Text preview for : 2LW-002.pdf part of Kyocera 2LW-002 Kyocera Printer FS-3040-3140MFP SERVICEBULLETIN 2LW-002.pdf
Back to : 2LW-002.pdf | Home
Service Bulletin
SB Number: SB 2LW-002 Creation Date: 15/09/2010
Subject: Firmware upgrade
Model: FS-3040MFP/3140MFP
Phenomenon Error code C0180 may appear after replacing the main board.
Cause The above mentioned phenomenon occurs when the serial numbers stored in the engine and
main board do not match.
Solution Maintenance mode U004 (Setting the machine number) has been added, in order to change the
serial number in the engine board to the same number as in the main board.
Firmware
Type Program No. Check SUM Version Status Date Applicable models
ENGINE 2LW_1000.002.001 c43f 002.001 04/06/2010 FS-3040MFP/3140MFP
MAIN 2LW_2F00.003.001 ---- 003.001 ---------- FS-3040MFP
MAIN 2LX_2F00.003.001 ---- 003.001 ---------- FS-3140MFP
FAX 2H9_54000003003 ---- ------- ---------- FS-3140MFP
Classification Entire stock rework In-field modification at next visit In-field modification by case No modification necessary
Field measure When the above mentioned phenomenon occurs, please upgrade the firmware to the latest
version.
Serial numbers of affected machines
Type Serial number
FS-3040MFP Not available
FS-3140MFP Q8L0701556
The above mentioned changes have been applied to machines produced after the above mentioned serial number.
KMIS Service Department, Kyocera Mita Europe Page of A258 / SB 2LW-002