Text preview for : 203-205.PDF part of Hasselblad 203FE, 205FCC, 205TCC Service Manual Victor Hasselblad AB - pag. 55
Back to : _film_camera_6x6_6x4.5_.z | Home
203FOMSL.EPS 203FE, omslag
Service Manual
SVART
960130
May 1997
Victor Hasselblad AB
Göteborg Sweden
Copyright © 1997 by Victor Hasselblad AB. All rights reserved. No parts of this material may be reproduced, stored in retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopy, recording, or ANDERS ENGSTRÖM otherwise, without the prior written permission of the Company.
COPYRIGHT © 1996
ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031- 96 84 64
Contents list Camera body 203FE - 205FCC - 205TCC
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22.
Revision 0
General description Specifications Checks & Adjustments Tools & ServiceTest System Exploded view: Shell Exploded view: Control panel, mechanics Exploded view: Control panel, electronics Exploded view: Display flex and main circuit board Exploded view: Contact flex and transport mechanism plate Exploded view: Transport mechanism plate Exploded view: Front bayonet plate Exploded view: Curtains and rear plate Exploded view: Mirror assembly Exploded view: Display prism and fucusing screen Exploded view: Chassis Exploded view: Reflection protectors Exploded view: Bottom mechanism plate, mechanics Exploded view: Bottom mechanism plate, brakes Exploded view: Bottom mechanism plate, electronics Exploded view: Spring housing Exploded view: Winding crank Exploded view: Winding crank - modified from May 1997
May 1997
Related Service Infos 203FE - 205FCC - 205TCC 03/92 05/92 04/93 05/93 12/93 13/93 21/93 09/94 10/94 03/95 05/95 14/95 19/95 24/95 28/95 01/96 03/96 12/96 04/97 13/98 08/99 13/99 01/00
Revision 3
1.
New Service Manual Service Manual 205TCC System Components Some more hand tools are now available The release button and buffer have recently been modified - 205TCC Just for your information Hasselblad 205TCC Camera body 205TCC and Magazine TCC The control panel has recently been redesigned - 205TCC New camera body - 203FE New tool - Support 904020 New tripod foot - 203FE Mirror and focusing screen adjustment 200 series cameras New camera body - 205FCC Incorrect spare part number - 205TCC New tool - Adapter 904759 Contact flex modified - 203FE Driving arm failed to latch - 203FE and 205FCC Tripod foot adapter/kits Light seal foil modified - 200 series cameras New Service Manual - 203FE, 205FCC and 205TCC New control panel - 205TCC Modified parts - 200 series cameras New CD-ROM - Version 1.2
January 2001
Related Service Infos 203FE - 205FCC - 205TCC 14/00 01/01 04/01 2.
Discontinued parts - 200 series cameras Modified magazine hook - 203FE and 205FCC New CD-ROM - Version 2.0
Revision 0
January 2001
General description 1:1 Camera body 203FE - 205FCC - 205TCC
Design: Medium format single reflex camera with built-in TTL selective meter electronically connected to FE lenses and E magazines. Interchangeable lenses, film magazines, viewfinders and focusing screens.
Shutter: (203FE/205FCC)
Electronically controlled mechanical focal plane shutter with release solenoid system. Horizontally running textile curtains. Shutter speed range 90 s - 1/2000 s and B. In manual mode up to 34 minutes. Fully mechanical C setting for lenses with built-in leaf shutters. Flash synchronization at all speeds from B to 1/90 s.
Shutter: (205TCC)
Electronically controlled mechanical focal plane shutter with release solenoid system. Horizontally running textile curtains. Shutter speed range 16 s - 1/2000 s and B. Fully mechanical C setting for lenses with built-in leaf shutters. Flash synchronization at all speeds from B to 1/90 s.
Lens mount:
Hasselblad bayonet mount for FE, F, CF and C lenses. Contacts for data-bus communication with the FE lenses.
Viewfinder:
Focusing hood with 4 x magnifier, interchangeable with magnifying hood and prism viewfinders with or without exposure meter. Acute-Matte focusing screen interchangeable with other Hasselblad focusing screens. Illuminated flash and warning symbols.
Display:
LCD display with all relevant exposure and operational data. Switch-controlled low light illumination.
Winding & film advance:
Manual single turn winding crank. Simultaneous shutter cocking and film advance. The crank is interchangeable with the Hasselblad Winder for a frame rate of up to 1.3 fps.
Revision 0
May 1997
General description 1:2 Camera body 203FE - 205FCC - 205TCC
Exposure meter: (203FE) TTL metering at full aperture with FE lenses. High sensitivity silicon photocell. Selective meter area approximately 20% of the image area. Metering range EV 0.5 to EV 21.5 at ISO 100/21° and f 2.8. Activated 16 s after release of any operational button.
Exposure meter: (205FCC/205TCC)
TTL metering at full aperture with FE lenses. High sensitivity silicon photocell. Spotmeter area approximately 1% of the image area. Angle of view from approximately 1° to 7° depending on the lens focal length. Metering range EV -1 to EV 20 at ISO 100/21° and f 2.8. Activated 16 s after release of any operational button.
Exposure functions: (203FE)
Aperture priority automatic exposure, automatic flash control and full manual control. Exposure compensation ± 5 EV in 1/3 EV increments. AE-lock.
Exposure functions: (205FCC/205TCC)
Aperture priority automatic exposure, automatic flash control and full manual control. Exposure compensation ± 5 EV in 1/4 EV increments. AE-lock.
Operating modes: (203FE)
Programming, Automatic bracketing, Differential, Automatic and Manual mode.
Operating modes: (205FCC)
Programming, Automatic bracketing, Differential, Zone and Manual mode.
Operating modes: (205TCC)
Automatic, Programming, Differential, Zone and Manual mode.
Film speed range:
ISO 12/12° - 6400/39°, selected with film speed dial on E and CC magazines or set in programming mode.
Revision 0
May 1997
General description 1:3 Camera body 203FE - 205FCC - 205TCC
Flash control: (203FE/205FCC) Center weighted TTL/OTF flash exposure meter. Full dedicated flash control with inhibited flash triggering at shutter speeds faster than 1/90 s. Flash control film speed range ISO 25 - 1000.
Flash control: (205TCC)
Center weighted TTL/OTF flash exposure meter. Full dedicated flash control with automatic shutter speed reset to 1/90 s at faster speed settings. Inhibited flash triggering at shutter speeds settings faster than 1/90 s with non-dedicated flash units. Flash control film speed range ISO 25 - 1000.
Self timer:
Default delay 10 s. Programmable delay in 12 steps from 2 s to 60 s.
Battery:
6 volt, type PX28 Lithium.
Tripod mount: (203FE/205FCC)
Quick coupling plate with 1/4" and 3/8" socket thread.
Tripod mount: (205TCC) External dimensions: (203FE/205FCC)
Quick coupling plate with 1/4" socket thread.
91L x 118W x 110H (3 9/16 x 4 21/32 x 4 1/32 in).
External dimensions: (205TCC)
91L x 118W x 108H (3 9/16 x 4 21/32 x 4 1/4 in).
Weight:
745 g.
Revision 0
May 1997
Specifications 2:1 Camera body 203FE - 205FCC - 205TCC
Focal length: 71.4 mm ± 0.03 mm
Front key angle:
Cocked position Overtravel
8° - 9° 3 Ncm 12° - 14° 14 Ncm
Front gear:
Pre-tension of spring
3 turns (released position)
Magnets:
Minimum hold
2 Ncm
Shutter:
Accelerating stretch Slot Travel times Speeds 1 sec - 1/60 Speeds 1/90 - 1/2000
6.5 - 8.1 mm 0.2 - 1.0 mm 9.5 - 9.7 ms at 1/2000 s (0 ± 0.07 ms) ± 0.1 EV ± 0.3 EV
Light meter:
All settings
± 0.3 EV
Flash meter:
All settings
± 0.3 EV
Flash sync:
Delay
0 - 0.20 ms
Current consumption:
On Off
max 10 mA at 5.6 V max 20 uA at 5.6 V
Revision 0
May 1997
Specifications 2:2 Camera body 203FE - 205FCC - 205TCC
PPS = Pressure point switch Makes when the release button is pressed to the pressure point. Activates the camera. A pre-locked light value is unlocked when the button is released.
Switch functions
LRS = Late release switch Makes when the release button is fully pressed. Starts together with PPS an exposure.
HPS = Home position switch Makes when the camera is fully cocked. Indicates together with FSS that the camera is tensioned. If HPS is open, the camera can not be activated.
FSS = First curtain sync switch Will be switched off when the first curtain is released. Indicates together with HPS that the camera is tensioned. If FSS is open, the camera can not be activated.
SSS = Second curtain sync switch Will be switched off when the second curtain is released. Must be closed, otherwise the warning function: Lo Flash and Hi Flash in C-mode will not work.
FKS = Front key switch Makes when the camera is tensioned. Is switched off when the mirror goes up and at that time also prevents new light values to be stored. If FKS is not switched off the selftimer does not work.
MRS = Mirror release switch Makes when the mirror release button is fully pressed. When the button is pressed once more, the selftimer starts. In B-mode the second curtain will be released when MRS is switched off.
ELS = Exposure lock switch Activates the camera when pressed. When released, a light value is stored.
Revision 0
May 1997
Specifications 2:3 Camera body 203FE - 205FCC - 205TCC
AS+ = Adjustment switch + Exposure compensation etc.
Switch functions
AS- = Adjustment switch Exposure compensation etc.
VFS = View finder switch
Is switched off when a prism finder is mounted on to the camera and at the same time mirror turns the display. 203SWTC BLS = Back light switch ON/OFF display illumination.
FSS SSS
HPS LRS BLS
TC1.EPS
960201
VFS
PPS
COPYRIGHT © 1996 ANDERS
MRS ELS AS+ FKS AS-
ANDERS ENGSTRÖM, ILLUST Östra vägen 46 430 91 HÖNÖ TEL/FAX
Revision 0 1996 ANDERS ENGSTRÖM
May 1997
TRÖM, ILLUSTRATÖR TEL/FAX 031-96 84 64
Checks & Adjustments 3:1 Camera body 203FE - 205FCC - 205TCC
Link to: VHABSTS
CAUTION! When handling the circuit boards a grounded bench mat and a wrist strap must be used to prevent ESD damage. Carry out the following checks/adjustments when a camera body is reassembled after a repair. Note! Point 1 - 7 without camera shell.
1. The camera body focal length is checked by using the gauge V-2229 together with the ruler and indicator clock. The focal length is 71.40 mm ± 0.03 mm. Adjustment slots on the chassis and the bottom mechanism plate. Secure the camera in the gauge V-2229 by the adapter 904759. Check the 45º mirror angle with the sighting tube. The image seen, should be symmetrical. Adjust, if necessary, the four supports in the mirror box by using the tools 901046 (front supports) and 904018 (rear supports). Check the flatness of the screen. Use the screen adapter V-4705 and the ruler with the indicator clock. The same measurement should be obtained at all four corners. Adjust, if necessary, by the four screws (Pos No. 28, page 15). After the screen is correctly levelled the height must also be checked. Use the collimator V-4151, the screen adapter V-4705 and the microscope V-2236. The image seen in the microscope should be the red line central between the two green lines. Recheck the flatness. Use the tool 902658 or V-2075/2151 for checking of the front key angle. Adjust if necessary. Cocked position 8° - 9° 3 Ncm. Overtravel 12° - 14° 14 Ncm. Temporarily fit the control panel to the camera body and secure it with a piece of tape. Use the nut driver 903755 or 903474. Connect the camera body to the Service Test System and go through all checks in the given order according to the 203/205 menu. Note! pos. 7:1 to 7:7 without sensor head and light source. CAMERA STATUS. Make sure all switches are working properly. Note! The speed ring in C-position. If the contact flex has been removed at any time, the timing between the pre-release switch (PRS) and the mirror must be checked. Mount the test shell, 905002, with four screws. Fit the exposure gauge V-2354 in the release button and slowly rotate the micrometer clockwise and observe when the mirror is released. At the same time (not before) the PRS should change from "open" to "closed" on the screen. A slight delay is acceptable. This corresponds to 1.5 divisions on the scale. Adjust, if necessary, by altering the position of the rear section of the contact flex
Revision 3 February 2000
2.*
3.*
4.*
5.
6.
7.
7:1
Checks & Adjustments 3:2 Camera body 203FE - 205FCC - 205TCC
containing the PRS. Untighten the two screws (Pos. No. 12, page 9) and carefully change the position of the flex in the direction required. Tighten the screws and recheck. 7:2 PANEL. Check the control panel functions. 7:3 SPEED RING. Make sure all speed ring settings are indicating correctly. 7:4 DISPLAY. Check the display indications. Note! To get the flash indicator to light up, the sync cable must be connected. 7:5 CURRENT. Check the consumption (max. 10 mA at 5.6 volt) and the drain (max. 20 uA at 5.6 volt). 7:6 LENS. Check the communication between a lens and the camera body. (F-stops) 7:7 MAGAZINE. Check the communication between a magazine and the camera body. 7:8 SHUTTER. Start by adjusting the travel times. Use 1/2000 sec. and adjust the spring housing until both curtains have a speed between 9.5 - 9.7 ms. (0 ± 0.07 ms). At this point, also make a final adjustment of the braking mechanism if necessary. The brake is checked as follows: Release the camera. Rotate the 2nd shutter gear (Pos No. 25, page 17) and count the number of times the catch (Pos No. 4, page 18) and the brake plate (Pos No. 3, page 18) engage. (Min. 4 times). For an adjustment use the nut driver 903755 or 903474. (See page 3:4). Check/adjust the speed 1/2000 sec. Use the "shutter speed" potentiometer for an adjustment. (See page 3:4). Max. deviation ± 0.3 EV. Check the speed 1/1000 sec. Max. deviation ± 0.3 EV. 7:9 LIGHT METER. Check/adjust the light meter. Use the "light meter" potentiometer for an adjustment. (See page 3:4). Max deviation ± 0.3 EV. Do not use any other light output except EV 15, since the camera is not built in to the shell. 7:10 FLASH SYNC. Check/adjust the flash sync. The delay is adjusted to 0 - 0.20 ms by altering the position of the first sync contact. (See page 3:4). 7:11 FLASH METERING. Check/adjust the flash meter. Use the "flash meter" potentiometer for an adjustment. (See page 3:4). Max. deviation ± 0.3 EV. Use the setting ISO 100 and light output EV 15. 7:12 C-POSITION. Check/adjust the C-position. It is adjusted by extending/shortening the release arm 103389. (See page 3:4).
Revision 1 June 1998
Checks & Adjustments 3:3 Camera body 203FE - 205FCC - 205TCC
8. Remove the control panel. Make sure the four centering screws (Pos. No. 16 and 19, page 11) are screwed in and put the camera body in to the shell. Do not forget the pre-release button. After aligning the rear plate/shell tighten the two rear screws (Pos No. 32, page 5) and adjust, if necessary, the horizontal relationship between the speed ring and the shell by the screws (Pos No. 16, page 11) which are accessible through the shell.
9.
10. Adjust the vertical relationship between the speed ring and the shell by the screws (Pos No. 19, page 11) which are accessible through the shell and then tighten the two front screws (Pos No. 34, page 5). 11. Check the upper edge alignment of rear plate and shell. Adjust, if necessary, by the two screws (Pos No. 31, page 9) which are accessible through the shell . Note! The rear edge of the shell must not protrude over the rear plate at any point. 12. Remount the control panel, the winding crank mechanism, the tripod foot, the speed ring grip and the inner cover. (The inner cover by using the tool 901061). 13.* When the camera body is fully reassembled, recheck the focal length, the 45° mirror angle and the screen position. 14. Connect the camera body to the Service Test System once again and go through all checks once more. Minor adjustments are sometimes necessary to make. At this stage, it is also possible to use different light outputs when checking the light and flash meter since the camera body is mounted in to the shell.
* The 200 series cameras are built slightly different from the 500 series cameras concerning the focusing screen adjustment. Due to the use of high precision test equipment at the assembly line, deviations from perfect 45º mirror angle is compensated for when adjusting the focusing screen position. Doing so we assure minimum focusing differences over the full image format between the images on the focusing screen and on the film. The result of the factory screen adjustment is, that the screen position may not be totally horizontal when tested in the gauge V-2229. This is still quite in order. When servicing the 200 series cameras we recommend not to change the mirror angle, provided it is in tolerance when checked with the sighting tube in gauge V-2229. Deviations from perfect 45º angle has already been accompanied by nonhorizontal focusing screen position. However, if the mirror angle is out of tolerance, adjustment has to be made using the current procedures. (Service Info No. 14/1995)
Revision 1 June 1998
Checks & Adjustments 3:4 Camera body 203FE - 205FCC - 205TCC
203FADJM.EPS 203FE, adjustments
960130
Curtain brakes
Sync contacts
2nd curtain drive spring 1st curtain drive spring
+
+
+
C-position
+
Shutter speed 1/2000 sec
+
Light meter
+
Flash meter
COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
Revision 0
May 1997
Checks & Adjustments 3:5 Camera body 203FE - 205FCC - 205TCC
Magnet hold capability The magnet hold capability can be checked according to the diagram below. A suitable scale, like the ZZ88, should be used. When measuring, it must indicate minimum 2 NCM (200 gram) before each latching lever is released. If indicating less then 2 NCM, the magnets should be cleaned and then rechecked. If still less then 2 NCM after cleaning the Bottom mechanism plate, compl. (Part No. 105028) must be changed. Magnets and latching levers are not available as spare parts due to sensitive calibration procedures.
1
50
200 200 GRAM 250 250
50 1
1
VHAB Tool No. = ZZ88, Scale
The magnets can be released from the main circuit board when troubleshooting. Use an external DC power supply and apply 5 volt to the test points indicated. Do not forget the grounding.
Magnet 2
Revision 0
1
Magnet 1
May 1997
Tools 4:1 Camera body 203FE - 205FCC - 205TCC
Tool No.
V-2211
Description
Pin driver
Used for
Fitting the locating pin in the front plate and the front gear bracket
V-2229
Focal length gauge
Adjustment of the focal length, the mirror 45ºangle and the focusing screen
V-2236
Microscope
Focusing screen adjustment
V-2354
Exposure gauge
Adjustment of the timing between the pre-release switch (PRS) and the mirror
V-4151/52
Focusing tester
Focusing screen adjustment
V-4705
Focusing screen adapter
Focusing screen adjustment
901 044
Centering pin
Positioning the front gear bracket
901 045
Centering pin
Positioning the front gear bracket
901 046
Bender
Adjustment of the mirror 45º angle
901 061
Mounting tool
Mounting the inner cover
902 658
Key angle gauge
Adjustment of the front key angle
903 282
Key
Securing a nut on the bottom plate
903 570
Shutter gear holder
Securing the shutter gears when fitting the curtains
Revision 0
April 1998
Tools 4:2 Camera body 203FE - 205FCC - 205TCC
Tool No.
903 630
Description
Bender
Used for
Adjustment of the late release switch
903 755
Nut driver
Fitting the control panel and the contact flex to the main circuit board
903 940
Key
Cocking the curtains before the intermediate gear is fitted
904 018
Bender
Adjustment of the mirror 45º angle and the auxiliary mirror position
904 020
Supporting tool
Protecting the control panel and the main circuit board when working on the right hand side of the camera
904 759
Adapter
To be used in combination with focal length gauge V-2229
905 002
Test shell
Adjustment of the timing between the pre-release switch (PRS) and the mirror
970 600
Service Test System
See page 4:3
905 138
Light box
See page 4:3
(optional)
ZZ89
Driver
To tighten the special type allen screw holding the chassis and the front plate together
Revision 0
April 1998
Tools 4:3 Camera body 203FE - 205FCC - 205TCC
The PC based Service Test System has been developed for testing the 200 series cameras in Hasselblad authorized service centres. In addition it can be used for testing some functions on the 500 and 2000 series cameras and in the PME viewfinder. The Service Test System contains the following:
970 663 970 630 970 610 663 83 970 711 970 649 970 648 55034/23 Diskette (3.5") containing the software PC-board (full length ISA) Sensor Protective cover for Sensor Extension tube Battery compartment cable Sensor cable Sync cable Instruction manual
Additional components required are the following: Light box with LV15 capability - for instance Hasselblad 905 138 PC - IBM compatible Planar FE80 mm lens Planar CF80 mm lens
VHABSTS.EPS
960130
Revision 0
April 1998
COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
203FE - 205FCC - 205TCC
48 5 2 1 3 4 6 7 8 48 9 10
5
BOD20301.EPS
960130
47
11 46
12 13 13 45 19 18 14 15 16 20 28 29 27 21 25 26 24 22 23 36 37 35 31 34 52 49 33 32 = Loctite 243 = Loctite 480
COPYRIGHT © 1996 ANDERS ENGSTRÖM
44 43 42
30
17
39
40
41
38
205TCC
54
53
50
51
49
= Loctite 638ILLUSTRATÖR ANDERS ENGSTRÖM,
Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
Revision 0
May 1997
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 48 48 49 50 51 52 53 54
Revision 0
5
Remark
Part No. 105026 (black)
Spare Part No.
105 025 12 978 815 604 809 120 13 907 13 906 835 001 105 475 13 466 13 190 -1 105 511 105 365 103 536 105 498 103 510 103 509 105 357 103 413 105 935 829 304 105 509 105 432 107 390 105 874 105 862 831 502 103 387 103 388 22 514 40 387 103 419 829 760 30 763 820 781 30 762 105 872 30 760 105 870 810 620 103 424 105 437 105 953 13 139 103 507 103 508 105 876 105 956 107 453 105 958 105 547 829 845 103 349 820 781 829 760 103 846 105 514
Description
Shell, complete (chrome) Plate Spring Steel ball Holder, left Holder, right Pin Leather Strap button Name plate Leather Display window Index Bushing Leather Leather Bushing Spacer Strap button Screw Leather Plate Grip Tape Leather Rivet Bayonet Spring Reflection protector Support plate Pre-release Screw Tripod foot Screw Support, right Tape Support. left Tape Spacer Spring Release button Buffer Lens release button Leather Leather Tape Grip Name plate 203FE Name plate 205FCC Name plate 205TCC Screw Slide Screw Screw Tripod socket Spacer 205TCC " " " " " "
1 2 2 2 1 1 2 1 1 1 1 1 2 1 1 1 1 1 1 6 1 1 1 1 1 2 1 1 1 1 1 8 1 2 1 1 1 1 2 1 1 1 1 1 1 1 1 2 2 2 8 1 2 2 1 1
May 1997
203FE - 205FCC - 205TCC
BOD20302.EPS
960130
6
1
2 18 17 16 25 15 14 13 5 20 24 23 22 11 8 9 = 3 pcs double-sided tape
COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
3
4
21 12 10
19
7 6 4
Revision 0
May 1997
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 1 1 1 3 1 1 2 1 1 2 1 1 1 1 1 1 1 2 1 1 2 1 3 2 2 2 2
6
Remark
Spare Part No.
103 043 22 470 820 645 105 513 103 536 829 335 105 512 105 304 105 536 105 127 105 522 107 456 105 914 105 955 107 464 105 119 809 020 815 510 105 369 815 507 105 374 105 520 105 765 105 833 810 639 105 521
Description
Battery Battery compartment Socket cap Screw Leather Index Screw Leather Cover Indicator Adjustment button Ring Mode sign 203FE Mode sign 205FCC Mode sign 205TCC Tape Mode selector Steel ball Spring Display button Spring Plate Screw Nut Spring washer Washer Screw
6 volt, type PX28 Lithium
14 15 16 17 18 19 20 21 22 23 24 25
Revision 1
September 1999
203FE - 205FCC - 205TCC
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
7
BOD20303.EPS
970206
10 11 9 8 3
12 2 3 4
5 7 6
1
= Solder points
Revision 0
May 1997
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 1 1 2 1 1 1 2 1 1 2 1 1
7
Remark
Spare Part No.
105 021 107 394 105 861 828 301 105 524 105 918 105 622 107 405 105 896 105 916 105 866 105 520
Description
Control panel Sync terminal Soldering tag Nut Circuit board Holder Screw Insulation tape Insulation plate Insulation plate SCA flex Screw
Mode sign not incl. Plain
Revision 1
September 1999
203FE - 205FCC - 205TCC
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
8
BOD20304.EPS
970205
6 5 4 3 1 2 7 8 9 11 12 13 14 15 16 10 17
BLACK WHITE RED
18
19 20
21
9 24
22 23
29 30 31 32 28 33 27
26 8 24
1 9 25
= Loctite 225
Revision 0 May 1997
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 2 2 1 1 1 2 1 3 4 1 1 1 1 1 1 1 1 3 1 2 1 2 2 2 1 1 1 1 2 1 1 1 1
8
Remark
Spare Part No.
820 439 820 440 105 430 815 614 107 449 810 542 105 154 105 834 105 833 105 931 107 906 107 444 820 430 815 862 105 430 820 480 105 047 810 634 105 883 105 842 107 103 821 615 107 421 105 932 105 765 105 625 105 861 810 407 826 008 105 772 105 403 105 431 105 306
Description
Screw Screw Bushing Spring Display contact Washer Support Washer Spring washer Washer Reflection protector Front key switch Screw Spring Bushing Screw Display flex Spacer Insulation foil Spacer Main circuit board 203FE Screw O-ring Washer Nut Support Soldering tag Locking washer Screw Ring Lens Filter Housing
Alternatively none or 2 pcs 810542 - 810545
Part No. 107468 for 205FCC Part No. 105860 for 205TCC
Revision 0
May 1997
203FE - 205FCC - 205TCC
9
BOD20305.EPS
960130
23 24
28 27
29
30 19 22 21 20 19 18 25 25 26 31
13 17 14 12 11 15 16
9 8 7 5 4 3 2 1 6
10
= Loctite 243
COPYRIGHT © 1996 ANDERS ENGSTRÖM
Revision 0
ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
May 1997
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 1 1 3 1 1 1 2 1 1 2 2 1 1 1 1 1 1 3 1 1 1 1 1 3 1 1 1 2 2 2
9
Remark
Spare Part No.
822 606 105 669 815 807 829 640 821 664 105 766 105 750 830 620 829 150 105 769 820 325 830 020 815 511 105 412 105 057 105 360 810 601 817 119 830 235 105 448 105 105 822 436 103 472 103 471 829 435 105 832 105 831 816 717 810 542 820 440 820 490
Description
Screw Double exposure button Spring Screw Screw Coupling Insulation foil Screw Screw Cover plate Screw Screw Spring Screw Contact flex Cover plate Washer Clip Screw Holder Release arm Screw Eccentric Catch Screw Clip, lower Clip, higher Spring Washer Screw Screw
Alternatively none or 1 pc 810601 - 603, 607, 609
Old type, Part No. 105106
Alternatively none or 2 pcs 810542 - 810545
Revision 0
May 1997
203FE - 205FCC - 205TCC
BOD20306.EPS 10
960119
11 10
9
7 6 5
8 12
4
16 14 2 15
13
19 3 1 20 22 25 26 24 23 21
18
17
COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 Revision 0 430 91 HÖNÖ TEL/FAX 031-96 84 64
= Loctite 243
May 1997
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 1 1 1 1 2 2 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 1 1 1 1 1
10
Remark
Spare Part No.
105 670 828 901 103 482 103 231 817 119 103 228 810 940 103 498 105 053 810 948 105 677 814 859 830 025 103 473 105 110 816 763 817 115 103 136 821 730 816 512 830 216 103 247 103 620 814 312 817 112 105 108 105 039 Cam Nut Gear Gear Clip
Description
Gear Teflon washer, 0.15mm Ring Transport mechanism plate Teflon washer, 0.12mm Winding knob centre Spring Screw Disengagement tooth Arm Spring Clip Gear Screw Spring Screw Support Catch Spring Clip Gear, complete Transport mechanism plate Complete
Revision 0
May 1997
203FE - 205FCC - 205TCC
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031- 96 84 64
11
BOD20307.EPS
970205
10 9 8 7 12 11
13 2 5 4 3 31 32 33 15 17 37 38 35 36 43 44 42 45 21 34 18 20 19 47 48 46 49 64 50 52 63 62 53 56 61 16 29 30 28 14 22 23 6 26 25 24
1
27
40 41
39
51
54 55 56 58 = Loctite 225 = Loctite 243
Revision 1 January 2001
39 16
60 59
57
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53
Revision 1
11
Remark
Spare Part No.
809 020 815 507 822 434 105 415 105 363 105 499 105 944 105 134 826 002 103 414 103 438 820 425 103 773 105 455 823 435 829 435 107 408 823 635 811 101 103 045 820 440 812 202 830 225 810 405 107 430 820 430 105 454 816 858 810 409 103 440 105 107 823 440 836 107 107 367 810 702 103 352 105 525 810 506 817 115 820 435 105 120 103 556 810 702 816 860 103 124 105 745 105 817 831 120 103 355 816 756 103 442 103 441 814 609
Description
1 1 1 1 1 1 4 1 2 1 1 8 1 1 2 3 1 2 1 1 2 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 2 2 1 1 2 1 1 1 1 1 1 1 1 1 1
Steel ball Spring Screw Spring Catch Steel ball retainer Bayonet flange Speed ring Screw Grip Teflon tube Screw Teflon button Stop Screw Screw Bracket Screw Pin Centrifugal brake Screw Pin Screw Washer Mirror catch Screw Stopper Spring Spacer Lens catch Cover plate Screw Pin Key Washer Bracket Stop Washer Clip Screw Bevel gear Bevel gear Washer Spring Gear B-stop Release mechanism Pin Front key catch Spring Bearing Stop Spring
January 2001
For adjustment 810702 - 705
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
54 55 56 57 58 59 60 61 62 63 64 1 1 2 1 1 1 1 1 1 1 1
11
Remark
Spare Part No.
814 505 814 807 817 112 105 946 103 117 822 430 105 836 105 835 107 407 816 716 105 947 105 023
Description
Spring Spring Clip Release lever, rear Release lever, front Screw Spring Exposure catch Shaft Spring Release bridge Front bayonet plate, compl. Incl. Display flex, Part No. 105047
Revision 1
January 2001
203FE - 205FCC - 205TCC
12
BOD20308.EPS
960130
5 4 6 2 1 3 17 16 7 8 9 11 7 2 10
12 7
13 2 14 15
= Loctite 638
COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
Revision 0
May 1997
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1 6 1 2 1 1 3 1 1 1 1 1 2 2 1 2 1
12
Remark
Spare Part No.
22 423 829 535 107 359 103 854 103 837 103 080 103 839 103 858 105 933 103 838 103 079 103 081 829 316 830 620 105 301 105 943 103 735
Description
Magazine hook Screw Curtain set Screw Nut Holder Bearing Holder Screw Nut Holder Holder Screw Screw Rear plate Light seal Light seal
Please state serial No.
Revision 0
May 1997
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
BOD20309.EPS
203FE - 205FCC - 205TCC
12
13
14
970214
11 13
10 9
8 1
7 5 6 3
4
2
Revision 0
May 1997
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 1 2 1 1 1 1 4 1 1 1 1 1 1
13
Remark
Spare Part No.
107 044 108 409 814 319 108 904 105 438 105 889 105 128 817 115 105 929 105 930 107 903 107 904 107 901 107 902
Description
Mirror assembly 203FE Bushing Spring Reflection protector T-spring Bushing Mirror yoke Clip Back stop, right Back stop, left Reflection protector Reflection protector, right Reflection protector, left Reflection protector
Part No. 105044 for 205FCC/TCC
Revision 0
May 1997
203FE - 205FCC - 205TCC
14
BOD20310.EPS
960119
10
9 8 7
5
6
4 2 1
3
COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031- 96 84 64
Revision 0
May 1997
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 1 2 1 1 1 1 1 1 4 1
14
Remark
Spare Part No.
105 941 829 435 105 459 105 940 105 358 105 350 105 458 105 474 830 235
Description
Light seal Screw Light seal Light seal Display prism Prism holder Holder, right Holder, left Screw Acute-Matte D 203 Acute-Matte D 205
Sales code No. 42210 Sales code No. 42213
Revision 0
May 1997
203FE - 205FCC - 205TCC
15
BOD20311.EPS
970204
22
17
23 24 25 26
27 21 28 20 19
29 30 31 32 33 39 40 38 36 37 35
18 34 17
15 14 41 49 46 45 7 6 44 48 47 8 9 10 11 13 12 16
14 42
43
5 4 3 2 1
= Loctite 225
COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 TEL/FAX 031-96 84 64
= Loctite 243
430 91 HÖNÖ Revision 0
May 1997
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 1 2 1 1 1 1 1 1 1 4 4 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
15
Remark
Spare Part No.
107 399 103 404 825 660 107 416 105 923 103 556 810 618 821 407 103 200 103 199 816 754 105 741 816 755 817 112 103 453 105 942 830 235 105 130 105 022 829 535 103 583 107 372 810 315 107 365 816 816 103 545 103 576 829 330 103 578 103 118 103 401 814 714 103 407 105 887 816 760 810 619 814 901 105 707 105 756 814 501 817 115 105 757 810 210 105 109 816 514 105 863 817 119 103 495 816 613
Description
Light seal Gear Screw Eccentric Drive shaft Bevel gear Washer Screw Arm Release lever Spring Release lever Spring Clip Light seal Light seal Screw Screen frame Chassis Screw Foil, left Brake Washer Lever Spring Support Foil, right Screw Foil Screen support Flip-flop Spring Pivot Actuating lever Spring Spacer Spring Release lever Driving arm Spring Clip B-arm Washer Gear Spring Gear Clip Rubber stop Spring
Revision 0
May 1997
COPYRIGHT © 1997 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
BOD20317.EPS
203FE - 205FCC - 205TCC
16
1
970205
2 3
5 4 6 9 8 7
10
Revision 0
May 1997
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 1 1 1 1 1 1 1 1 1 1
16
Remark
Spare Part No.
105 133 105 531 108 801 108 802 103 696 103 453 108 804 108 803 103 698 105 125
Description
Light seal foil Reflection protector, left Reflection protector, left Reflection protector, left Reflection protector, left Light seal Reflection protector, right Reflection protector, right Reflection protector, right Inner cover
Revision 0
May 1996
203FE - 205FCC - 205TCC
31 30 29 28
17
BOD20312.EPS
960122
21 27 19 25 26 24 23 21 22
20
19 18 17 16 15 14 13 10 9 7 8 12 11
2 6 5
1 = COPYRIGHT ©225 ANDERS ENGSTRÖM Loctite 1996 = 430 91 HÖNÖ 243 TEL/FAX 031-96 84 64 Loctite
Revision 0 May 1997
ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46
3
4
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 1 1 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 1 1 1 1 1 1 1 2 3
17
Remark
Spare Part No.
105 049 810 557 829 316 103 687 829 425 829 535 814 312 103 389 105 742 103 445 817 112 814 608 103 390 103 132 103 446 103 850 810 618 103 126 814 313 814 710 107 447 810 317 810 525 105 920 105 706 105 702 105 703 105 705 103 851 103 849 828 402 105 028
Description
Mechanism plate Sleeve Screw Foil Screw Screw Spring Release arm Bushing Catch Clip Spring Release arm Cocking gear Spring Shaft Washer Shutter gear, 1st Spring Spring Spring Shrink sleeve Washer Guiding plate Shutter gear, 2nd Stop lever, 1st Stop lever, 2nd Bridge Support Locking plate Nut Bottom mechanism plate Complete
Alternatively none
Revision 0
May 1997
203FE - 205FCC - 205TCC
BOD20313.EPS
960122
18
1
2 3
4 7 5 6 8
9
10
11 12 13
= Loctite 243
COPYRIGHT © 1996 ANDERS ENGSTRÖM
Revision ILLUSTRATÖR ANDERS ENGSTRÖM,0 Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
May 1997
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 1 4 2 2 4 2 2 1 1 3 1 1 1
18
Remark
Spare Part No.
107 354 105 743 105 686 107 356 817 112 105 694 814 526 105 952 810 315 829 425 815 908 810 703 105 690
Description
Holder Brake disc Brake plate Catch Clip Link Spring Support Washer Screw Spring Washer Nut
Alternatively none
Revision 0
May 1997
203FE - 205FCC - 205TCC
19
BOD20314.EPS
960130
1
2 3
8 9 7 6 5 4 2 1 3 3 4 5 6 9 7 8 10
4
9
10
YELLOW GREEN BLACK
2 1
10
5
6 7
8
7
= Loctite 243
Revision 0
COPYRIGHT © 1996 ANDERS ENGSTRÖM
May 1997
ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 1 1 1 1 2 2 2 1 1 1
19
Remark
Spare Part No.
105 307 105 683 830 260 105 748 829 335 826 002 829 425 107 362 105 861 105 904 105 028
Description
Cover Cover Screw Late release switch Screw Screw Screw Sync switch assembly Soldering tag Cable holder Bottom mechanism plate Complete
Revision 0
May 1997
203FE - 205FCC - 205TCC
1 2
20
BOD20315.EPS
960122
3
4 5 6 7
8
9 10 11
12
13
14
COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031-96 84 64
= Loctite 243
Revision 0
May 1997
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 1 2 1 2 2 2 1 1 1 1 1 1 3
20
Remark
Spare Part No.
107 345 105 676 103 585 107 347 810 839 105 675 105 711 105 708 105 673 810 550 105 709 107 348 105 339 829 425
Description
Spring housing complete Base plate Locking gear Spring centre, 1st Washer Spring Washer Drive gear, 1st Shaft Washer Drive gear, 2nd Spring centre, 2nd Cover plate Screw
Revision 0
May 1997
203FE - 205FCC - 205TCC
21
BOD20316.EPS
960122
1
2
4
3
5
10
9 6 8
7
COPYRIGHT © 1996 ANDERS ENGSTRÖM ANDERS ENGSTRÖM, ILLUSTRATÖR Östra vägen 46 430 91 HÖNÖ TEL/FAX 031- 96 84 64
Revision 0
May 1997
Camera body 203FE - 205FCC - 205TCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 10 2 1 1 1 1 1 4 1 1 1
21
Remark
Spare Part No.
103 517 815 904 815 707 103 516 103 113 107 409 829 540 103 151 103 514 812 301
Description
Leather Spring Spring Washer Crank bayonet Crank support Screw Crank arm Slide Pin
Revision 0
May 1997
203FE 205FCC
Östra vägen 46 430 91 HÖNÖ tel/fax 031- 96 84 64 [email protected]
From serial No. 18ET10992 ANDERS ENGSTRÖM, ILLUSTRATÖR From serial No. 15EU10053
COPYRIGHT © 1997 ANDERS ENGSTRÖM
BOD20318.EPS
970513
22
2
3
1
4
9
5
8 6 7
Revision 0
May 1997
Camera body 203FE - 205FCC
Pos Pcs No.
1 2 3 4 5 6 7 8 9 1 1 1 1 3 1 1 1 1
22
Remark
Spare Part No.
815 707 815 904 103 516 412 105 826 401 412 323 412 104 103 514 812 301
Description
Spring Spring Washer Crank bayonet Screw Crank support Crank arm Slide Pin
Revision 0
May 1997