Text preview for : _food_processor_©_.pdf part of Philips HR7725/B, HR7727/B Service Manual Robot Cucina - pag. 6



Back to : _food_processor_©_.pdf | Home

Cucina

Food processor HR 7725/B HR 7727/B

Philips Domestic Appliances and Personal Care

PRODUCT INFORMATION

The food processors are equipped with mechanical and thermal safety switches.
Motor power Voltage Cordset Speed settings Bowl capacity Blender capacity Speeds unloaded : : : : : : : : : 600 W 220-240 V ; 50-60 Hz 120 V ; 50-60 Hz 125 cm HR 7725 2 speeds + pulse HR 7727 variable speeds + pulse 2.5 l dry ingredients 1.0 l liquids 1.0 l liquids 2.0 l (max. contents) blender drive shaft 17000 rpm (max) acc. drive shaft 2150 rpm (max) acc. drive shaft 1400 rpm (min) HR 7725 - 5100 g HR 7727 - 5700 g HR 7725 - 410 x 273 x 375 HR 7727 - 410 x 273 x 510

Safety lock (item 1) Place the lid on the bowl in the right position. The appliance will only function if the arrow on the applinace is directly opposite the mark on the lid of the food processor bowl and the same holds for the other accessoires. The built-in safety lock will now be deblocked and you can turn the appliance on. Note that if both the blender jar and the bowl have been correctly mounted, only the blender will function. Important: If the appliance is used without the blender jar, the appliance will not function if the screw cap has not been screwed onto the attaching hole for the blender.

Weight in fancy box

:

Dimensions (l x w x h) :

Product meets the requirements regarding interference suppression on radio and TV.

Automatic resettable cut-out (part of item 7) To prevent damage due to overheating, the appliance has been equipped with an automatic cut-out system. This system will automatically cut off the power supply when the appliance overheats. If the appliance suddenly stops running: - Unplug the appliance - Set the knob to position 0 - Let the appliance cool down for 15 minutes - Plug the appliance in again - Switch the appliance on again

After the product has been repaired, it should function properly and has to meet the safety requirements as laid down officially established at this moment.

Published by Philips Domestic Appliances and Personal Care

Printed in the Netherlands

© Copyright reserved

Subject to modification

4322 277 00095 99/12
PCS 101 301

SERVICE INFORMATION
- HR 7725 - The blender coupling on the motor shaft has been

A separate drawing shows how to disconnect the speed selection knob.

provided with the customary left-hand thread. The drive coupling (item 11) can be detached by means of a hammer and a screwdriver. Strike the screwdriver with a short sharp blow and remove the drive coupling. Or block the acc. drive wheel (item 23) and thereby the rotor shaft, by sticking a pin through the hole (5 mm dia.) in the bottom plate.
- The top housing (item 29) can be removed by

detaching the snap connections by sticking a pin (or a screwdriver) through the small round holes (3 mm dia.) in the bottom plate (item 27) and the housing (item 12). The arrows in the drawing show the locations of the holes.
- HR 7727

First remove the pulse button (marked "M") as shown in the figure. Then unlock two snap connections to remove the variomatic knob from the top housing.

- In order to replace the speed selection or variomatic

knob, the locking lever (item 33) must be placed in its lowest position.
- The minimum speed of the HR 7727 can be set when

1 2

the pulse button (the button marked with an "M") is not mounted. The minimum speed (rpm) has been correctly set if the motor starts automatically and continues to run smoothly with the variomatic knob and the adjustable potentiometer in the lowest setting.
- The accessory drive shaft (item 15) has a locking piece

(item 14).
- The assembly of the accessories depends on the

1
- HR 7727

national version.
- For specific versions, the component configuration may

Remove the Poti gear (item 32) by turning it clockwise until the arrows face each other.

differ from the one shown on the exploded view. However, the actual components can be distinguished by their code numbers.
- Make sure that all functions, including the safety

devices, are working correctly after you have completed the repair.
L2 Speed High and Pulse

brown R

M1 D1 1N5406

red

F1

Speed Low MAINS R1 470k N L1 C1

F2

brown F1

BF white Rotor

black blue N1 violet

F2 N

B yellow

Change-over switch in braking position

HR 7725
Pulse brown R R4 470k R1 470k R5 1M Q1 C2 68nF L1 N1 L3 R2 1M F2 MAINS C1 Q2 On/Off blue N R3 27k brown F1 M red F1

DAP0535

BF white Rotor

black violet

F2 N

B yellow

Change-over switch in braking position

HR 7727

DAP0536

11 1 28 12

2 13 14 3 15 4 16 17 5 18 19 6 20 33 32

29

30

31

21 7 22 23 24 8 19 25

9

27 10

DAP0527

HR 7725 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 27 28 29 30 31 32 33 4203 065 62110 4822 214 12762 4203 065 62120 4822 532 13008 4822 462 11074 4822 532 13011 4822 361 11081 4822 361 11082 4822 466 11949 4203 065 62020 4822 502 14593 4203 065 62130 4203 065 62030 4822 214 12767 4822 214 12768 4203 065 62040 4203 065 62050 4203 065 62070 4203 065 62060 4822 535 10549 4822 530 10492 4822 492 11649 4822 528 11265 4822 358 10257 4822 528 11266 4822 520 10851 4822 466 11947 4203 065 62080 4203 065 62140 4203 065 62150 4203 065 62160 4203 065 62170 4822 492 11648 4822 492 11651 4203 065 62180 4203 065 62190 4822 522 10712 4203 065 62200 print + switch lever print plate brake coupling lever rubber piece air tunnel support ring motor 230 V motor 110 V coupling fork flex motor screw assy blender coupling housing print plate print plate locking piece drive spindle rubber sealing locking plate spindle assy rubber tube compression spring coupling piece tooth belt belt wheel bearing mounting plate bottom plate blender cover blender cover housing top housing top snap return spring snap spring switch knob switch knob poti gear locking lever x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

HR 7727 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

Directions For Use HR 7725 - 4203 064 11890 4203 064 11960 HR 7727 - 4203 064 11920 4203 064 11970 4203 064 11980 East Europe English Lithuanian Russian Latvian Slovak Estonian Polish Slovanian Czech Ukrainian Hungarian Croatian Rumanian

English, French, German, Dutch, Italian, Greec English, Swedish, Norwegian, Finnish, Korean English, French, German, Dutch, Spanish, Portugese, Italian, Greec East Europe English, Swedish, Norwegian, Finnish, Arabic, Turkey, Simpl. Chinese

PCS 101 302

51 57 61 62

52 52

63 54

53

58

64

65

59

66

67

55

68

69 50 60 56

DAP0529

HR 7725

HR 7727 x x x x x x x x x x x x x x x x x x x x x x

70

50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

4203 065 62210 4203 065 61990 4822 462 11083 4822 480 50477 4203 065 61810 4203 065 61860 4203 065 61940 4203 065 61820 4203 065 61930 4822 418 10343 4203 065 61880 4203 065 61870 4203 065 62000 4822 442 01336 4203 065 61840 4203 065 61960 4203 065 61950 4203 065 61970 4203 065 61980 4203 065 61830 4822 462 11055 4203 065 61850 4822 418 10342 4203 065 61890 4203 065 62220 4203 065 61900

gear wheel of whisk spatula insert of lid sieve juice extractor juice extractor storage box (4 acc.) kneading/mixing knife citrus press metal knife bowl (dry 2.5 l) balloon beater (whisk) double pusher (opt.) mono pusher bowl cover patato grating disc (opt.) grating disc (fine/very fine) slicing disc (fine/medium) grating disc (coarse/medium) combi disc (slicing/grating) french fries (opt.) insert of cover cover beaker sealing ring driven coupling knife unit

x x x x x x x x x x x x x x x x

71

72

73

75

74

DAP0530