Text preview for : sc1_note.pdf part of panasonic gs35 Service manual: NV-GS6, GS17, GS18, GS21, GS25, GS28, GS35, GS38
Back to : NV-GS6EE.part1.rar | Home
1. Important safety notice Components identified by the sign have special
3. Parts marked "PT" are not used in any models included in this service model.
characteristics important for safety. When replacing any of these components. Use only the specified parts. 2. Do not use the part number shown on this drawing for ordering. The correct part number and part value is shown in the parts list, and may be slightly different or amended since this drawing was prepared. 3. Use only original replacement parts: To maintain original function and reliability of repaired units, use only original replacement parts which are listed with their part numbers in the parts list section of the service manual. 1 4. Parts different in shape or size may be used. However, only interchangeable parts will be supplied as service replacement parts. 5. Test point information : Test point with no test pin.
Example:
C6011 100P PT
C6011 PT
R6097 PT
Signal Waveform Note
How to read Signal Waveform 3 V1 1.0 Vp-p 1 Volts/Div 2 Time/Div 3 V1:Peak to Peak
0.5 V
20 µs 2
Voltage Chart Note
Voltage Measurement a. Color bar signal in SP mode. b. ---:Unmeasurable or not necessary to measure.
Schematic Diagram Notes Circuit Board Layout Note
1. Indication for Zener Voltage of Zener Diodes The Zener Voltage of Zener Diodes are indicated as such on Schematic Diagrams. Example: (6.2V)......Zener Voltage 2. How to identify Connectors Each connector is labeled with a Connector No. and Pin No. Indicating what it is connected to, in other words, its counter part. Use the interconnection schematic diagram to find the connection between associated connectors. Circuit Board Layout shows components installed for various models. For proper parts content for the model you are servicing, please refer to the schematic diagram and parts list. NOTE: Circuit Board Layout includes components which are not used.
Model Number Indication
Model numbers are indicated without "NV-GS."
Example: The connections between C.B.A.s are shown below.
Ref. No. of the connection parts such as lead cable, flexible cable which is supplied as a replacement parts.
POWER SUPPLY C.B.A. P1503
The Number of pins of the Connector.
MAIN C.B.A. P3004
244 (10 Pins) Connector No. on Main C.B.A.
SCHEMATIC DIAGRAM & CIRCUIT BOARD LAYOUT NOTES NV-GS6EE/GC, NV-GS17EG/EF/E/EP/EB, NV-GS18E, NV-GS21EG/EK/E/EP/EB, NV-GS25GC/GN, NV-GS28GK, NV-GS35EG/E/EP/EB/GC/GN, NV-GS38GK