539 877.2625 922.2625 1589 878.5125 923.5125
1490 876.0375 921.0375 1540 877.2875 922.2875 1590 878.5375 923.5375
1491 876.0625 921.0625 1541 877.3125 922.3125 1591 878.5625 923.5625
1492 876.0875 921.0875 1542 877.3375 922.3375 1592 878.5875 923.5875
1493 876.1125 921.1125 1543 877.3625 922.3625 1593 878.6125 923.6125
1494 876.1375 921.1375 1544 877.3875 922.3875 1594 878.6375 923.6375
1495 876.1625 921.1625 1545 877.4125 922.4125 1595 878.6625 923.6625
1496 876.1875 921.1875 1546 877.4375 922.4375 1596 878.6875 923.6875
1497 876.2125 921.2125 1547 877.4625 922.4625 1597 878.7125 923.7125
1498 876.2375 921.2375 1548 877.4875 922.4875 1598 878.7375 923.7375
1499 876.2625 921.2625 1549 877.5125 922.5125 1599 878.7625 923.7625
1500 876.2875 921.2875 1550 877.5375 922.5375 1600 878.7875 923.7875
1501 876.3125 921.3125 1551 877.5625 922.5625 1601 878.8125 923.8125
1502 876.3375 921.3375 1552 877.5875 922.5875 1602 878.8375 923.8375
1503 876.3625 921.3625 1553 877.6125 922.6125 1603 878.8625 923.8625
1504 876.3875 921.3875 1554 877.6375 922.6375 1604 878.8875 923.8875
1505 876.4125 921.4125 1555 877.6625 922.6625 1605 878.9125 923.9125
1506 876.4375 921.4375 1556 877.6875 922.6875 1606 878.9375 923.9375
1507 876.4625 921.4625 1557 877.7125 922.7125 1607 878.9625 923.9625
1508 876.4875 921.4875 1558 877.7375 922.7375 1608 878.9875 923.9875
1509 876.5125 921.5125 1559 877.7625 922.7625 1609 879.0125 924.0125
1510 876.5375 921.5375 1560 877.7875 922.7875 1610 879.0375 924.0375
1511 876.5625 921.5625 1561 877.8125 922.8125 1611 879.0625 924.0625
1512 876.5875 921.5875 1562 877.8375 922.8375 1612 879.0875 924.0875
1513 876.6125 921.6125 1563 877.8625 922.8625 1613 879.1125 924.1125
1514 876.6375 921.6375 1564 877.8875 922.8875 1614 879.1375 924.1375
1515 876.6625 921.6625 1565 877.9125 922.9125 1615 879.1625 924.1625
1516 876.6875 921.6875 1566 877.9375 922.9375 1616 879.1875 924.1875
1517 876.7125 921.7125 1567 877.9625 922.9625 1617 879.2125 924.2125
1518 876.7375 921.7375 1568 877.9875 922.9875 1618 879.2375 924.2375
1519 876.7625 921.7625 1569 878.0125 923.0125 1619 879.2625 924.2625
1520 876.7875 921.7875 1570 878.0375 923.0375 1620 879.2875 924.2875
1521 876.8125 921.8125 1571 878.0625 923.0625 1621 879.3125 924.3125
1522 876.8375 921.8375 1572 878.0875 923.0875 1622 879.3375 924.3375
1523 876.8625 921.8625 1573 878.1125 923.1125 1623 879.3625 924.3625
1524 876.8875 921.8875 1574 878.1375 923.1375 1624 879.3875 924.3875
1525 876.9125 921.9125 1575 878.1625 923.1625 1625 879.4125 924.4125
1526 876.9375 921.9375 1576 878.1875 923.1875 1626 879.4375 924.4375
1527 876.9625 921.9625 1577 878.2125 923.2125 1627 879.4625 924.4625
1528 876.9875 921.9875 1578 878.2375 923.2375 1628 879.4875 924.4875
A-5
SERVICE: Equipment - App'x A
Table 1. Frequency Table for ETACS, Channels 1629 - 1778
Ch. Tx Rx Ch. Tx Rx Ch. Tx Rx
1629 879.5125 924.5125 1679 880.7625 925.7625 1729 882.0125 927.0125
1630 879.5375 924.5375 1680 880.7875 925.7875 1730 882.0375 927.0375
1631 879.5625 924.5625 1681 880.8125 925.8125 1731 882.0625 927.0625
1632 879.5875 924.5875 1682 880.8375 925.8375 1732 882.0875 927.0875
1633 879.6125 924.6125 1683 880.8625 925.8625 1733 882.1125 927.1125
1634 879.6375 924.6375 1684 880.8875 925.8875 1734 882.1375 927.1375
1635 879.6625 924.6625 1685 880.9125 925.9125 1735 882.1625 927.1625
1636 879.6875 924.6875 1686 880.9375 925.9375 1736 882.1875 927.1875
1637 879.7125 924.7125 1687 880.9625 925.9625 1737 882.2125 927.2125
1638 879.7375 924.7375 1688 880.9875 925.9875 1738 882.2375 927.2375
1639 879.7625 924.7625 1689 881.0125 926.0125 1739 882.2625 927.2625
1640 879.7875 924.7875 1690 881.0375 926.0375 1740 882.2875 927.2875
1641 879.8125 924.8125 1691 881.0625 926.0625 1741 882.3125 927.3125
1642 879.8375 924.8375 1692 881.0875 926.0875 1742 882.3375 927.3375
1643 879.8625 924.8625 1693 881.1125 926.1125 1743 882.3625 927.3625
1644 879.8875 924.8875 1694 881.1375 926.1375 1744 882.3875 927.3875
1645 879.9125 924.9125 1695 881.1625 926.1625 1745 882.4125 927.4125
1646 879.9375 924.9375 1696 881.1875 926.1875 1746 882.4375 927.4375
1647 879.9625 924.9625 1697 881.2125 926.2125 1747 882.4625 927.4625
1648 879.9875 924.9875 1698 881.2375 926.2375 1748 882.4875 927.4875
1649 880.0125 925.0125 1699 881.2625 926.2625 1749 882.5125 927.5125
1650 880.0375 925.0375 1700 881.2875 926.2875 1750 882.5375 927.5375
1651 880.0625 925.0625 1701 881.3125 926.3125 1751 882.5625 927.5625
1652 880.0875 925.0875 1702 881.3375 926.3375 1752 882.5875 927.5875
1653 880.1125 925.1125 1703 881.3625 926.3625 1753 882.6125 927.6125
1654 880.1375 925.1375 1704 881.3875 926.3875 1754 882.6375 927.6375
1655 880.1625 925.1625 1705 881.4125 926.4125 1755 882.6625 927.6625
1656 880.1875 925.1875 1706 881.4375 926.4375 1756 882.6875 927.6875
1657 880.2125 925.2125 1707 881.4625 926.4625 1757 882.7125 927.7125
1658 880.2375 925.2375 1708 881.4875 926.4875 1758 882.7375 927.7375
1659 880.2625 925.2625 1709 881.5125 926.5125 1759 882.7625 927.7625
1660 880.2875 925.2875 1710 881.5375 926.5375 1760 882.7875 927.7875
1661 880.3125 925.3125 1711 881.5625 926.5625 1761 882.8125 927.8125
1662 880.3375 925.3375 1712 881.5875 926.5875 1762 882.8375 927.8375
1663 880.3625 925.3625 1713 881.6125 926.6125 1763 882.8625 927.8625
1664 880.3875 925.3875 1714 881.6375 926.6375 1764 882.8875 927.8875
1665 880.4125 925.4125 1715 881.6625 926.6625 1765 882.9125 927.9125
1666 880.4375 925.4375 1716 881.6875 926.6875 1766 882.9375 927.9375
1667 880.4625 925.4625 1717 881.7125 926.7125 1767 882.9625 927.9625
1668 880.4875 925.4875 1718 881.7375 926.7375 1768 882.9875 927.9875
1669 880.5125 925.5125 1719 881.7625 926.7625 1769 883.0125 928.0125
1670 880.5375 925.5375 1720 881.7875 926.7875 1770 883.0375 928.0375
1671 880.5625 925.5625 1721 881.8125 926.8125 1771 883.0625 928.0625
1672 880.5875 925.5875 1722 881.8375 926.8375 1772 883.0875 928.0875
1673 880.6125 925.6125 1723 881.8625 926.8625 1773 883.1125 928.1125
1674 880.6375 925.6375 1724 881.8875 926.8875 1774 883.1375 928.1375
1675 880.6625 925.6625 1725 881.9125 926.9125 1775 883.1625 928.1625
1676 880.6875 925.6875 1726 881.9375 926.9375 1776 883.1875 928.1875
1677 880.7125 925.7125 1727 881.9625 926.9625 1777 883.2125 928.2125
1678 880.7375 925.7375 1728 881.9875 926.9875 1778 883.2375 928.2375
A-6
SERVICE: Equipment - App'x A
Table 1. Frequency Table for ETACS, Channels 1779 - 1928
Ch. Tx Rx Ch. Tx Rx Ch. Tx Rx
1779 883.2625 928.2625 1829 884.5125 929.5125 1879 885.7625 930.7625
1780 883.2875 928.2875 1830 884.5375 929.5375 1880 885.7875 930.7875
1781 883.3125 928.3125 1831 884.5625 929.5625 1881 885.8125 930.8125
1782 883.3375 928.3375 1832 884.5875 929.5875 1882 885.8375 930.8375
1783 883.3625 928.3625 1833 884.6125 929.6125 1883 885.8625 930.8625
1784 883.3875 928.3875 1834 884.6375 929.6375 1884 885.8875 930.8875
1785 883.4125 928.4125 1835 884.6625 929.6625 1885 885.9125 930.9125
1786 883.4375 928.4375 1836 884.6875 929.6875 1886 885.9375 930.9375
1787 883.4625 928.4625 1837 884.7125 929.7125 1887 885.9625 930.9625
1788 883.4875 928.4875 1838 884.7375 929.7375 1888 885.9875 930.9875
1789 883.5125 928.5125 1839 884.7625 929.7625 1889 886.0125 931.0125
1790 883.5375 928.5375 1840 884.7875 929.7875 1890 886.0375 931.0375
1791 883.5625 928.5625 1841 884.8125 929.8125 1891 886.0625 931.0625
1792 883.5875 928.5875 1842 884.8375 929.8375 1892 886.0875 931.0875
1793 883.6125 928.6125 1843 884.8625 929.8625 1893 886.1125 931.1125
1794 883.6375 928.6375 1844 884.8875 929.8875 1894 886.1375 931.1375
1795 883.6625 928.6625 1845 884.9125 929.9125 1895 886.1625 931.1625
1796 883.6875 928.6875 1846 884.9375 929.9375 1896 886.1875 931.1875
1797 883.7125 928.7125 1847 884.9625 929.9625 1897 886.2125 931.2125
1798 883.7375 928.7375 1848 884.9875 929.9875 1898 886.2375 931.2375
1799 883.7625 928.7625 1849 885.0125 930.0125 1899 886.2625 931.2625
1800 883.7875 928.7875 1850 885.0375 930.0375 1900 886.2875 931.2875
1801 883.8125 928.8125 1851 885.0625 930.0625 1901 886.3125 931.3125
1802 883.8375 928.8375 1852 885.0875 930.0875 1902 886.3375 931.3375
1803 883.8625 928.8625 1853 885.1125 930.1125 1903 886.3625 931.3625
1804 883.8875 928.8875 1854 885.1375 930.1375 1904 886.3875 931.3875
1805 883.9125 928.9125 1855 885.1625 930.1625 1905 886.4125 931.4125
1806 883.9375 928.9375 1856 885.1875 930.1875 1906 886.4375 931.4375
1807 883.9625 928.9625 1857 885.2125 930.2125 1907 886.4625 931.4625
1808 883.9875 928.9875 1858 885.2375 930.2375 1908 886.4875 931.4875
1809 884.0125 929.0125 1859 885.2625 930.2625 1909 886.5125 931.5125
1810 884.0375 929.0375 1860 885.2875 930.2875 1910 886.5375 931.5375
1811 884.0625 929.0625 1861 885.3125 930.3125 1911 886.5625 931.5625
1812 884.0875 929.0875 1862 885.3375 930.3375 1912 886.5875 931.5875
1813 884.1125 929.1125 1863 885.3625 930.3625 1913 886.6125 931.6125
1814 884.1375 929.1375 1864 885.3875 930.3875 1914 886.6375 931.6375
1815 884.1625 929.1625 1865 885.4125 930.4125 1915 886.6625 931.6625
1816 884.1875 929.1875 1866 885.4375 930.4375 1916 886.6875 931.6875
1817 884.2125 929.2125 1867 885.4625 930.4625 1917 886.7125 931.7125
1818 884.2375 929.2375 1868 885.4875 930.4875 1918 886.7375 931.7375
1819 884.2625 929.2625 1869 885.5125 930.5125 1919 886.7625 931.7625
1820 884.2875 929.2875 1870 885.5375 930.5375 1920 886.7875 931.7875
1821 884.3125 929.3125 1871 885.5625 930.5625 1921 886.8125 931.8125
1822 884.3375 929.3375 1872 885.5875 930.5875 1922 886.8375 931.8375
1823 884.3625 929.3625 1873 885.6125 930.6125 1923 886.8625 931.8625
1824 884.3875 929.3875 1874 885.6375 930.6375 1924 886.8875 931.8875
1825 884.4125 929.4125 1875 885.6625 930.6625 1925 886.9125 931.9125
1826 884.4375 929.4375 1876 885.6875 930.6875 1926 886.9375 931.9375
1827 884.4625 929.4625 1877 885.7125 930.7125 1927 886.9625 931.9625
1828 884.4875 929.4875 1878 885.7375 930.7375 1928 886.9875 931.9875
A-7
SERVICE: Equipment - App'x A
Table 1. Frequency Table for ETACS, Channels 1929 - 2047
Ch. Tx Rx Ch. Tx Rx Ch. Tx Rx
1929 887.0125 932.0125 1979 888.2625 933.2625 2029 889.5125 934.5125
1930 887.0375 932.0375 1980 888.2875 933.2875 2030 889.5375 934.5375
1931 887.0625 932.0625 1981 888.3125 933.3125 2031 889.5625 934.5625
1932 887.0875 932.0875 1982 888.3375 933.3375 2032 889.5875 934.5875
1933 887.1125 932.1125 1983 888.3625 933.3625 2033 889.6125 934.6125
1934 887.1375 932.1375 1984 888.3875 933.3875 2034 889.6375 934.6375
1935 887.1625 932.1625 1985 888.4125 933.4125 2035 889.6625 934.6625
1936 887.1875 932.1875 1986 888.4375 933.4375 2036 889.6875 934.6875
1937 887.2125 932.2125 1987 888.4625 933.4625 2037 889.7125 934.7125
1938 887.2375 932.2375 1988 888.4875 933.4875 2038 889.7375 934.7375
1939 887.2625 932.2625 1989 888.5125 933.5125 2039 889.7625 934.7625
1940 887.2875 932.2875 1990 888.5375 933.5375 2040 889.7875 934.7875
1941 887.3125 932.3125 1991 888.5625 933.5625 2041 889.8125 934.8125
1942 887.3375 932.3375 1992 888.5875 933.5875 2042 889.8375 934.8375
1943 887.3625 932.3625 1993 888.6125 933.6125 2043 889.8625 934.8625
1944 887.3875 932.3875 1994 888.6375 933.6375 2044 889.8875 934.8875
1945 887.4125 932.4125 1995 888.6625 933.6625 2045 889.9125 934.9125
1946 887.4375 932.4375 1996 888.6875 933.6875 2046 889.9375 934.9375
1947 887.4625 932.4625 1997 888.7125 933.7125 2047 889.9625 934.9625
1948 887.4875 932.4875 1998 888.7375 933.7375
1949 887.5125 932.5125 1999 888.7625 933.7625
1950 887.5375 932.5375 2000 888.7875 933.7875
1951 887.5625 932.5625 2001 888.8125 933.8125
1952 887.5875 932.5875 2002 888.8375 933.8375
1953 887.6125 932.6125 2003 888.8625 933.8625
1954 887.6375 932.6375 2004 888.8875 933.8875
1955 887.6625 932.6625 2005 888.9125 933.9125
1956 887.6875 932.6875 2006 888.9375 933.9375
1957 887.7125 932.7125 2007 888.9625 933.9625
1958 887.7375 932.7375 2008 888.9875 933.9875
1959 887.7625 932.7625 2009 889.0125 934.0125
1960 887.7875 932.7875 2010 889.0375 934.0375
1961 887.8125 932.8125 2011 889.0625 934.0625
1962 887.8375 932.8375 2012 889.0875 934.0875
1963 887.8625 932.8625 2013 889.1125 934.1125
1964 887.8875 932.8875 2014 889.1375 934.1375
1965 887.9125 932.9125 2015 889.1625 934.1625
1966 887.9375 932.9375 2016 889.1875 934.1875
1967 887.9625 932.9625 2017 889.2125 934.2125
1968 887.9875 932.9875 2018 889.2375 934.2375
1969 888.0125 933.0125 2019 889.2625 934.2625
1970 888.0375 933.0375 2020 889.2875 934.2875
1971 888.0625 933.0625 2021 889.3125 934.3125
1972 888.0875 933.0875 2022 889.3375 934.3375
1973 888.1125 933.1125 2023 889.3625 934.3625
1974 888.1375 933.1375 2024 889.3875 934.3875
1975 888.1625 933.1625 2025 889.4125 934.4125
1976 888.1875 933.1875 2026 889.4375 934.4375
1977 888.2125 933.2125 2027 889.4625 934.4625
1978 888.2375 933.2375 2028 889.4875 934.4875
A-8
SERVICE: Equipment - App'x A
Table 2. Frequency Table for ETACS, Channels 0 - 149
Ch. Tx Rx Ch. Tx Rx Ch. Tx Rx
0 889.9875 934.9875 50 891.2375 936.2375 100 892.4875 937.4875
1 890.0125 935.0125 51 891.2625 936.2625 101 892.5125 937.5125
2 890.0375 935.0375 52 891.2875 936.2875 102 892.5375 937.5375
3 890.0625 935.0625 53 891.3125 936.3125 103 892.5625 937.5625
4 890.0875 935.0875 54 891.3375 936.3375 104 892.5875 937.5875
5 890.1125 935.1125 55 891.3625 936.3625 105 892.6125 937.6125
6 890.1375 935.1375 56 891.3875 936.3875 106 892.6375 937.6375
7 890.1625 935.1625 57 891.4125 936.4125 107 892.6625 937.6625
8 890.1875 935.1875 58 891.4375 936.4375 108 892.6875 937.6875
9 890.2125 935.2125 59 891.4625 936.4625 109 892.7125 937.7125
10 890.2375 935.2375 60 891.4875 936.4875 110 892.7375 937.7375
11 890.2625 935.2625 61 891.5125 936.5125 111 892.7625 937.7625
12 890.2875 935.2875 62 891.5375 936.5375 112 892.7875 937.7875
13 890.3125 935.3125 63 891.5625 936.5625 113 892.8125 937.8125
14 890.3375 935.3375 64 891.5875 936.5875 114 892.8375 937.8375
15 890.3625 935.3625 65 891.6125 936.6125 115 892.8625 937.8625
16 890.3875 935.3875 66 891.6375 936.6375 116 892.8875 937.8875
17 890.4125 935.4125 67 891.6625 936.6625 117 892.9125 937.9125
18 890.4375 935.4375 68 891.6875 936.6875 118 892.9375 937.9375
19 890.4625 935.4625 69 891.7125 936.7125 119 892.9625 937.9625
20 890.4875 935.4875 70 891.7375 936.7375 120 892.9875 937.9875
21 890.5125 935.5125 71 891.7625 936.7625 121 893.0125 938.0125
22 890.5375 935.5375 72 891.7875 936.7875 122 893.0375 938.0375
23 890.5625 935.5625 73 891.8125 936.8125 123 893.0625 938.0625
24 890.5875 935.5875 74 891.8375 936.8375 124 893.0875 938.0875
25 890.6125 935.6125 75 891.8625 936.8625 125 893.1125 938.1125
26 890.6375 935.6375 76 891.8875 936.8875 126 893.1375 938.1375
27 890.6625 935.6625 77 891.9125 936.9125 127 893.1625 938.1625
28 890.6875 935.6875 78 891.9375 936.9375 128 893.1875 938.1875
29 890.7125 935.7125 79 891.9625 936.9625 129 893.2125 938.2125
30 890.7375 935.7375 80 891.9875 936.9875 130 893.2375 938.2375
31 890.7625 935.7625 81 892.0125 937.0125 131 893.2625 938.2625
32 890.7875 935.7875 82 892.0375 937.0375 132 893.2875 938.2875
33 890.8125 935.8125 83 892.0625 937.0625 133 893.3125 938.3125
34 890.8375 935.8375 84 892.0875 937.0875 134 893.3375 938.3375
35 890.8625 935.8625 85 892.1125 937.1125 135 893.3625 938.3625
36 890.8875 935.8875 86 892.1375 937.1375 136 893.3875 938.3875
37 890.9125 935.9125 87 892.1625 937.1625 137 893.4125 938.4125
38 890.9375 935.9375 88 892.1875 937.1875 138 893.4375 938.4375
39 890.9625 935.9625 89 892.2125 937.2125 139 893.4625 938.4625
40 890.9875 935.9875 90 892.2375 937.2375 140 893.4875 938.4875
41 891.0125 936.0125 91 892.2625 937.2625 141 893.5125 938.5125
42 891.0375 936.0375 92 892.2875 937.2875 142 893.5375 938.5375
43 891.0625 936.0625 93 892.3125 937.3125 143 893.5625 938.5625
44 891.0875 936.0875 94 892.3375 937.3375 144 893.5875 938.5875
45 891.1125 936.1125 95 892.3625 937.3625 145 893.6125 938.6125
46 891.1375 936.1375 96 892.3875 937.3875 146 893.6375 938.6375
47 891.1625 936.1625 97 892.4125 937.4125 147 893.6625 938.6625
48 891.1875 936.1875 98 892.4375 937.4375 148 893.6875 938.6875
49 891.2125 936.2125 99 892.4625 937.4625 149 893.7125 938.7125
A-9
SERVICE: Equipment - App'x A
Table 2. Frequency Table for ETACS, Channels 150 - 299
Ch. Tx Rx Ch. Tx Rx Ch. Tx Rx
150 893.7375 938.7375 200 894.9875 939.9875 250 896.2375 941.2375
151 893.7625 938.7625 201 895.0125 940.0125 251 896.2625 941.2625
152 893.7875 938.7875 202 895.0375 940.0375 252 896.2875 941.2875
153 893.8125 938.8125 203 895.0625 940.0625 253 896.3125 941.3125
154 893.8375 938.8375 204 895.0875 940.0875 254 896.3375 941.3375
155 893.8625 938.8625 205 895.1125 940.1125 255 896.3625 941.3625
156 893.8875 938.8875 206 895.1375 940.1375 256 896.3875 941.3875
157 893.9125 938.9125 207 895.1625 940.1625 257 896.4125 941.4125
158 893.9375 938.9375 208 895.1875 940.1875 258 896.4375 941.4375
159 893.9625 938.9625 209 895.2125 940.2125 259 896.4625 941.4625
160 893.9875 938.9875 210 895.2375 940.2375 260 896.4875 941.4875
161 894.0125 939.0125 211 895.2625 940.2625 261 896.5125 941.5125
162 894.0375 939.0375 212 895.2875 940.2875 262 896.5375 941.5375
163 894.0625 939.0625 213 895.3125 940.3125 263 896.5625 941.5625
164 894.0875 939.0875 214 895.3375 940.3375 264 896.5875 941.5875
165 894.1125 939.1125 215 895.3625 940.3625 265 896.6125 941.6125
166 894.1375 939.1375 216 895.3875 940.3875 266 896.6375 941.6375
167 894.1625 939.1625 217 895.4125 940.4125 267 896.6625 941.6625
168 894.1875 939.1875 218 895.4375 940.4375 268 896.6875 941.6875
169 894.2125 939.2125 219 895.4625 940.4625 269 896.7125 941.7125
170 894.2375 939.2375 220 895.4875 940.4875 270 896.7375 941.7375
171 894.2625 939.2625 221 895.5125 940.5125 271 896.7625 941.7625
172 894.2875 939.2875 222 895.5375 940.5375 272 896.7875 941.7875
173 894.3125 939.3125 223 895.5625 940.5625 273 896.8125 941.8125
174 894.3375 939.3375 224 895.5875 940.5875 274 896.8375 941.8375
175 894.3625 939.3625 225 895.6125 940.6125 275 896.8625 941.8625
176 894.3875 939.3875 226 895.6375 940.6375 276 896.8875 941.8875
177 894.4125 939.4125 227 895.6625 940.6625 277 896.9125 941.9125
178 894.4375 939.4375 228 895.6875 940.6875 278 896.9375 941.9375
179 894.4625 939.4625 229 895.7125 940.7125 279 896.9625 941.9625
180 894.4875 939.4875 230 895.7375 940.7375 280 896.9875 941.9875
181 894.5125 939.5125 231 895.7625 940.7625 281 897.0125 942.0125
182 894.5375 939.5375 232 895.7875 940.7875 282 897.0375 942.0375
183 894.5625 939.5625 233 895.8125 940.8125 283 897.0625 942.0625
184 894.5875 939.5875 234 895.8375 940.8375 284 897.0875 942.0875
185 894.6125 939.6125 235 895.8625 940.8625 285 897.1125 942.1125
186 894.6375 939.6375 236 895.8875 940.8875 286 897.1375 942.1375
187 894.6625 939.6625 237 895.9125 940.9125 287 897.1625 942.1625
188 894.6875 939.6875 238 895.9375 940.9375 288 897.1875 942.1875
189 894.7125 939.7125 239 895.9625 940.9625 289 897.2125 942.2125
190 894.7375 939.7375 240 895.9875 940.9875 290 897.2375 942.2375
191 894.7625 939.7625 241 896.0125 941.0125 291 897.2625 942.2625
192 894.7875 939.7875 242 896.0375 941.0375 292 897.2875 942.2875
193 894.8125 939.8125 243 896.0625 941.0625 293 897.3125 942.3125
194 894.8375 939.8375 244 896.0875 941.0875 294 897.3375 942.3375
195 894.8625 939.8625 245 896.1125 941.1125 295 897.3625 942.3625
196 894.8875 939.8875 246 896.1375 941.1375 296 897.3875 942.3875
197 894.9125 939.9125 247 896.1625 941.1625 297 897.4125 942.4125
198 894.9375 939.9375 248 896.1875 941.1875 298 897.4375 942.4375
199 894.9625 939.9625 249 896.2125 941.2125 299 897.4625 942.4625
A-10
SERVICE: Equipment - App'x A
Table 2. Frequency Table for ETACS, Channels 300 - 449
Ch. Tx Rx Ch. Tx Rx Ch. Tx Rx
300 897.4875 942.4875 350 898.7375 943.7375 400 899.9875 944.9875
301 897.5125 942.5125 351 898.7625 943.7625 401 900.0125 945.0125
302 897.5375 942.5375 352 898.7875 943.7875 402 900.0375 945.0375
303 897.5625 942.5625 353 898.8125 943.8125 403 900.0625 945.0625
304 897.5875 942.5875 354 898.8375 943.8375 404 900.0875 945.0875
305 897.6125 942.6125 355 898.8625 943.8625 405 900.1125 945.1125
306 897.6375 942.6375 356 898.8875 943.8875 406 900.1375 945.1375
307 897.6625 942.6625 357 898.9125 943.9125 407 900.1625 945.1625
308 897.6875 942.6875 358 898.9375 943.9375 408 900.1875 945.1875
309 897.7125 942.7125 359 898.9625 943.9625 409 900.2125 945.2125
310 897.7375 942.7375 360 898.9875 943.9875 410 900.2375 945.2375
311 897.7625 942.7625 361 899.0125 944.0125 411 900.2625 945.2625
312 897.7875 942.7875 362 899.0375 944.0375 412 900.2875 945.2875
313 897.8125 942.8125 363 899.0625 944.0625 413 900.3125 945.3125
314 897.8375 942.8375 364 899.0875 944.0875 414 900.3375 945.3375
315 897.8625 942.8625 365 899.1125 944.1125 415 900.3625 945.3625
316 897.8875 942.8875 366 899.1375 944.1375 416 900.3875 945.3875
317 897.9125 942.9125 367 899.1625 944.1625 417 900.4125 945.4125
318 897.9375 942.9375 368 899.1875 944.1875 418 900.4375 945.4375
319 897.9625 942.9625 369 899.2125 944.2125 419 900.4625 945.4625
320 897.9875 942.9875 370 899.2375 944.2375 420 900.4875 945.4875
321 898.0125 943.0125 371 899.2625 944.2625 421 900.5125 945.5125
322 898.0375 943.0375 372 899.2875 944.2875 422 900.5375 945.5375
323 898.0625 943.0625 373 899.3125 944.3125 423 900.5625 945.5625
324 898.0875 943.0875 374 899.3375 944.3375 424 900.5875 945.5875
325 898.1125 943.1125 375 899.3625 944.3625 425 900.6125 945.6125
326 898.1375 943.1375 376 899.3875 944.3875 426 900.6375 945.6375
327 898.1625 943.1625 377 899.4125 944.4125 427 900.6625 945.6625
328 898.1875 943.1875 378 899.4375 944.4375 428 900.6875 945.6875
329 898.2125 943.2125 379 899.4625 944.4625 429 900.7125 945.7125
330 898.2375 943.2375 380 899.4875 944.4875 430 900.7375 945.7375
331 898.2625 943.2625 381 899.5125 944.5125 431 900.7625 945.7625
332 898.2875 943.2875 382 899.5375 944.5375 432 900.7875 945.7875
333 898.3125 943.3125 383 899.5625 944.5625 433 900.8125 945.8125
334 898.3375 943.3375 384 899.5875 944.5875 434 900.8375 945.8375
335 898.3625 943.3625 385 899.6125 944.6125 435 900.8625 945.8625
336 898.3875 943.3875 386 899.6375 944.6375 436 900.8875 945.8875
337 898.4125 943.4125 387 899.6625 944.6625 437 900.9125 945.9125
338 898.4375 943.4375 388 899.6875 944.6875 438 900.9375 945.9375
339 898.4625 943.4625 389 899.7125 944.7125 439 900.9625 945.9625
340 898.4875 943.4875 390 899.7375 944.7375 440 900.9875 945.9875
341 898.5125 943.5125 391 899.7625 944.7625 441 901.0125 946.0125
342 898.5375 943.5375 392 899.7875 944.7875 442 901.0375 946.0375
343 898.5625 943.5625 393 899.8125 944.8125 443 901.0625 946.0625
344 898.5875 943.5875 394 899.8375 944.8375 444 901.0875 946.0875
345 898.6125 943.6125 395 899.8625 944.8625 445 901.1125 946.1125
346 898.6375 943.6375 396 899.8875 944.8875 446 901.1375 946.1375
347 898.6625 943.6625 397 899.9125 944.9125 447 901.1625 946.1625
348 898.6875 943.6875 398 899.9375 944.9375 448 901.1875 946.1875
349 898.7125 943.7125 399 899.9625 944.9625 449 901.2125 946.2125
A-11
SERVICE: Equipment - App'x A
Table 2. Frequency Table for ETACS, Channels 450 - 600
Ch. Tx Rx Ch. Tx Rx Ch. Tx Rx
450 901.2375 946.2375 500 902.4875 947.4875 550 903.7375 948.7375
451 901.2625 946.2625 501 902.5125 947.5125 551 903.7625 948.7625
452 901.2875 946.2875 502 902.5375 947.5375 552 903.7875 948.7875
453 901.3125 946.3125 503 902.5625 947.5625 553 903.8125 948.8125
454 901.3375 946.3375 504 902.5875 947.5875 554 903.8375 948.8375
455 901.3625 946.3625 505 902.6125 947.6125 555 903.8625 948.8625
456 901.3875 946.3875 506 902.6375 947.6375 556 903.8875 948.8875
457 901.4125 946.4125 507 902.6625 947.6625 557 903.9125 948.9125
458 901.4375 946.4375 508 902.6875 947.6875 558 903.9375 948.9375
459 901.4625 946.4625 509 902.7125 947.7125 559 903.9625 948.9625
460 901.4875 946.4875 510 902.7375 947.7375 560 903.9875 948.9875
461 901.5125 946.5125 511 902.7625 947.7625 561 904.0125 949.0125
462 901.5375 946.5375 512 902.7875 947.7875 562 904.0375 949.0375
463 901.5625 946.5625 513 902.8125 947.8125 563 904.0625 949.0625
464 901.5875 946.5875 514 902.8375 947.8375 564 904.0875 949.0875
465 901.6125 946.6125 515 902.8625 947.8625 565 904.1125 949.1125
466 901.6375 946.6375 516 902.8875 947.8875 566 904.1375 949.1375
467 901.6625 946.6625 517 902.9125 947.9125 567 904.1625 949.1625
468 901.6875 946.6875 518 902.9375 947.9375 568 904.1875 949.1875
469 901.7125 946.7125 519 902.9625 947.9625 569 904.2125 949.2125
470 901.7375 946.7375 520 902.9875 947.9875 570 904.2375 949.2375
471 901.7625 946.7625 521 903.0125 948.0125 571 904.2625 949.2625
472 901.7875 946.7875 522 903.0375 948.0375 572 904.2875 949.2875
473 901.8125 946.8125 523 903.0625 948.0625 573 904.3125 949.3125
474 901.8375 946.8375 524 903.0875 948.0875 574 904.3375 949.3375
475 901.8625 946.8625 525 903.1125 948.1125 575 904.3625 949.3625
476 901.8875 946.8875 526 903.1375 948.1375 576 904.3875 949.3875
477 901.9125 946.9125 527 903.1625 948.1625 577 904.4125 949.4125
478 901.9375 946.9375 528 903.1875 948.1875 578 904.4375 949.4375
479 901.9625 946.9625 529 903.2125 948.2125 579 904.4625 949.4625
480 901.9875 946.9875 530 903.2375 948.2375 580 904.4875 949.4875
481 902.0125 947.0125 531 903.2625 948.2625 581 904.5125 949.5125
482 902.0375 947.0375 532 903.2875 948.2875 582 904.5375 949.5375
483 902.0625 947.0625 533 903.3125 948.3125 583 904.5625 949.5625
484 902.0875 947.0875 534 903.3375 948.3375 584 904.5875 949.5875
485 902.1125 947.1125 535 903.3625 948.3625 585 904.6125 949.6125
486 902.1375 947.1375 536 903.3875 948.3875 586 904.6375 949.6375
487 902.1625 947.1625 537 903.4125 948.4125 587 904.6625 949.6625
488 902.1875 947.1875 538 903.4375 948.4375 588 904.6875 949.6875
489 902.2125 947.2125 539 903.4625 948.4625 589 904.7125 949.7125
490 902.2375 947.2375 540 903.4875 948.4875 590 904.7375 949.7375
491 902.2625 947.2625 541 903.5125 948.5125 591 904.7625 949.7625
492 902.2875 947.2875 542 903.5375 948.5375 592 904.7875 949.7875
493 902.3125 947.3125 543 903.5625 948.5625 593 904.8125 949.8125
494 902.3375 947.3375 544 903.5875 948.5875 594 904.8375 949.8375
495 902.3625 947.3625 545 903.6125 948.6125 595 904.8625 949.8625
496 902.3875 947.3875 546 903.6375 948.6375 596 904.8875 949.8875
497 902.4125 947.4125 547 903.6625 948.6625 597 904.9125 949.9125
498 902.4375 947.4375 548 903.6875 948.6875 598 904.9375 949.9375
499 902.4625 947.4625 549 903.7125 948.7125 599 904.9625 949.9625
600 904.9875 949.9875
A-12
Appendix B: Test Program
Contents
How to Use _________________________________________ B-3
Preparation ____________________________________________ B-3
Initiating the Test Program _______________________________ B-3
Display Test ___________________________________________ B-3
Selecting a Specific Test__________________________________ B-4
Return to TEST INPUT __________________________________ B-4
Exit __________________________________________________ B-4
Individual Test Options _____________________________ B-5
Table 1. Overview of the Test Program ____________________ B-16
Additional Tests _______________________________________ B-19
SERVICE: Equipment - App'x B
B-2
SERVICE: Equipment - App'x B
How to Use
This document will describe the use of the built-in test program for the hand-
held telephone. After the more extensive descriptions in Individual Test Op-
tions follows an overview in the form of a table with data pertaining to the
different options. With some experience with the test program you may find
this table a handy alternative.
Preparation
To prevent the telephone from switching off after 30 seconds in transmission
mode, the autonomous timeout function must be disabled. This can be done
by applying a voltage of +5 V at the VPPFLASH input (pin 9) of the external
connector J105, or by activating the Service switch on the Service Adapter.
Initiating the Test Program
The test program is activated from the special test handset by holding down
the M button and pressing R three times. However, if the Test Program Enter
function is enabled in the telephone, the program can be activated and run di-
rectly from the keypad by holding down the M button and pressing
904059
When the handheld telephone enters the test mode, the hardware is initialized.
The text TEST INPUT appears on the display.
Display Test
The test program can be activated and run by a test handset. The display is
tested with the aid of a special test option (No. 45).
B-3
SERVICE: Equipment - App'x B
Selecting a Specific Test
When the test program has been initiated, the prompt TEST INPUT appears
on the display. A test option is selected by entering X# or XY# (X and Y are
digits from 0 to 9).
You may also step up or down to the next option in the test program, using a
test handset; the SEND button for up-step and the RCL button for down-step.
The specified test option will then be performed, and a message shown on the
display. Any parameter set or read will be shown as well.
Data will be read and displayed once a second.
Selectable parameters may be altered by specifying the new value . If the new
value is approved, the setting will be altered as shown by the display, and the
current menu will remain active. If the new value is not approved, the old
value will remain.
Example
How the different parameters are selected and introduced into a test is ex-
plained in Individual Test Options. A complete series of entries may have the
structure shown below:
1 # 3 2 6 # C 2 # 2 C 23 # 3 C
The first figure (1) is the number of the option CHANNEL NUMBER se-
lected in the test menu. The next (326) is a channel number indexed while
CHANNEL NUMBER applies.
The 2 after the asterisk indicates that option 2 TX POWER of the menu has
been selected. Here alternative 2 was chosen, which provides a transmission
power of 0.45 W, as you will find in the description of this particular option.
Lastly, option 23 in the menu, MANCHOUT, has been selected, and here alter-
native 3 will provide transmission of a special frame.
Return to TEST INPUT
Depress the C-button to return to the input mode, where the TEST INPUT
prompt is displayed.
Exit
To leave the test program, select test option 99.
B-4
SERVICE: Equipment - App'x B
Individual Test Options
A list describing the use of the test program options follows below. A sum-
mary of the test options and possible parameter values is given in Table 1.
1 CH NR Setting of channel number. The initial setting is channel 1.
Permissible settings: 1329 - 2047 and 0 - 600.
Select channel, indexing its number on the keypad and
pressing #. The v and w buttons can be used to step for-
wards or backwards from the current channel number.
Channel number and signal strength are displayed.
2 TX POWER Sets the transmitter ON/OFF and determines the output
power level..
8 : OFF
7 : min
.
.
2 : max.
Note: The transmitter will go on only if the Tx and Rx syn-
thesizers are locked.
The Power Reduction function (test 76), if activated,
causes 2 (Power Level 2) to be displayed as #.
3 LOCKTIME (Factory use only). Measures Tx/Rx synth. locktime.
5 PWR CAL Calibration of power levels.
The frequency band is divided into three parts with three
corresponding Transmitter Input Voltage Tables. Press 0, 1
or 2 to select either table.The table showing power level
and current voltage value is displayed, the initial value read
from the EEPROM. Use the v and w buttons to change
the value. Press M and S simultaneously to store the value
in EEPROM or M and # to step to the next power level.
When selecting a new table, the relevant channel for trans-
mission is automatically selected.
Input Voltage Table and the corresponding channels:
Table Used Channel Channels
0 1500 1329-200
1 350 201-450
2 500 451-600
Power Levels and Output Power that should exist on the re-
spective level:
Continued on next page
B-5
SERVICE: Equipment - App'x B
PL Output Power
2 26.5 dBm+2/-4 dBm
3 22.5 dBm+2/-4 dBm
4 18.5 dBm+2/-4 dBm
5 14.5 dBm+2/-4 dBm
6 10.5 dBm+2/-4 dBm
7 6.5 dBm+2/-4 dBm
7 TXSENS (Factory use only). Control of soft trimmer potentiometers
in the LINA circuit.
Press M & # to enable calibration and to display present
value in the range 00 to 1F.
Press v or w to change the value.
Press M & S to store the new value in EEPROM.
9 RF CAL Setting of RSSI level and max. AFC frequency compensa-
tion. Before entering this option make sure that the fre-
quency is properly aligned.
Adjust signal level to -115 dBm, and press M and S simul-
taneously. Value stored in EEPROM/RAM is displayed.
If the frequency error of the received signal is greater than
1 kHz, an alarm will be heard, and further programming
cannot take place.
10 RXSENS Adjustment of soft trimmer potentiometers in the LINA cir-
cuit.
0 : Rx source AFMS
1 : Rx source earphone
Press M & # to enable calibration and to display present
value in the range from 00 to 1F.
Press v or w to change the value.
Press M & S to store the new value in EEPROM.
11 KEYPAD (Factory use only). Sends information on DFMS for each
button pressed, except for the C-button.
12 C CAL Before entering this test, connect an ammeter between
power supply and telephone. The value to be used in cali-
bration is the shown value in mA divided by 700 and multi-
plied by 30 (which provides a 1- or 2-digit decimal value).
When entering the test, the green LED and illumination
will go On. Enter the divided-by-25 mA value and press
M & S; a wrong entry may be erased by M & #.
After storing the standby consumption, the telephone turns
the transmitter On, and the ammeter shows the lowest
power level; divide and multiply ammeter reading, and
calibrate as before.
Proceed with remaining power levels.
B-6
SERVICE: Equipment - App'x B
13 BANDGAP Calibration of Battery Full Level value and internal refer-
ence voltage ("Bandgap") in the BERTRAM circuit.
This calibration must be performed before any other cali-
bration involving BERTRAM.
1. Adjust supply voltage to 5.3 V at battery connector and
press M & S to memorize this calibration. The two values
will be displayed - the Low Battery value in the AND*)
and the internal reference voltage in the DDD*).
2. Increase the voltage to 8.1 V and press M & S to me-
morise this calibration. The stored value will be shown in
the AND.
The program then returns to TEST INPUT.
*)
AND = Alpha/Numeric Display
DDD = Dialled Digits Display.
14 AUDDEV Adjustment of soft trimmer potentiometers in the LINA cir-
cuit. Max. deviation.
This calibration must be performed before any other
calibration involving deviation.
Press M & # to enable calibration and to display present
value in the range from 00 to 0F.
Press v or w to change the value.
Press M & S to store the new value in EEPROM.
15 AFC Selection of AFC mode (shown on the numeric display):
0 : AFC off
1 : Normal operation (default)
2 : Normal operation without age offset update
Any other code entered in Handset Mode will display:
TO TE FR S , where
TO = total compensation (temp.+ age + freq. error)
TE = temperature table compensation
FR = frequency error compensation
S = AFC state
1,2 = no valid RSSI
3 = locked to a channel;
4,5 = RSSI temperature lost
16 DAC1CAL (Factory use only). Automatic trimming of the TxVCO
control input DC level (for radios with combined ceramic
duplex filter). Pressing M & 0 will activate calibration and
stored value will be shown on the DDD.
17 MF COUNT Counts how many E-clock cycles have elapsed while a
counter in CARL counted 2432 cycles of the 54 kHz signal
from BERTRAM. The number is subtracted from the cor-
rect number of cycles, and the result is shown as a 4-digit
hexadecimal number, the relevant plus or minus sign in-
cluded.
B-7
SERVICE: Equipment - App'x B
18 DAC2CAL Coarse calibration of the DAC for TCXO.
Check that the telephone is correctly tuned to a channel
and that the RF signal is strong.
Press M & 0, and calibration is performed automatically.
The stored value is displayed.
Alternatively:
Press M & # to enable calibration and to display present
value.
Press v or w to change the value.
Press M & S to store the new value in EEPROM.
Note: The AFC operation mode (test no.15) must be set to
normal operation.
19 RX SAT Reads and displays the frequency of the received supervi-
sory audio tone (SAT).
Possible readings: 5970, 6000, and 6030.
The routine samples the SAT twenty times and will show
the most sampled SAT together with the number of valid
samples.
20 AUDIO Sets the audio paths in LINA.
0 : Both audio paths (ATMS & AFMS) disconnected
1 : Path out to handset (AFMS) disconnected;
into station (ATMS) connected
2 : Path out to handset (AFMS) connected;
into station (ATMS) disconnected
3 : Both audio paths (ATMS & AFMS) connected
(default condition).
21 HANDSET Sets the audio paths in the handset.
0 : Microphone and earphone OFF,
speaker OFF (default condition)
1 : Microphone and earphone ON, speaker OFF
2 : Microphone and earphone OFF, speaker ON
22 TX SAT Controls the SAT tone switch in LINA.
0 : 5970 Hz
1 : 6000 Hz
2 : 6030 Hz
3 : No SAT
4 : ON
5 : OFF
When the switch is on, it is also possible to adjust the soft
trimmer potentiometers in the LINA circuit:
Press M & # to enable calibration and to display present
value in the range from 00 to 0F.
Press v or w to change the value.
Press M & S to store the new value.
Note: Parameter no. 4 must be set (ON) before choosing
options 0-2 for adjustment.
Default conditions are 3: NoSAT and 5:OFF.
B-8
SERVICE: Equipment - App'x B
23 MANCHOUT Sets the data frames to be transmitted.
Permissible settings:
0 : OFF (Initial setting)
1 : All digital 1
2 : All digital 0
3 : A special frame is transmitted.
It is also possible to adjust the soft trimmer potentio-
meters in the LINA circuit.
The transmitter must be on (test #2) to transmit FFSK.
Press M & # to enable calibration and to display present
value in the range from 00 to 0F.
Press v or w to change the value.
Press M & S to store the new value.
24 MANCH IN Displays received data when # is pressed.
The current channel type is shown as well:
1 : Control Channel
2 : Voice Channel
25 VOLUME Sets the sound level of the speaker and earphone.
Possible values: 0-1-2-3-4-5-6-7
Lowest value: 0
Default value: 3
26 DTMF DTMF tones consist of a lower frequency in combination
with a higher frequency. The test enables you to listen to
either or both as follows:
Press 0 for the low frequency
Press 1 for the high frequency
Press 2 for both frequencies.
The tones are then generated when v and w is pressed.
With each new depression of v and w comes a different
tone. The display (num. field) shows to which key the tone
refers.
Keys with DTMF tones: 0 -9, *, #. Tone generation is dis-
abled when leaving the test option.
It is also possible to adjust the soft trimmer potentiometers
in the LINA circuit. Press M & # to enable calibration and
to display present value in the range from 00 to 1F.
27 TXSRC Control of TX Source switch in LINA. Nominal deviation.
0 : External TX source;
ATMS through-connected to LINA (default)
1 : Internal TX source (MIC SIGNAL).
The test option also enables you to adjust the soft trimmer
potentiometers in the LINA circuit. 0 prepares for adjust-
ment of the External, 1 for the Internal Mic Potentiometer:
Press M & # to enable calibration and display value in the
range from 00 to 1F.
Press v or w to change the value.
Press M & S to store the new value.
B-9
SERVICE: Equipment - App'x B
28 EARPIECE Controls the Earpiece Mute switch in the LINA circuit.
0 : Internal earpiece disconnected (default)
1 : Internal earpiece connected.
With earpiece connected the test option also permits adjust-
ment of the soft trimming potentiometer in the LINA cir-
cuit:
Press M & # to