Text preview for : LW22A13WX_XEC.0000023047.E.07.pdf part of Samsung LW22A13WX XEC.0000023047.E.07 Samsung LCD TV LW22A13WX LW22A13WX_XEC.0000023047.E.07.pdf



Back to : LW22A13WX_XEC.0000023047. | Home

CONFIDENTIAL
4 Alignments and Adjustments
4-1 General Alignment Instuction
1. Usually, a color TV-VCR needs only slight touch-up adjustment upon installation.
Check the basic characteristics such as height, horizontal and vertical sync.
2. Use the specified test equipment or its equivalent.
3. Correct impedance matching is essential.
4. Avoid overload. Excessive signal from a sweep generator might overload the front-end
of the TV. When inserting signal markers, do not allow the marker generator to distort
test result.
5. Connect the TV only to an DC power source with voltage and frequency as specified on
the backcover nameplate.
6. Do not attempt to connect or disconnect any wire while the TV is turned on. Make sure
that the power cord is disconnected before replacing any parts.
7. To protect aganist shock hazard, use an isolation transformer.




LW22A13W 4-1
4 Alignments and Adjustments
CONFIDENTIAL
4-2 Factory Mode Adjustments
4-2-1 Entering Factory Mode
1. To enter "Service Mode" Press the remote - control keys in this sequence :
- If you do not have Factory remote - control




- If you have Factory remote - control




4-2-2 Factory Mode Tree




4-2 LW22A13W
4 Alignments and Adjustments
CONFIDENTIAL




LW22A13W 4-3
4 Alignments and Adjustments
CONFIDENTIAL
Memo




4-4 LW22A13W