ENG.PDF part of LG L1717S-8 ENG.PDF, USER MANUAL text manual preview

Text preview for : ENG.PDF part of LG L1717S-8 USER MANUAL

Back to : ENG.PDF | Home

User's Guide

L1717S

Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.

See the label attached on the product and quote this information to your
dealer when you require service.

Important Precautions
This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing.

On Safety
Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. If the power cable is faulty in any way, please contact the manufacturer or the nearest authorized repair service provider for a replacement. The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer. Overloaded AC outlets and extension cords are dangerous. So are frayed power cords and broken plugs. They may result in a shock or fire hazard. Call your service technician for replacement. Do not Open the Display. There are no user serviceable components inside. There are Dangerous High Voltages inside, even when the power is OFF. Contact your dealer if the display is not operating properly. To Avoid Personal Injury : Do not place the display on a sloping shelf unless properly secured. Use only a stand recommended by the manufacturer. To Prevent Fire or Hazards: Always turn the display OFF if you leave the room for more than a short period of time. Never leave the display ON when leaving the house. Keep children from dropping or pushing objects into the display's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this display. During a lightning storm or when the display is to be left unattended for an extended period of time, unplug it from the wall outlet.

A1

Important Precautions On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage. Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation. If these openings are blocked, built-up heat can cause failures which may result in a fire hazard. Therefore, NEVER: Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc. Place the display in a built-in enclosure unless proper ventilation is provided. Cover the openings with cloth or other material. Place the display near or over a radiator or heat source. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently. Do not press the LCD screen with your finger for a long time as this may cause some afterimages. Some dot defects may appear as Red, Green or Blue spots on the screen. However, this will have no impact or effect on the display performance. If possible, use the recommended resolution to obtain the best image quality for your LCD display. If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen. However, this is characteristic of the fixed-resolution LCD panel.

On Cleaning
Unplug the display before cleaning the face of the display screen. Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display screen because over-spraying may cause electrical shock.

On Repacking
Do not throw away the carton and packing materials. They make an ideal container in which to transport the unit. When shipping the unit to another location, repack it in its original material.

On Disposal
The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. A2

Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off.

Unfolding the stand base

1. Place the monitor with its front facing upward on a cushion or soft cloth.
Expand the stand base to its first step degree (70°), pulling it apart with two hands.

2.

Place the monitor with its front facing downward and then further expand the stand base fully to 90 degrees. Do not apply excessive force to expand the stand base over 90 degrees as it may damage the monitor.

3.

Place the monitor upright and adjust the angle of the stand base as desired. Adjust the stand base angle with two hands, holding the monitor head.

A3

Connecting the Display Folding the stand base

1.

Face the front of the monitor and push the monitor backwards, following the sequence shown in the picture. Be careful not to squash your hands while you fold the stand base.

This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not touch or apply force to the monitor screen while expanding or folding the stand base.

A4

Connecting the Display Using the Computer

1. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a proper power outlet that is easily accessible and
close to the display.
NOTE
This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. Power Cord Signal Cable Analog signal

D-sub

Varies according to model.

Wall-outlet type

1 2

PC-outlet type PC

MAC Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on thesupplied cable to a 15 pin 2 row connector.

3. Press
NOTE

button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.

` Self Image Setting Function'? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push the `AUTO/SET' button on the front panel of the monitor. Otherwise, you may execute the ` Factory reset' option on the OSD adjustment menu. However, be aware that this option initializes all the menu items except `Language'.

A5

Control Panel Functions Front Panel Controls

-

+

Control
MENU Button

Function
Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for 5 seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for 5 seconds. The message "OSD UNLOCKED" should appear.

- +

Buttons

Use these buttons to select or adjust functions in the On Screen Display. LightView hot key This feature lets you easily select the best desired DAY NIGHT image condition optimized to the environment (ambient illumination, image types etc). · DAY : Bright ambient illumination · NIGHT : Dark ambient illumination · TEXT : For text images (Word processing etc.) · MOVIE : For animation images in videos or movies · PHOTO : For pictures or drawings · NORMAL : This is under normal operating conditions

A6

Control Panel Functions
Control
AUTO/SET Button

Function
Use this button to enter a selection in the On Screen Display. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button before entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is 17 inch monitor : 1280x1024

Power Button Power Indicator

Use this button to turn the display on or off. This Indicator lights up green when the display operates normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to amber.

A7

On Screen Display (OSD) Control Adjustment Screen Adjustment
Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
NOTE Allow the display to stabilize for at least 30 minutes before making image adjustments.

To make adjustments in the On Screen Display, follow these steps:

MENU

-+

AUTO/SET

-+

MENU

Press the MENU Button, then the main menu of the OSD appears. To access a control, use the - or + Buttons. When the icon you want becomes highlighted, press the AUTO/SET Button. Use the

-+

Buttons to adjust the item to the desired level.

Accept the changes by pressing the MENU Button. Exit the OSD by Pressing the MENU Button.

A8

On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment, and setting menus.
Main menu PICTURE Sub menu BRIGHTNESS CONTRAST GAMMA COLOR PRESET 6500K 9300K RED GREEN BLUE POSITION HORIZONTAL VERTICAL TRACKING CLOCK PHASE SETUP LANGUAGE OSD
HORIZONTAL POSITION VERTICAL

Reference To adjust the brightness, contrast and gamma of the screen

To customize the color of the screen

To adjust the position of the screen To improve the clarity and stability of the screen To customize the screen status for a user's operating environment

WHITE BALANCE POWER INDICATOR FACTORY RESET : Adjustable

NOTE The order of icons may differ depending on the model (A9~A12).

A9

On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Menu Name
PICTURE

Icons

Sub-menus

Button Tip
MENU : Exit - + : Adjust (Decrease/Increase) SET : Enter : Select another sub-menu

NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual.

A10

On Screen Display(OSD) Selection and Adjustment
Main menu Sub menu Description

PICTURE
PICTURE

BRIGHTNESS CONTRAST GAMMA

To adjust the brightness of the screen. To adjust the contrast of the screen. Set your own gamma value. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images.

MENU : Exit - : Decrease + : Increase SET : Select another sub-menu

COLOR
COLOR

PRESET

Select the screen color. · 6500K: Slightly reddish white. · 9300K: Slightly bluish white. Set your own red color levels. Set your own green color levels. Set your own blue color levels.

RED GREEN BLUE MENU : Exit - : Decrease + : Increase SET : Select another sub-menu

POSITION
POSITION

HORIZONTAL VERTICAL

To move image left and right. To move image up and down.

MENU : Exit - : Decrease + : Increase SET : Select another sub-menu

A11

Main menu

Sub menu

Description

TRACKING
TRACKING

CLOCK

To minimize any vertical bars or stripes visible on the screen background.The horizontal screen size will also change. To adjust the focus of the display. This item allows you to remove any horizontal noise and clear or sharpen the image of characters.

PHASE

MENU : Exit - : Decrease + : Increase SET : Select another sub-menu

SETUP
SETUP

LANGUAGE OSD POSITION WHITE BALANCE

To choose the language in which the control names are displayed. To adjust position of the OSD window on the screen. If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. Use this function to set the power indicator on the front side of the monitor to ON or OFF. If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on. Restore all factory default settings except "LANGUAGE." Press the button to reset immediately.

MENU SETUP

-

+

SET

MENU

-

+

SET

MENU : Exit - : Adjust + : Adjust SET : Select another sub-menu

POWER INDICATOR

FACTORY RESET

If this does not improve the screen image, restore the factory default settings. If necessary, perform the white balance function again. This function will be enabled only when the input signal is an analog signal.

A12

Troubleshooting
Check the following before calling for service.

No image appears
Is the power cord of the display connected? Is the power indicator light on? Is the power on and the power indicator blue or green? Is the power indicator amber? Check and see if the power cord is connected properly to the power outlet. Press the Power button.

Adjust the brightness and the contrast.

If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. Try to turn on the PC. This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again. This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again.

Do you see an "OUT OF RANGE" message on the screen?

Do you see a "CHECK SIGNAL CABLE" message on the screen?

Do you see a "OSD LOCKED" message on the screen?
Do you see "OSD LOCKED" when you push MENU button? You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for 5 seconds: the message "OSD UNLOCKED" will appear.

A13

Troubleshooting
Display image is incorrect
Display Position is incorrect. Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display. Press the AUTO/SET button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. Make sure the video card is properly inserted in the slot. Set the color setting higher than 24 bits (true color) at Control Panel - Settings. Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Make sure the power voltage is high enough, It has to be higher than AC100-240V 50/60Hz.

On the screen background, vertical bars or stripes are visible.

Any horizontal noise appearing in any image or characters are not clearly portrayed.

The screen color is mono or abnormal.

The screen blinks.

A14

Troubleshooting
Have you installed the display driver?
Have you installed the display driver? Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lge.com. Make sure to check if the video card supports Plug&Play function.

Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?

A15

Specifications
Display 17 inches (43.2cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 17 inches viewable 0.264 mm pixel pitch Horizontal Freq. 30 - 83kHz (Automatic) Vertical Freq. 56 - 75Hz (Automatic) Input Form Separate TTL, Positive/Negative Composite TTL Positive/Negative SOG (Sync On Green) Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7Vp-p/75ohm) Max VESA 1280 x 1024@75Hz Recommend VESA 1280 x 1024@60Hz DDC 2B 35W On Mode Sleep Mode 1W Off Mode 1W Full Up Position Folded Position

Sync Input

Video Input Resolution Plug&Play Power Consumption Dimensions &Weight (with tilt stand)

Tilt Range Power Input Environmental Conditions

Tilt Stand Signal cable Power cord

Width 38.61 cm / 15.20 inches 38.61cm / 15.20 inches Height 38.35 cm / 15.09 inches 44.0 cm / 17.32 inches Depth 19.0 cm / 7.48 inches 6.6 cm / 2.55 inches Net 4.4 kg (9.70 lbs) Tilt 0°~20° AC 100-240V~ 50/60Hz 1.0A Operating Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 95 % non-Condensing Attached( O ), Detached ( ) Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type

NOTE Information in this document is subject to change without notice.

A16

Specifications
PRESET MODE
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)

1 2 3 4 5 6 7 8 9 10 11 *12 13

VGA VGA VGA VESA VESA VESA MAC VESA VESA MAC VESA VESA VESA

640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024

31.469 31.468 31.469 37.500 37.879 46.875 49.725 48.363 60.023 68.681 61.805 63.981 79.976

70 70 60 75 60 75 75 60 75 75 65 60 75 *Recommend Mode

Indicator
Mode On Mode Sleep Mode Off Mode LED Color Green Amber Off

A17

Specifications - Optional
VESA wall mounting Connected to another object (stand type and wallmounted type. This monitor accepts a VESAcompliant mounting interface pad.- optional) For further information, refer to the VESA Wall Mounting Instruction Guide.

Kensington Security Slot- optional Connected to a locking cable that can be purchased separately at most computer stores

A18

Digitally yours

A19