Text preview for : RVC601 Deck.pdf part of Rolsen RVC601 Deck . Rare and Ancient Equipment Rolsen VCR Сервисные мануалы RVC601 Deck.pdf



Back to : RVC601 Deck.pdf | Home

S/M No.:T 30MECHA



Service Manual
VCR MECHANISM UNIT
(T30(T4)-MECHA DECK)




DAEWOO ELECTRONICS CO., LTD.
http : //svc.dwe.co.kr Mar. 2001
CONTENTS

1. ASSEMBLY DIAGRAM 2
2. DISASSEMBLY DIAGRAM & REPLACEMENT 5
3. MECHANICAL ADJUSTMENT 12
4. ADJUSTMENT OF TAPE TRANSPORT SECTION 14
5. EXPLODED VIEW 19
6. PARTS LIST 23




1
1. Assembly diagram
1-1. DECK Assembly diagram
A. Upper View




Fig.1.1

1 MAINBASE ASS'Y 9 IDLER PLATE TOTAL ASS'Y 17 AC HEAD ASS'Y
2 DRUM ASS'Y 10 T BRAKE ASS'Y 18 T SLANT POLE ASS'Y
3 FE HEAD 11 FL RACK 19 HEAD CLEANER
4 S SLANT POLE ASS'Y 12 RELAY LEVER
5 TENSION BAND ASS'Y 13 CAPSTAN MOTOR
6 S BRAKE ASS'Y 14 LC BRKT ASS'Y
7 S REEL TABLE 15 PINCH LEVER TOTAL ASS'Y
8 REEL BRKT TOTAL ASS'Y 16 CAM GEAR


2
B. Bottom View




Fig.1.2

20 L LOADING ASS'Y
21 R LOADING ASS'Y
22 CONNECT PLATE
23 REEL BELT
24 LOADING RACK




3
1-2. FRONT LOADING Assembly diagram




Fig.2


1 FL BRKT L 5 CST HOLDER AS
2 TOP PLATE 6 DOOR OPENER
3 SAFETY LEVER 7 SAFETY LEVER R
4 LOADING LEVER AS4 8 FL BRKT R




4
2. DISASSEMBLY AND REPLACEMENT
2-1. Removal of the FRONT LOADING Ass'y 2-2. Disassembly of FRONT LOADING Ass'y
(Fig. 3.1) (FIg. 3.2~3.5)
NOTE: a. Remove the washer holding the door opener and separate
F/L Assembly by moving the DOOR OPENER in the
Remove the FRONT LOADING Ass'y in eject mode. direction of arrow.
b. Remove the 2 screw holding the TOP PLATE and sepa-
a. Unscrew the 2 screw holding the F/L ass'y. rate the CASSETTE HOLDER Ass'y by moving the FL
b. Separate the F/L Ass'y from the MAINBASE ass'y by BRKT L and FL BRKT R in the direction of arrow. (Fig.
lifting the rear part of F/L (Screw Hole). 3.2)




Fig. 3.1 Removal of the FRONT LOADING Ass'y



FIg. 3.2 Disassembly of the FRONT LOADING Ass'y




5
c. Separate the LOADING LEVER Ass'y by pressing the 2-3. Disassembly of DRUM Ass'y (Fig. 3.5)
connection point from the CASSETTE HOLDER Ass'y.
(Fig. 3.4) a. Turn over the DECK MECHANISM and holding the
DRUM TOTAL Ass'y @ with hands, remove the 3
d. Remove the SAFETY SPRING connecting the SAFETY screw holding the drum total assembly with mainbase.
LEVER and CASSTTE HOLDER PLATE. (Fig. 3.3)
b. Separate the DRUM TOTAL Ass'y from the deck paying
e. Remove the RELEASE SPRING connecting the attention there is no damage on the surface of VIDEO
RELEASE LEVER and SAFETY LEVER. (Fig. 3.3) HEAD and DRUM.
c. Assemble in the reverse order of disassembly.

CAUTION: