Text preview for : Disassembly & Reassembly.pdf part of Samsung 740N Ensina a desmontar o monitor 740n
Back to : Disassembly & Reassembly. | Home
11 Disassembly and Reassembly
11 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the TFT-LCD monitors. WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling these components.
11-1 Disassembly (Simple - Stand)
Cautions: 1. Disconnect the monitor from the power source before disassembly.
1. Place monitor face down on cushioned table. Remove 3 screws from the stand.
2. Remove stand and front cover.
11-1
11 Disassembly and Reassembly
3. Lift up the back cover and Use the jig to remove the shield lamp.
4. Disconnect cables.
5. Lift up the shield and disconnect LVDS cable.
11-2
11 Disassembly and Reassembly
6. Lift up the LCD panel.
11-2 Disassembly (HAS-Stand)
1. Place monitor face down on cushioned table. Remove 2 screws from the stand and remove front cover.
11-3
11 Disassembly and Reassembly
2. Lift up the back cover and Use the jig to remove the shield lamp.
3. Disconnect cables.
4. Lift up the shield and disconnect LVDS cable.
11-4
11 Disassembly and Reassembly
5. Lift up the LCD panel.
11-3 Reassembly
Reassembly procedures are in the reverse order of disassembly procedures.
11-5
11 Disassembly and Reassembly
Memo
11-6