Text preview for : 70457-WW-1.pdf part of MAKITA 70457-WW-1 MAKITA 70457-WW-1.pdf
Back to : 70457-WW-1.pdf | Home
TECHNICAL INFORMATION
Subject Change of Spindle Complete, Spiral Bevel Gear and Angle Head Set
70457
For Models BFL080F, BFL120F, BFL121F, BFL200F
Country All countries
Description The parts on the subject have been changed.
See illustration below for detail of the new parts.
Spiral bevel gear 9
Groove for distinction
from the current Quality of the gear material
and its heating treatment
have been changed.
Spindle portion have been modified.
Spindle complete
(The above illustration is square drive type.
The actual specifications may differ
from country to country.)
Interchangeability(I/C)
Item No. Current part Q'ty I/C New part Q'ty Note
Spindle A Complete
Spindle A Complete
028 9.5mm Square 1 1
153930-5
153441-0
Spindle B Complete
6.35mm E-form Spindle B Complete
028 1 1
153483-4 153931-3
Spindle C Complete
6.35mm C-form Spindle C Complete
028 1 1
153484-2 153932-1
Spindle D Complete
Spindle D Complete
028 8mm E-form 1 1
153933-9
153485-0
Spindle E Complete
8mm C-form Spindle E Complete
028 1 1
153486-8 153934-7
Spindle F Complete
6.35mm Square Spindle F Complete
028 1 1
153487-6 153935-5
Spiral Bevel Gear 9 Spiral Bevel Gear 9
003 1 1
227446-7 227469-5
Angle Head Set
BFL080F, BFL120F: F18 Angle Head Set
1 1
BFL121F, BFL200F: F10
193729-6 193975-1
Interchangeability mark ;
The arrow means that the new part can be substituted for the current.
Implementation
BFL080F, BFL120F, BFL121F: When the current parts run out
BFL200F: From March 2004 production